i got this problem lately with my new system.. the program can't utilize all core while encoding 2 passes x264..
the first pass use all the cores but the second pass use only 1 core :(
this problem happen from time to time.. sometime use all core and other only 1.
i tried 220.127.116.11 and now 18.104.22.168 same problem.
asus rampage apex x299
32gb memory 4x8
960 pro nvme hdd
all driver are up-to date
hi, I think this is related your source file, what is it?
If for ex. it is an AVI file, probably the codec used does not use all cores to decode.
You may need to check in Options > Preferences > the Multithread settings, as well as check if the CPU cores are recognized in CPU/GPU settings.
I have a licensed copy of TMPGEnc 4.0 XPress (EN) and wanted to try Mastering Works 6. I downloaded a trial version which worked fine until I tried using the Timeline mode. That action locked up my computer and I had to do a hardware shutdown which corrupted my OS(Window 7 -64 bit).
I was able to recover my OS, but, when I tried to uninstall the program the uninstaller ran for over 5 minutes without stopping. I just got a busy mouse icon. I'm concerned that whatever the program did to my system is still a problem. Any advise on how to get this program off my computer, without using "Windows Uninstall" would be greatly appreciated.
Also, would be interested if anyone else had this problem and if so, what did you do to fix it.
I downloaded the trial version of the V6 software. I was testing using three Mp4 files converted from Edius. Two were an hour long each (high school plays) and the other an 8 minute clip. Total time 1:50:00. So I made a basic custom menu with three menu boxes for the three clips. I was in the middle of simulating the environment when the program crashed. And that is my question...is this not a stable program? I really don't want to plunk down $100 to find out the system isn't stable. I was hoping that if this authoring worked I could buy the program and finalize but sadly, when it crashed it took all three hours of work setting up the chapters and menus with it. Really disappointing. Even before it crashed I couldn't find a save button so I was hoping it was automatically saving as I went along but alas, no such luck. Lost it all. So, what is the deal with this?
first of all: I am very happy with TMPGEnc 6. I like working with it and the usability of the software i think is awesome. Also Hurray! for the Batch-Rendering-Feature.
However since i first started using TMPGEnc i have the problem, that the UI is reacting very slowly on changes.
For example: When i insert a clip into the timeline i have to wait 5 seconds. When i want to set the current play-marker somewhere on the clip it takes another 5-8 seconds until the preview-window updates. Same when i try to split a clip: At least 10 seconds until something is happening.
The other major thing is playback in preview-window: While the sound is on time, the preview-window is never keeping up. It mostly stops displaying anything at all, only a freeze frame. When i hit the stop-button the preview-image updates after 5 seconds.
Does anyone have a suggestion how this can be eliminated?
My computer-specifications are: Intel Core i7-2600K - 3,40 GHz, 24 GB RAM, 64-Bit Windows 7, GeForce GTX 1070
I have already set the option "Pre-Rendering - Save Folder" to RAM so it's not caching on the harddisk, but no change.
Mostly i am rendering videos 1920x1080 - 60 FPS and 2440x1440 - 60 FPS.
I am open for any suggestion. It is so hard to work with the software, when you have to wait every few seconds for the ui-update.
Just to clarify: If no one has a solution i am also very happy to hear from your user-experience. Do you have the same problem when working with clips? Does your TMPGenc react immediately when changing properties or moving clips? Any help or review would be appreciated, so i may be able to narrow the problem down.
Just upgraded to AW6. In 5 I couldn't get the first chapter to be highlighted when moving forward or back to menu pages and I can't get it right in 6 either. In 6 I get it to highlight the first chapter when moving to 2nd page but when going back to first page it highlights the 'next' button or the last chapter on the page. I have tried virtually every combination of 'Global Settings' and 'Page Local Settings'. Does this function just not work or am I the idiot??
I've tried to do it too and have the same results as you. Maybe it's a bug or maybe they didn't describe the function correctly, because the way it's described, you should be able to highlight the first chapter/track in a page.
I have some FLV files with Speex audio, I have noticed that this program supports FLV files but it will not load the Speex audio portion of the files. Does anyone know of a way to do this or if speex audio decoding will be added in a future version?
I had to reload Windows 10 last week and reinstall. Today I'm seeing a crash while encoding:
An error occurred communicating with the output process (6)
Exception Code: 0xc0000005
Faulting Address: 0x539f9ee6
Faulting Module: MovieMPEG.vme (Base address 0x53760000)
Additional Information 1: 0x00000000
Additional Information 2: 0x00000018
I did open a support ticket, but I thought I'd paste here in case someone has something easy to try/change. Since used it work on the same hardware, I'm assuming it's related to a change in the environment. I'm looking for some ideas on where to look since it's a new OS load.
As an extra precaution, you can also download CCleaner Free and set than one to scan your registry afterwards, which might still be leading to TVMW5 and its MovieMPEG.vme, which after all was completely revoved by using Revo. https://www.piriform.com/ccleaner/download
Using these two in combination should get completely rid of any traces of TVMW5, so you can do an actual 100% clean fresh instal of it again.
The automatic bit rate setting does not seem to work properly because if I have a source that is, for example, a constant 25 Mbps, the auto bit rate setting sets itself to 12.4. It also overshoots the maximum bit rate by quite a bit and sets it to 49.6 Mbps. The format I am seeing this behavior on is MP4 H.264/AVC and the source video is the same. In other words, I output something using the MP4 H264.AVC format and then used that as my source.
I asked Support the same question and this is their response, which does not seem to make any sense to me.
"It checks the resolution of the source file and based on that it is
Is not about making the source and the output to the same bitrate, this
function is to adjust the best possible bitrate for output.
So in other words it is a function for not make the bitrate too low.
If you want to output in the same bitrate you have to set it manually in
the Bitrate settings without using the automatic function."
If the source is 25 Mbps, the setting the output to 12.4 would result in quality loss I would assume, right? I know that is not a given, but it seems reasonable.