Pegasys Products BBS

Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.


Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 478 / 982 ]   Next > >>
Classify Product Title User name Reply Last update
Question TE25 Still problems with synchronization video to voice frank 1 2003-05-21 01:23:01
Question TE25 Advanced Settings Rick Brown 4 2003-05-21 01:06:27
Question TE25 How to make a 690 MB Avi into a 2,35 GB Mpeg ?? Eugene 4 2003-05-21 06:06:59
Question TE25 Splitting MPEG's JHaigwood 6 2003-05-29 05:32:52
Question TE25 dvd2avi video file BigDaddy 1 2003-05-19 21:52:36
Question TE25 How to convert AVI to MPEG with 2.511? tssfka 4 2003-05-29 05:42:44
Question TDA1 DVD settings Steven 1 2004-04-24 06:40:51
Question TE25 Dr. Scott 2 2009-10-16 21:54:30
Question TE25 What is the difference between the models in The audio Channels The History 4 2003-05-20 10:13:28
Question TDA1 Chapters Divx 2 2003-05-19 18:11:27
Question TE25 Discolouration yamyam 4 2003-05-21 23:40:33
Bug report TDA1 Is there a 4GB limit ? Dr. Strange 4 2003-06-05 08:14:15

Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 478 / 982 ]   Next > >>
Question - TE25 - Still problems with synchronization video to voice No.36966
frank  2003-05-20 21:13:39 ( ID:3xk75co6d0g )   [ Delete / Reply with quotation ]

Here I am again. Using AVI video capture card I have captured a video segment in MPG format (MPEG1). I am now using the Tools/ MPEG option to edit the clip. I hae identified the beginning and end of the clip to be saved. When I play the saved clip the audio and video are out of synch.

I have tried to then go through the wizard and manipulate the sound using the add/ detract sound miliseconds but this seems to do no good. What should I be doing?


Minion  2003-05-21 01:23:01 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

You are Probably not doing anything wrong, The Merge & cut Isn"t the Most acurate editor there is and it oficially only supports the acurate editing of Files that were encoded with Tmpgenc, and it doesn"t acurately edit VBR Mpeg streams..You might best be off trying a Different Mpeg editor, if you are useing Mpeg1 then you can Probably find a freeware mpeg1 editor that will give you better results than tmpgenc"s editor..Another thing that sometimes can cause sync Problems in Captured Mpeg files after editing is that some Capture Software will add padding to the stream to compensate for dropped frames, so when editing/re-Muxing the Padding can get removed which causes the File to go out of sync, But I have only heard of this with PVR satalite cards...If you are Planning on Re-encodeing this File anyways you can edit out the Comercials by Useing the Cut editing feature in the "Source Range"......



Question - TE25 - Advanced Settings No.36961
Rick Brown  2003-05-19 23:53:59 ( ID:t4raxhpodyg )   [ Delete / Reply with quotation ]

There is no help available on the free version. I need to know which options to use under VIDEO ARRANGE METHOD and SOURCE ASPECT RATIO, on the Advanced tab in the Settings.


B_Racer  2003-05-20 10:15:30 ( ID:gxmkoa4dlnj )   [ Delete / Reply with quotation ]

Download the Plus-Version, and you have all the Help you need. :)
You have not to purchase the Plus-Version to use the Help-Function.


Minion  2003-05-20 20:13:08 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

The "Source Aspect Ratio" is NOT a Setting for YOU to Adjust, Tmpgenc adjusts this to the Correct aspect ratio automaticly, which is the aspect ratio of the file you have loaded into it..Usually "Full Screen Keep Aspect Ratio" is the Best setting in the "Video arange Method"....


B_Racer  2003-05-20 21:51:37 ( ID:dxp41zyyfu. )   [ Delete / Reply with quotation ]

@Minion
To be correct: It is the best setting, if you use TMPGEnc directly. But if you use a frameserving tool like AVISynth or VirtualDub, often Full Screen or Center may be the best Settings.

As an Example: If i'm Capturing from PAL VCR, i'm using the Crobbing-Function of VirtualDub to cut off the flickering lines at the Bottom of the Video (result: 704x560).
If i load this Video into TMPGEnc, it says, the Video has 1:1 VGA Aspect Ratio, which is incorrect. So Full Screen Keep Aspect Ratio is also incorrect. I have to use center to make it right.


Minion  2003-05-21 01:06:27 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

Well that is Why I said "Usually", I personally use "Center Custom size" and set the Image to the Correct aspect Ratio, But everyone Does something different But as a General Rule your File will usually look OK with this setting But you can usually get something better if you Experiment a Little But Poeple Don"t want Long Drawn out Answers then want what will work...



Question - TE25 - How to make a 690 MB Avi into a 2,35 GB Mpeg ?? No.36956
Eugene  2003-05-19 23:16:51 ( ID:wdh76z0urdm )   [ Delete / Reply with quotation ]

Hi idownloaded a film from internet. It is part 1. I also dowloaded part 2 and i want them together on a dvd. The size of the dvd is 4,7 GB so each film must be less then 2,35 GB. I have tried several settings, but i cannot get the job done.

I have use the templates and i also used VBR (0 to 3000 average= 2520) but i cannot get it right. Can u plaese help me with the correct settings.

Eugene
Holland


Eugene Again  2003-05-19 23:37:16 ( ID:wdh76z0urdm )   [ Delete / Reply with quotation ]

Mpeg-2 480x576 25fps CQ_VBR 50, layer-2 44100HZ 224kbps

doesn't make my 680 AVI file small enough. Suggestions ??


