TMPGEnc 4.0 XPress BBS

Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.


TMPGEnc 4.0 XPress BBS [ Sorted by thread creation date ] << < Prev.   [ 26 / 54 ]   Next > >>
Classify Title User name Reply Last update
Question It suddenly stop encoding ulcaman 0 2009-06-26 06:00:16
Question using tmpgenc4 spurs engine but still get 100% CPU usage ! Martin wichtmann 2 2009-06-27 02:39:08
Question SpursEngine - not working better? Ryan 1 2009-06-24 02:36:59
Request dolby digital (ac-3) 5.1 & mkv support eddman 1 2009-06-27 00:06:05
Question Poor mpeg 4 compressions darren 0 2009-06-19 21:10:39
Question Cannot convert to wmv aesir 0 2009-06-17 11:24:49
Bug report Long slideshow can't loop audio natong 4 2011-01-12 03:20:28
Question bitrate adjustmen, higt motion or low motion kenshyro 2 2009-06-10 06:20:54
Question Converting NTSC 4:3 to PAL 16:9 Nimbus3 1 2009-06-06 00:07:26
Question Cannot Allocate Memory for DLL David40 0 2009-06-03 03:33:27
Question problem with output videos fcz 1 2009-06-06 00:14:28
Request Support for Windows 7 nezuko 12 2009-08-21 05:02:50

TMPGEnc 4.0 XPress BBS [ Sorted by thread creation date ] << < Prev.   [ 26 / 54 ]   Next > >>
Question - It suddenly stop encoding No.58912
ulcaman  2009-06-26 06:00:16 ( ID:yppi6snwquc )   [ Delete / Reply with quotation ]

TMPEGEnc 4.0 Express suddenly stopped during encoding MS DV AVI --> MPEG2 DVD

I produced about 13 files (13 Chapters for DVD) and encoding it 4.0.

Most of them encoded well but 2 files suddenly stopped about 48-49% point (in 2 pass encoding mode)
I tried again but the result was same.
YOu know 48~49% point in 2 pass encoding mode is the end of analysing process.

Is there anybody who know this problem?



Question - using tmpgenc4 spurs engine but still get 100% CPU usage ! No.58909
Martin wichtmann  2009-06-25 23:39:07 ( ID:dfditwmikpk )   [ Delete / Reply with quotation ]

I'm using the spurs engine plug-in with tmpgenc4 to convert some large 1080p file to 720p H.264/AVC, but the speed is not was i think it should be. Its taking 2 hours and 20 minutes to convert a 1080p movie to 720p H.264/AVC, does that seem right ?? Also while its converting the cpu usage is 100% and my cpu is getting to the +52 degrees.... i thought this would take the load of the cpu and just use the cpu to do the audio part and encoding to 2 channel stereo aac wouldn't require 100% i wouldn't think. I'm using the firecoder blu card (for the spurs engine) and my system is win XP, amd X2 64000+, 2 gig ram. Is there a way i can check to see if all cores of the firecoder is being used and how do i check the temp of the firecoder card ?? it doesnt show up in speedfan.

Heres a screenshot of what i mean :

http://www.flickr.com/photos/africanmarty/3660553067/sizes/l/

Regards Marty.


tkrave  2009-06-26 21:03:49 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

How long is your movie? 2 hours and 20 minutes actually sounds pretty good for converting a full-length HD movie.

Are you using the SpursEngine output profile in the Format Stage?


tkrave  2009-06-27 02:39:08 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

Looking at the number of frames you have and your framerate, it looks like that's a 2 hour movie, which means you're not too far from a 1:1 encoding time. For HD video, that's really good.

As a comparison, I just converted a 12 second, 24fps 1080p QT video to DivX. It took 3 minutes, 31 seconds. Imagine if it were a 1 hour video; it would have taken me 17.5 hours at that rate!



Question - SpursEngine - not working better? No.58907
Ryan  2009-06-24 01:12:27 ( ID:jwb9ex6f4wm )   [ Delete / Reply with quotation ]

I have a Q9300, 6GB ram, $1000 desktop, I'm compressing 640x480 MPEG 2 (9MBPS) to mpeg 4 500kbps same resolution.
I just got the winfast pcx1100 and spursengine plugin, it can compress a 30" video in about 7 minutes but it only took 10-11 minutes before, so only a 50% speed improvement, not 200% like the demos???

Also, I can't seem to find any way to get the resolution right - it puts these 5px black bars on the top and bottom that I had been dealing with before by making it 640x470 in the output.

As a side note - I could not plug in the power connector because the cable didn't reach, would this slow it down???
THanks!


tkrave  2009-06-24 02:36:59 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

For your black bar problem, try this:

Use the picture resize filter and set it to "Centered (custom)", 640x480. Then do as you've been doing and set the output size as 640x480, 1:1 pixel. Check the preview to make sure there's no black bars.

I don't have the winfast card, but if there's a power connector that should be connected, then that could be slowing it down. It may just be to power the fan, and if the fan isn't on, then the spursengine processor might be getting too hot.



