Hi, recently I got my new PC build and installed my old copy of TAW5 and noticed it never used the CUDA cores for rendering, I enabled cuda in the properties of TAW5 and all but CPU 100% all the time, do I have to setup CUDA on my video card or something? I have all driver updates, making BLU RAY disc from HD Avi files. Thanks!

RYZEN 3950X
Geforce RTX 2070
128GB DDR4 3200
1tb M2 drive System (and Programs)
2tb M2 drive scratch (project files)

I see that a chapter can have a font and font size change, but is there an APPLY TO ALL chapters option...with 20-30 chaptersits very time consuming changing individually

is there a way of Setting defuakt fonts for chapter names ? also can i download a PDF of the manual for offline viewing > thanks

Many of my files are marked in red RE, meaning they will be re-encoded, is there a way of preventing this , with the inevitable quality loss ? Thanks

Even with the reincoding of videos there is no noticeable quality loss.

I have a 59.94 progressive source for media that is originally 24p.
What settings should I use to achieve 3:2 pulldown & transcode to 1080p24 ??

or will setting the output fps to 24-progressive just work by magic ?
Remember the source is 59.94 *progressive*

just did a quick test without any filter and plain conversion with 59.94p as input and 24p at encode stage: as one could expect, the result is an alternance of moments with perfect motion and moments with stuttering....
So, please what filter settings should I use for this scenario ?
Source is DNxHR in MOV container.

The only way I've seen it work in the past is if it was done through AVISynth using the VFAPI loader, but it appears that that no longer works. That's the method that worked with TVMW5, but since TVEM6 I ended up having to turn to MeGUI to encode 24p 720p materials. TVMW in any current form is not the tool to use for that anymore, unfortunately.

I am a happy TMSR5 user since many years.
I have 5.0.22.28 fully licensed up and running on my Win10/1903 machine.
When I run the 5.2.23.29 installer, I get a "The specified acccount already exists" message, then the installation rolls back & aborts.

I have no clue....Any idea ???

The A/V on this machine is Windows' built-in Windows Security

Dear TMPGEnc,

Please answer this question !
I tried to fill a Support request, but when validating the questionnaire, I allways get "CUDA function has not been entered."

I DON'T KNOW HOW TO REACH YOU NOW TO GET SUPPORT !
I AM A RETURNING PAYING CUTOMER !!!

Same problem here. The update ends with the same error message.

Having exactly the same issue. You'd think they would have fixed it by now.

I've reported the issue to Technical Support.

OK, this was the response from Technical Support:

"The error "The specified account already exists" occurred during installation or uninstallation.

If the error happens, some functions of the Windows installer may not work properly.

Please try the following troubleshooting tool provided by Microsoft.
https://support.microsoft.com/en-us/help/17588/windows-fix-problems-that-block-programs-being-installed-or-removed

If the above download link is not available, please download it from the following link.
https://download1.pegasys-inc.com/download_files//MicrosoftProgram_Install_and_Uninstall.meta.diagcab"

What worked for me was running the MicrosoftProgram_Install_and_Uninstall.meta.diagcab file from the second download link. It scans for problems and then asks 'Are you having a problem installing or uninstalling a problem ?'. I chose 'uninstalling'. It then checks the registry and gives a list of programs to choose from. Select TMPGenc MPEG Smart Renderer 5 on the list. It then asks 'Uninstall and clean-up ?'. Select 'Yes, try uninstall'. It then fixed the problem and I was able to install version 5.2.23.29 successfully.

Hope that helps others.

@WorBry

That worked for me too, thanks for sharing !

I have been trying to generate a slideshow using a constant bitrate. So far I have not been able to get that to work. I have tried to generate mp4 (H.264/AVC), mpeg2 and a few other types and always set the "Rate Control Mode" to "CBR (Constant Bitrate)". When I inspect the output file the bitrate is always variable and is not constant.

Is this a bug or am I missing some other option?

