When you are playing it from the hard drive, how are you playing it? If you are only playing the video file, you won't see the subtitles, since they are not encoded into the video. Subtitles are overlaid on top of the video, so you'll have to use DVD playing software and then activate the subtitle stream in order to see it.
I am saving the file as an MP4 on the hard drive....
Message from Pegasys:
Dear Peter, thank you for your email.
After setting up the subtitles can you see them on Cut edit player?
Please try this:
- on Source stage > Track settings > Subtitle tag > choose the Subtitle stream number: and set the Default subtitle stream:
then check about it.
On the player check your output project, check if the subtitles are turned off, or check a setting to enable them and check.
In the source/track preview ….Subtitles YES In the Cut Edit preview ……NO..
[No menu selected…..]
In the Simulation…YES
In the Output [when start output]…NO
The movie now on the hard drive…NO..
Subtitle stream number…: Automatic [1 stream[s]] Default Subtitle stream….Automatic [subtitles 1] You said “and set the Default subtitle stream:… [Is the above correct….are these the default settings?] You said…“On the player check your output project, check if the subtitles are turned off, or check a setting to enable them and check.”
I cannot see a check box for the subtitles ????...unless I go into the options button/preferences… Under MPEG settings/subtitle display settings… I assume I can change text colour settings ?..That does not work.? .The text subtitles stay white… Hope you can help me further…
In my last mail regarding subtitles....not appearing in the output section
So I insert a title.....which is white text...
In the Options/MPGE settings...../Subtitle display...I change the font colour to green and tick the replace Font colour...
But the text stays white...
Can you explain what I doing wrong ? or is this a software problem ?
I am trying to make a DVD with TMPGenc but I don't understand how to fix this problem:
After my DVD is done and I use a DVD player, if I click on the "MAIN MENU'" or "ROOT MENU'" of the *control panel of the player*, I am redirected to THE LAST TRACK MENU' that I opened. Not to the main or root menu'. ;((
Why? I tried several players but the result is always the same.
I have a 1280X720 video that I want to change as follow : crop 16 pixels at the top and add 16 pixels of black at the bottom. I can't do that only with the 'crop' filter, because the mask option can only be added on the portion that is being cropped.
Basically, for those familiar with Avisynth, I want to do something like this :
So basically, you're just moving the entire video up 16 pixels?
If so, you can do it in Timeline mode.
Once in timeline editing mode, select your clip and then in the properties tab on the right side of the screen, type in -16 in the "top" field. This will move the video up, cutting off 16 pixels from the top and showing a black background at the bottom.
Hi all, I am a TMPGEnc Authoring Works 6 user and I would like to make a DVD.
Everything is fine apart the film subtitles that always look with a jagged border. I tried to change many subs options and fonts but the poor subs graphic quality is still there.
Any advise about how to improve the subs appearance?
If you are lucky, it might be a result of your media player not decoding the video properly. In this case you can try another media player.
If the subtitles are "hard-coded", meaning you can't disable them in TAW, you don't have much choice. They are now part of the actual video stream. Subtitles on DVDs are image files and can't be edited into another format directly. Possibly re-rendering it as a non-interlaced (progressive) stream might help.
If you find that TAW will let you suppress the subtitle track, then you have more choices. You can extract the subtitles as a PGS file and perform OCR on the file, with something like Subtitle Edit. However, your results will always have to be checked and corrected, usually based on the font of the original subtitle. This can be an onerous process.
Or you can search for SRT subtitles on one of the many subtitle sites on the web. Download the appropriate language file, then add it into your project using TAW. While I use this when I can, be aware that the accuracy of these can vary and, obviously, you are out of luck if you can't find subtitles for your particular video.
If you can't disable the subtitle, I don't think any procedure will help. Maybe someone else has a solution.
I was wondering if anyone can explain exactly what size adjustment does in terms of actual video settings? Is there a place I can look to see what the algo decided? I have a number of smaller ( 350M, H.263) files that I want to write to blu-ray, and their average bit rate is only around 2K. Some of then contain slide show stills and require an even smaller rate to encode.. . I would like to preserve what quality is there, and H.264 should be able to do that at or near that same bitrate (Right?) , but the default settings want to make them into full bitrate pretty Blu-ray files.
I understand I can adjust the encoding bit rates manually, but I was wondering if there is a way to compare what size adjustment does with the manual settings? IS one going to have a better result than the other? IF so, why?
I'm not quite sure what you are mean by "size adjustment". The source "size" in megabytes has little to do with the quality of the video. If you mean resolution (pixels), then all blu-rays are 1920x1080. That doesn't mean they will fill the screen on your TV or other HD monitor, as there are different aspect ratios for different content.
It's important to understand that bitrate is just one of the myriad parameters involved in rendering a video. "Full bitrate" has no meaning. Any re-rendering will degrade the original source, although it may be impercetible. Rendering is just as much art as science, but TAW does a fair job with most source material.
Why don't you just make a sample blu-ray and see the results? If you see problems, then you can post specific questions.
Is there a way to copy all of the text attributes from one menu item to another item(s)? I see a way to copy effects, but it would be very useful to format one item, like an episode in a TV series, then apply that formatting to the remaining items. I think I must be missing something, as that is a feature of some other authoring tools.
The best thing you can do is use the batch font edit function in the Edit Menu of the Menu stage.
This will allow you to set the font, the weight, the size, etc. and then apply them all items or to certain types of items (click the "Coverage" button to select what types of items to change).
>Hi, I can do it " Output Stream Type: MPEG-2 Program (VBR) - Stream Format: MPEG-4 AVC" TMPGEnc Video Mastering Works 5. Because this is set Adobe Encore don't transcode.
>But I can not make this setting TMPGEnc Video Mastering Works 6.
>how can i do this setting TMPGEnc Video Mastering Works 6?
i got this problem lately with my new system.. the program can't utilize all core while encoding 2 passes x264..
the first pass use all the cores but the second pass use only 1 core :(
this problem happen from time to time.. sometime use all core and other only 1.
i tried 220.127.116.11 and now 18.104.22.168 same problem.
asus rampage apex x299
32gb memory 4x8
960 pro nvme hdd
all driver are up-to date
hi, I think this is related your source file, what is it?
If for ex. it is an AVI file, probably the codec used does not use all cores to decode.
You may need to check in Options > Preferences > the Multithread settings, as well as check if the CPU cores are recognized in CPU/GPU settings.
I have a licensed copy of TMPGEnc 4.0 XPress (EN) and wanted to try Mastering Works 6. I downloaded a trial version which worked fine until I tried using the Timeline mode. That action locked up my computer and I had to do a hardware shutdown which corrupted my OS(Window 7 -64 bit).
I was able to recover my OS, but, when I tried to uninstall the program the uninstaller ran for over 5 minutes without stopping. I just got a busy mouse icon. I'm concerned that whatever the program did to my system is still a problem. Any advise on how to get this program off my computer, without using "Windows Uninstall" would be greatly appreciated.
Also, would be interested if anyone else had this problem and if so, what did you do to fix it.