Request - dolby digital (ac-3) 5.1 & mkv support No.58905
eddman  2009-06-23 18:21:49 ( ID:wcrhpskaumc )   [ Delete / Reply with quotation ]

I really like this program because of it's quality and simplicity, but it's a real pain not having ac-3 5.1 support. After so many requests by so many people, you should have already implemented this feature.

The other request I have is the MKV file output ability. I know,it's a rouge file format, but no harm would be done by adding it while there is such a huge public support behind it.

Thanks


singsing  2009-06-27 00:06:05 ( ID:ywaz8.lpx6j )   [ Delete / Reply with quotation ]

signed.



Question - Poor mpeg 4 compressions No.58904
darren  2009-06-19 21:10:39 ( ID:qpy9ab1zk7o )   [ Delete / Reply with quotation ]

I have source files that are h.264 at 10mbps.
I need to encode these adding fades at the head and tail.
I use TMPGEnc 4 XPress for this.
Whenever I do this I get a problem with the video.
There is always a spot where the video starts to skip and get jettery.
Also, I sometimes get a green line on the bottom of the frame.
Does anybody else have problems like this.
Thanks.



Question - Cannot convert to wmv No.58903
aesir  2009-06-17 11:24:49 ( ID:qdtppen3gym )   [ Delete / Reply with quotation ]

I am using the latest version of TMPGENC installed on a Windows XP x64 quad core system. Any video format conversion works except when converting to Windows Media Video file output". When I select it I get an error "Read error occurred at address xxxxxxxx of module 'Moviewm9.vme" with 00000000. I do have all necessary codecs installed and Windows Media Player 11.

I tried the same thing on another XP x64 PC and it does exactly the same. Is this a bug, an incompatibility with x64 systems maybe? I am open to suggestions on what to try next...



Bug report - Long slideshow can't loop audio No.58900
natong  2009-06-10 15:09:42 ( ID:i3i1h1sfuw2 )   [ Delete / Reply with quotation ]

Long slideshow can't loop audio

I have 100 pictures for slideshow and 2 mins audio.
The slideshow can't play song as loop. Only play one round and stop, no song any more.


tkrave  2009-06-10 19:21:25 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

Unfortunately, looping the audio isn't possible...it's not even an option. You can either adjust the slideshow to the length of the music or you don't and the music will end and the slideshow will keep going.


natong  2009-07-05 10:53:48 ( ID:i3i1h1sfuw2 )   [ Delete / Reply with quotation ]

So sad.

These is very important.


krk  2011-01-11 06:10:12 ( ID:83bfjvz0uof )   [ Delete / Reply with quotation ]

Audio looping option in slidwshow is missing. Any plans to include in for the future releases?


tkrave  2011-01-12 03:20:28 ( ID:esk4fdefcg2 )   [ Delete / Reply with quotation ]

Hopefully it's in the next version, but we'll have to wait and see.



Question - bitrate adjustmen, higt motion or low motion No.58897
kenshyro  2009-06-06 20:35:45 ( ID:11y4ube/uuf )   [ Delete / Reply with quotation ]

Hello everybody, I am compressing a mkv to divx, what should I put in the bitrate option adjustmen, higt motion or low motion, "thank you very much

---------------------------------------------------

Hola a todos, estoy comprimiendo un mkv a divx, ¿que debo poner en la opcion bitrate adjustmen, higt motion o low motion?, muchas gracias


tkrave  2009-06-09 22:49:05 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

I think it depends on the content of your video. If there's a lot of motion such as a fast-paced movie or sports event, then choose high motion. However, high motion will probably set the bitrate higher, resulting in a larger file size.


kenshyro  2009-06-10 06:20:54 ( ID:11y4ube/uuf )   [ Delete / Reply with quotation ]

ok, very thank



Question - Converting NTSC 4:3 to PAL 16:9 No.58895
Nimbus3  2009-06-04 12:54:29 ( ID:htqiz7jybm. )   [ Delete / Reply with quotation ]

Just the simple quastion: The eseast way to convert a movie from NTSC 4:3 format to PAL 16:9. I'm new to this an need some hints.


tkrave  2009-06-06 00:07:26 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

When you output the file, set it to PAL and the aspect ratio to 16:9. It's that easy. You'll have black bars on the sides of your video though.

Now, things will get a little more complicated if your NTSC 4:3 movie has letterboxing encoded into the movie. If it does, then you'll have to crop those out with the crop filter.