For me works? Now a check this:

Video Mastering Works 7 settings:
Generic format: MP4
Stream Format: H.264/AVC
Video Encoder: x264 ...=CPU
Rate Control Mode: CBR <---------------------

MediaInfo on output file:
General
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42 (mp42/isom/avc1)
File size : 767 KiB
Duration : 8 s 91 ms
Overall bit rate mode : Constant <---------------------
Overall bit rate : 777 kb/s
Encoded date : UTC 2020-08-24 15:08:08
Tagged date : UTC 2020-08-24 15:08:08
Writing application : TMPGEnc Video Mastering Works 7 Version 7.0.15.17

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L5.1
Format settings : CABAC / 7 Ref Frames
Format settings, CABAC : Yes
Format settings, Reference frames : 7 frames
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 8 s 91 ms
Bit rate mode : Constant <---------------------
Bit rate : 458 kb/s

I am about to build a new computer and would like to transfer my Authoring Works 6 licence from my old computer to it - is there a way to do this?

Many thanks,

Mark A.

As I understand it this is allowed under the licence.
Just make sure you have your valid key details, save any projects/templates etc. that you want to keep then uninstall it from your old computer.
Do a clean install on your new machine and using your licence code it should connect to the internet and activate it on your new machine.
Just make sure your old machine does not also try to re-activate it.

See here: https://ssl.pegasys-inc.com/webapp/faq/detail/lang/en/FaqID/39/product/238

If I open in TVMW7 MKV with DTS, video ok, but audio tracks not show. TVMW7 not support DTS? Really?

Freeware Avidemux support DTS...
Freeware HandBrake support DTS...
Freeware MeGUI support DTS...
...

?

Just download and install LAV Filters from Videohelp.

Then in TMPGEnc go this path: Preferences => Input/Output Format List => File Reader Setting
Here de-select all, accept MPEG File Reader and DirectShow File Reader

Then you get import support for even DTS-HD Master and Dolby Atmos.

Those free tools you mention, use the very same open source DirectShow filters as LAV Filters are delivered with.

If Pegasys had to pay for the actual codecs from Dolby and DTS, then you can count on that the TMPGEnc softwares would be at least 6 times more expensive, which is rediculous when you can use DirectShow filter packages like LAV Filters instead.

Is there a way to output Atmos?

Hi!
Original version from mastering works 5, 6, and 7, not trial.
Some video output have some stuttering problem.

I've tested with "For a Few Dollars More" bluray input.
original bluray have vc1 codec, my output is hevc and avc (x265 and x264 respectively).

Can I do Timecode Burn-in from the original recording TC?

I tried it using the proper settings under Titles>Subtitles and it just creates source TC from "0". What might I be doing wrong? Thanks in advance

TVMW7 - convert HDR source to any output SDR format - no problem. BUT. Colors. Default change ColorProfile not correctly recompute colorspace. Colors in SDR video from HDR source is faded. I tested "Color Correction" filter, but any setting not correctly set SDR color.

Is any possibility correctly recompute colors when convert HDR source do SDR destination in TVME7?

thanks for info
B.

How my fault!:-) In EDIT page is needed use COLOR MANAGMENT page, and then in FORMAT page COLOR PROFILE page. Eee on two places same information/settings but OK. Colors after HDR to SDR conversion is "aggressive", but i test TONE MAPPING.

= all is ok:-)

After many many days of experiments and many many days of encoding - HDR to SDR conversion in TVMW7 not work corretly/very bad implementation. Colors always "burn out". I check HDR source (2160p and 1080p) on HDR display, SDR source (2160p and 1080p) on SDR/HDR display and compare with reencoded HDR to SDR in TVMW7 (2160p and too 1080p) - colors always "unreal" and brightness to high (always). Small details destroyed. Yes i check many combinations of WorkingColorSpace, ToneMapping and Maximum Luminance, combinations of input Working Color Space (primaries and transfer) and Color profile - nothing correct this. And filter "Color Correction" too useless.

