I cannot make smooth videos with this latest firmware. I have the right pc with GTX970, 32Gb RAM and 6core processor. My original HEVC 2160p 25fps clips play smoothly in all players (WMP, MPC-HC etc.) So do my HEVC videos from another NLE (which has other problems). I have tried many different settings. H265 to x264, H265 to NVENC AVC or NVENC HEVC. Variable bitrate as high as my camera NX1. All videos come out choppy, stroboscopic. All I want is to join my clips and make it smooth. You can watch it on my YouTube channel Anders Bixbe 160313 and 160316. Is there an easy solution to this? The free space on my SSD Windows 10 C disc is 150Gb..
in 184.108.40.206, I still have problems converting AVCHD to DNxHD (QuickTime):
If I specify 709 color levels in the Avid DNxHD codec settings, I get levels expanded, producing blacks well below 16 and whites expanded from 235 to 255 (de facto causing clipping of any existing superwhites in the source)
If I specify RGB color levels instead, I get apparently correct levels, but there is hard clipping of any existing superwhites at 235 (losing whatever useful info is present there)
I filmed and edited a carnival here. It's after editing 217minutes long.
I use DVD9 (double layer)
In settings I use 2pass encoding but do I set for example 8000 kbits for average video and hope that TAW5 is trying to reach that setting with the 2pass encoding? I know that this program is a very good encoder for minimal loss of quality.
Or use a online bitrate calculator which gaves me about 4750 kbits for average
When wanting to set a minimum bitrate, you have to choose Re-incode all as bellow, works for me every time on both DVD and Blu-ray projects when i do this.
The huge difference in output time that can be experienced depends on, if smart rendering is possible or not of the video files, where then everything then is just muxed (copied untouched). My own personal experience with the video files i have worked with, is that smart rendering for me was only possible with DVD-MPEG and VOB files for DVD projects and M2TS files for Blu-ray projects.
12 hours for creating a Blu-ray sounds normal to me, that's also the time it takes for me, when working with movies that was recorded from HDTV as TS files, which i want to turn in to Blu-ray's with a menu.
But is rare that i do this, because i normally only do such projects with Christmas movies in 1080i, where i then have 3 movies on each disc.
TAW5 creates bdmt_eng.xml files for your blu-ray's BDMV/META/DL subdirectory, if you enable it to do so. However, it writes the files, incorrectly. I have SONY BD players and they support thumbnails and disc titles, but TAW5's bdmt_eng.xml file has to have the xml corrected for this to function.
The title is displayed with the xml tag <di:name>PLACE TITLE HERE</di:name>, but TAW5 doesn't include the "di:" portion of the tag, therefore, making it useless. So, I simply add it using Windows Notepad, in UTF8 format.
It also doesn't write the correct path to the thumbnails. I haven't been able to find the proper code for this, though. It appears to write the location correctly, but perhaps using the incorrect code.
This is what it writes:
<?xml version="1.0" encoding="UTF-8"?><disclib xmlns="urn:BDA:bdmv;disclib"><di:discinfo xmlns:di="urn:BDA:bdmv;discinfo">
<di:title><name>AGENT CARTER • SEASON 1 [DISC 1]</name></di:title><di:description><di:thumbnail href="thumbnail_416x240.jpg" /><di:thumbnail href="thumbnail_640x360.jpg" /></di:description></di:discinfo></disclib>
The two images are in the same subdirectory as the xml file, so this appears to be correct. However, every other example of code I've seen adds:
I don't know xml, but the "./" seems to point to the same subdirectory as the xml file, anyway. Does anyone have any thoughts on things I might try to get the thumbnail code properly written? The title works find, and I've tried several different ways to write the path to the thumbnails. I've even put them in the root, BDMB, and META directories, as well as the DL directory. Notta. I can get thumbnails with commercial discs that reference an online location, but not when the thumbs are on the actual disc...at least not with the path that TAW5 writes.
Thanks you TMPEnc Team for correcting the '<di:name>' switch in TAW Authoring Works 5's bdmt_eng.xml file.
My SONY BD plays still won't display the images I include, like they do with commercial BD discs. Since I know my players DO display thumbnails when the image sources are pointed to online sources, there has to be something in the syntax of the image location created by TAW5 that is incorrect.
I *ALWAYS* want my output to go to the same folder as the input files but TMPGEnc always defaults to the last folder I outputted to. Is there a way to stop that behaviour and have it default to the source file folder instead?
First post for me guys. I am using TVMW 5 but would like to upgrade to 6 but I need to sort a problem before I spend my money. When loading an MKV video into a project it says No Audio Data. There is audio on the video so can anyone tell me how I can get it to pick up the audio stream. I don't want to be extracting the audio file in another programme and then adding it to this as surely it should be picking it up in TMVW5. Thanks
I guess these MKV's contain DTS audio, correct? That's not supported, unless you give it a little help, by using external direct show filters.