Question - Cannot Allocate Memory for DLL No.58894
David40  2009-06-03 03:33:27 ( ID:rc2rimbg/yn )   [ Delete / Reply with quotation ]

While encoding using the Canopus Lossless avi codec, the conversion failed at 20% with the error message "Cannot Allocate Memory for DLL"
Anyone else encountered this error and knows what to do about it?
Thanks



Question - problem with output videos No.58892
fcz  2009-06-02 23:11:24 ( ID:gkze3gu7tcg )   [ Delete / Reply with quotation ]

hi,
after few days using TMPGEnc 4.0 XPress, and i'm getting really frustrated with this.
i'm using it to convert mpeg files which i record with my tv tuner to divx.
the problem is that i really can't find the right combination of parameters; the main problem is that the output
files mostly are "cut-off", the video looks like it's zoomed.

i noticed that under format tab, where i can change divx output settings, i can't modify height of video,
it's always 480 even though my videos are 720X576; maybe that's the problem?


tkrave  2009-06-06 00:14:28 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

You may just need to change the "Output profile type" to "Home theater" or "HDTV." That should allow you to input 576 as the height.



Request - Support for Windows 7 No.58879
nezuko  2009-06-02 20:00:56 ( ID:9iwsddndxyc )   [ Delete / Reply with quotation ]

I installed Windows 7 x64 RC build 7127, and TMPGEnc XPress 4.7.1.284 won't start at all. Runtime Error 216 in address 066B3DD3. The software didn't start at all. and I have to end process the aplication to close. It seems have something to do with VMESys.dll.

Problem signature:
Problem Event Name: APPCRASH
Application Name: TMPGEnc4XP.exe
Application Version: 4.7.1.284
Application Timestamp: 3a8d5743
Fault Module Name: VMESys.dll
Fault Module Version: 1.1.2.6653
Fault Module Timestamp: 2a425e19
Exception Code: c0000005
Exception Offset: 00003dd3
OS Version: 6.1.7127.2.0.0.256.1
Locale ID: 1057
Additional Information 1: 9251
Additional Information 2: 92518e88b9db8c2be53f8f684976de7c
Additional Information 3: 3e3a
Additional Information 4: 3e3aeab4ac571d2a08000c256853cf5d


Another, TMPGEnc Autoring Works also didn't start at all. But the error is different. At address 0018FF31, Read error occured against FFFFFFFF.

Anyone having luck in execute those 2 software in Windows 7 x64 build 7127?
Thankyu.


Johnny  2009-06-03 04:37:25 ( ID:x2r.poqjuaf )   [ Delete / Reply with quotation ]

same problem here, on RC 7100.


solon2099  2009-06-03 13:23:21 ( ID:ngrtk68nm.w )   [ Delete / Reply with quotation ]

same problem...help ?!?


VicBond007  2009-06-03 22:23:13 ( ID:63ehvq23dln )   [ Delete / Reply with quotation ]

Same here on 7137.

Can run it in Virtual XP, but that's hardly a solution.


richronn  2009-06-04 00:24:00 ( ID:rbrmoohupl. )   [ Delete / Reply with quotation ]

Yep, I got the same problem also.. and I just downloaded the latest #7 X64 from Microsoft last night updated it and TMPGEnc 4.7.1.284 still won't work...


tkrave  2009-06-05 23:59:00 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

Well, seeing as how Windows 7 isn't final yet, support for it will be spotty at best. Once it's finalized, I'm sure support will be added...at least that's what I'm hoping.


nezuko  2009-06-08 16:48:30 ( ID:yj65di8yu8. )   [ Delete / Reply with quotation ]

So, in virtual XP TMPGEnc still can work, but is there difference from when you run it in the host like Vista?


Ken  2009-06-14 06:48:54 ( ID:fy4wibztkt2 )   [ Delete / Reply with quotation ]

Anybody have any luck sorting this out?


Duane  2009-06-16 01:47:10 ( ID:5micuiccj3g )   [ Delete / Reply with quotation ]

It runs fine for me on x64 build 7100, but it won't open .mkv files. Seems to open .avi and some others though...


Ken  2009-06-18 22:28:52 ( ID:zw57sn0bdqo )   [ Delete / Reply with quotation ]

it crashes on me prior to even getting to the splash screen.


nezuko  2009-07-06 21:04:55 ( ID:yj65di8yu8. )   [ Delete / Reply with quotation ]

Well, in other topic I find that another user which has the legit licensed serial number have their TMPGEnc Authoring works 4 and XPress 4 work well in windows 7.
they say that cracked version of those 2 software won't run under win7. Come to think of it, 7 and vista is the same kernel, so may be they right afterall. Just wait for the crack maker to release their updated crack which works fine with win7.


Endurion  2009-07-26 22:26:04 ( ID:eylg1qf.def )   [ Delete / Reply with quotation ]

You need to reinstall TMPGenc properly, using compatibility settings.

Right click the installation file and choose "properties" then "compatibility" and check the box to "Run Program As" and choose Windows Vista SP3.

That should help.


muitommy  2009-08-21 05:02:50 ( ID:4i.nyuyhdjm )   [ Delete / Reply with quotation ]

i have tried vista sp2 comp. mode in installations, didn't help either. (i don't got sp3 options)



TMPGEnc 4.0 XPress BBS [ Sorted by thread creation date ] << < Prev.   [ 26 / 54 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.