Result:
TVMW7 encoding HDR do SDR - Perfect
TVMW7 encoding SDR to SDR - Perfect
TVMW7 encoding HDR to SDR - Inapplicable:-(

...correction (typing error)

Result:
TVMW7 encoding HDR do HDR - Perfect
TVMW7 encoding SDR to SDR - Perfect
TVMW7 encoding HDR to SDR - Inapplicable:-(

...i check others SW (FFMPEG, RipBoot264 etc.) and result:
- conversion BT2020(HDR) to BT709(SDR) in *ALL(!)* others sw WITHOUT PROBLEM
- conversion BT2020(HDR) to BT709(SDR) in VMW7 just NOT WORK:-(

All other freeware(!) SW corretly transfer colors, in paid VMW7 color
burnt out, detail lost etc.:-(((

B.

p.s. ...example for working conversion:
"c:\Program Files\FFmpeg\bin\ffmpeg.exe" -i "<x>:\<source>" -vf zscale=t=linear:npl=100,format=gbrpf32le,zscale=p=bt709,tonemap=tonemap=hable:desat=0,zscale=t=bt709:m=bt709:r=tv,format=yuv420p -c:v libx265 -crf 18 -preset faster -map 0 -c:a copy "<x>:\<target>"

= first encoding in FFMPEG (convert BT2020 to BT709), second encoding in VMW7 to final format - this is not a long-term solution:-(((

You need the correct LUT files (.cube) for being able to open and show HDR videos correctly.
I have a source for such a place:
https://originaltrilogy.com/topic/Info-Guide-for-Working-with-4K-HDR-Blu-ray-Rips-in-SDR/id/74681
In the bottom of that guide, there you can find and download his LUT files.

Those you just download and copy to a folder, example called LUT, at the same place that TMPGEnc Video Mastering Works 7 is installed:
C: => Programs => Pegasys inc

When then wanting to use one of the LUT's, then after opening the video, then under Video Properties, find the word LUT and click on Settings.
Then choose Import File and find the location where you put the LUT's, choose one and then open the LUT.

One specific i just had a lot of success with is the one named: Rec2020ToRec709_CSTCreativeSW
Using that one and making some small adjustments to Contrast, Gamma and Chroma, i was able to create a PERFECT 1080p standard video as MP4 out of HDR versions of WandaVision.

Suggest also saving the adjustments you made to Contrast, Gamma and Chroma as a new template, so you don't have to do these adjustments each time you work with a HDR video.

In my limited experience so far, I find that TMPGEnc Video Mastering Works maps the HDR video to SDR quite well, but with a tendency to burn out the highlights with some tone mapping options.
We have 7 options for tone mapping: Disabled, Hard Clipping, and Soft Clipping at 50%, 60%, 70%, 80% and 90%. I wish I knew exactly what these settings mean, but in practice, with my data, they all give quite similar results, with the Disabled and Hard Clip more inclined to show a blown out white as slightly pink. The 50% Soft Clipping gives the best result and seems to be about optimum for my material. However, it would be nice to have lower values available, such as 40%, in case some scenes needed it. Some control over the shape of the softening curve may also be useful.
A histogram display with the ability to move independently any shadow hump or highlight hump, left or right, along the tone scale axis would be good.
I don’t have anything to show the histogram of HDR video, but it could be that other videos have more pixels in the high-level range, and that may be the reason for Bullhead’s poor experience.
A simple manipulation of the tone mapping curve is of course not the only way to compress dynamic range. A better approach would be some sort of scene analysis that first breaks the picture up into objects, or into shade and well-lit regions, with feathering of the boundaries between them. It seems to me that the Shadow/Highlight adjustment in Adobe software has some elements of this approach. LightMachine is a plugin for Photoshop that certainly does that for images.
As an example to illustrate the limits of simple tone mapping, consider a building with its façade partly in shade and partly in full sun. Let the wall be painted, say, a light brown, with the trim around the doors and windows painted a dark brown, which happens to be the same colour as the part of the wall that is in shade. Now, if you attempt to soften the shadow on the wall by increasing the brightness of all pixels that have the shadowed wall colour, the trim around the doors and windows that are in sunlight will also be lightened erroneously. Lightmachine attempts to solve that problem by identifying large darkish areas as shade and ignoring smaller objects that have the same darkness. It doesn’t do a perfect job of course!