I have DTS and Dolby True HD support, because i let Haali Media Splitter and FFDSHOW (32-bit) take care of the rendering.
Does require to make a few changes of settings to be done first in both TVMW5 and FFDSHOW (32-bit) to get it working:
FFDSHOW Audio decoder configuration Codecs:
TrueHD change to libavcodec
DTS change to libdts
Uncompressed change to disabled
FFDSHOW Audio decoder configuration Mixer, put tick in box to activate Mixer and then:
Output speaker configuration: Change to same as input
FFDSHOW video decoder configuration Codecs:
VC-1 change to wmv9
Raw video change to all supported
Options => Preferences => File input plug-in
Here remove ticks from everything EXCEPT at FLV1 / FLV4 file reader and DirectShow file reader
MPEG => MPEG decoder, here change everything to Standard decoder
Click OK to exit, shut down TVMW5 and reload to make changes take effect.
What is mentioned above, can also be used in TAW5 to get that one to use Haali Media Splitter and FFDSHOW for rendering instead and get DTS support.
Adding to this, if you have elder video, who has been encoded with Dolby Digital, which also contains Dolby Pro Logic or Dolby Pro Logic II, then its possible to force this in to Dolby Digital 5.1
What you have to do in FFDSHOW's audio decoder configuration, is to put a tick at Dolby decoder.
Then TVMW5 will believe that the audio source is Dolby Digital 5.1
I used Tmpgenc for over 6 month now and never had a single crash so far. Everything ran smooth and absolutely perfect. A few weeks ago i decided to update to the newest version 220.127.116.11 and now i have alot of crashes. It's really bad...it get's to a point where editing isn't enjoyable anymore. It happens extremly often and i don't get why it happens. You can play your project 40 times and on the 41 replay you have the crash.
When the crash happens it's always the same thing. In the middle of a replay, the preview screen freezes but the project still runs further and the sound stays correct. When you hit the spacebar another time to stop and reposition yourself at the timeline, the whole thing freezes and the programm stays in an endless freeze without response. Only way to get out is to close and reopen the project.
It can also happen when i save or when i change filters on a videoclip. In between TMPGENC often tells me that there is a "problem with a pointer" whatever that means. I am just doing things like i always did....putting filters and effects on text or videos.
At first i thought that something was wrong with my computer, so i made a fresh windows 7 install. Didn't help....
I wanted to downgrade to the version i had before but unfortunately i don't know which version i got back then + the company seems to not provide downloads from older versions. Where can i find them? I would try out some sort of 6.1.x or even older ones, but i can't find them!
I also am experiencing system freezing/lockups since installing 18.104.22.168. I did not have this problem with any of the earlier versions and it only happens when encoding with either NvENC or cuda. I submitted a trouble request and the reply was to rename the UtilsIntelMedia.vme and UtilsCuda.vme so that they are not used. This negates the biggest reason I purchased this software(fast encoding using Nvidia).
I capture video to .TS files using a Colossus 2 card, then import into TMPGEnc as TS titles (or files "as is," doesn't matter). But I find that only the first 40 to 70 seconds import, where the whole video is about an hour. This happens in latest updates of TVMW6, TAW5, and TMSR4. Not sure if this was an issue before recent updates. Here is the Mediainfo description of one of the clips -- do we know if this is a bug, or should I try some different codec, if possible? These clips work fine in Cyberlink Power Director 13, but I am a longtime TMPGEnc user and would like to keep using these products. Thanks for any insights!
ID : 0 (0x0)
Complete name : D:\Colossus Recordings\20160220_0158.ts
Format : MPEG-TS
File size : 7.35 GiB
Duration : 1h 11mn
Overall bit rate mode : Variable
Overall bit rate : 14.7 Mbps
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L4
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Codec ID : 27
Duration : 1h 11mn
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Standard : Component
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Color range : Limited
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 2
Format profile : LC
Muxing mode : ADTS
Codec ID : 15
Duration : 1h 11mn
Bit rate mode : Variable
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Delay relative to video : -9ms
When I tell TAW5 to write a BD after authoring and then wait, it apparently does not finalize the disc (although it writes the data), and teh resulting disc cannot be played in any player or reader I have.
Author the project directly to your HDD instead, that could be to a folder called Video Editing or something like that.
Then you use ImgBurn instead to make the BD disc, where you choose: Write files/folders to disc.
Here you just drag and drop the BDMV & CERTIFICATE folder to the large window.
ImgBurn is so smart that it can see that you want to write a Blu-ray video disc and will then ask, if it should change the settings to write such a disc and give you the option to give the disc a name.
Directing you to a bit older version of ImgBurn, because the later version should be avoided, because it contains ad-ware, who can trigger various antivirus and anti-malware software, because of how the ad-ware is behaving. http://filehippo.com/download_imgburn/comments/12006/