B_Racer  2003-05-20 10:21:00 ( ID:gxmkoa4dlnj )   [ Delete / Reply with quotation ]

Try 2pass-Encoding with the Bitrate, a good Bitrate-Calculator will give to you (like FitCD).

The Bitrate you need depents on the Play-lenght of the Video. For Example:
To fill a DVD with 2 Hours, 30 Minutes of Video, you can use 3900 kbps AVG for Video and 192 kbps for Audio (i suggest you to use AC3 2-Channel, can be produced by the Freeware BeSweet).

Possible 2pass-Settings:
6000 Max.
3900 AVG.
2000 Min.


Minion  2003-05-20 20:03:35 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

If you are Makeing a DVD "480+576" is Not the Correct Resolution and you would have a Hard time Getting a File with that Resolution on to a DVD, this is the Resolution for Pal SVCD..You would have to use either "352+576, 352+288, or 720+576" ,And the Fact that your AVI file is 680MB has No bearing on how big the Mpeg file will be, your AVI file can Be 100MB or 1000GB, what Matters is How Long the Movie is, A 2 hour Movie at an average Bitrate of about 5000kbs should fit on a Single 4.7gb DVD-R with Mpeg or AC3 audio at 224kbs, Probably about 4000kbs with Wav audio, a Bitrate calculator would help you determine what bitrate you should use for the length of your Movie and size of Medium...


gbagman37  2003-05-21 06:06:59 ( ID:gfs3fzybyzl )   [ Delete / Reply with quotation ]

So many things wrong with what you are trying to do. A Dvd has to have a sampling rate of 48000. and you should use a bitrate of 384 for audio. Use the wizard to automatically adjust your video bitrate to fit on a 4.7 GB DVD. You can usally go to 103 to 104 % capacity and still fit it as TMpenc doen'y do a very good job of this



Question - TE25 - Splitting MPEG's No.36949
JHaigwood  2003-05-19 20:43:43 ( ID:x7eid5jjvhf )   [ Delete / Reply with quotation ]

I just downloaded a ripped copy of "The Matrix" and I'm trying to get it so that I can put it on VCD. The original format was an avi so I downloaded a converter and now I've got a copy in mpeg that I have tested and works. Unfortunately the mpeg file is too big to put on a single disk so I need to split into 2.

Here's my problem. I used TMPGENC.exe and tried to see if I can get it to split. I set the exact split location I wanted and ran it. It should of then made a single cut of the mpeg for roughly 540MB's but when i opened up the cut. It was only 11MB's long and like 20 minutes into the beginning of the movie. No where close to where I had set it up to be cut. Now this is the second time this has happened with 2 different peices of software. Is this some sort of registration issue where i have to pay something in order to get a cut of the size i'm looking for or is something just not working right?

Also I'm curious as to how I'd convert the size of the mpeg down. Currently the dimmensions are around 640X4?? or something like that. If understood correctly, I need to cut it down to a 352x2?? to be able to be viewed right when played. How would I be able to do this?

Any help would be greatly appreciated. If possible, email me with the answer. JHaigwood@Hotmail.com. If not, I'll just keep checking back for your help. Thanks in advance.


Minion  2003-05-19 21:56:53 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

Well the Movie should be in Mpeg format and at 352+240/288-pal before you even tried to cut it in Half with Tmpgenc..You just take the Original AVI file and Load it into Tmpgenc and choose the Correct VCD template and encode it, then it should be at the correct resolution then you can use the "Merge & Cut" in the Mpeg Tools to cut the File in Half...


JHaigwood  2003-05-19 22:00:31 ( ID:x7eid5jjvhf )   [ Delete / Reply with quotation ]

I used WinMPG to convert the original AVI to VCD so maybe that was my problem. I'll try it using TMPENC this time I guess.


JHaigwood  2003-05-19 22:11:36 ( ID:x7eid5jjvhf )   [ Delete / Reply with quotation ]

Yeah, I've got the conversion running now. Geeze, when i converted it last night using WinMPG it took like 8 hours, this one only takes an hour and sets it in the needed format. Sweet! In case you hadn't noticed I've never done a VCD before. I'm gonna be making it with Nero. Did a test run using the new World of Warcraft trailer to see if I can actually make a VCD and have it be viewed on my DVD player. It works, unfortunately I couldn't figure out how to get the menu working. Hmm. Thanks for the help though.


JHaigwood  2003-05-19 22:43:17 ( ID:x7eid5jjvhf )   [ Delete / Reply with quotation ]

its not converting the whole avi file to mpeg now, could it be that the version of TMPGEnc isn't a full version and only limits to so many megs of a file. Or did i do something wrong when trying to convert to mpeg and its only doing the first 30 megs of the file and wont do any more? I'm so confused now. :(


Minion  2003-05-20 20:08:24 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

Well this Can Be From a Number of things..Did you get an error?? Did it Just Crash?? What type of AVI file is it?? Did you get it off of the net Cuz Many Downloaded Movies are Corrupted???If it is a Xvid File you might be better off useing the FFDShow Decoder to decode the file..As you Probably noticed there is a lot to makeing VCD/SVCD"s especially if something goes wrong which does quite often when dealing with Downloaded DivX or XviD files...


Kisoo Lim  2003-05-29 05:32:52 ( ID:rgy7xoobqxr )   [ Delete / Reply with quotation ]

First TMPGEnc has no limit on mpeg-1 encoding but limit on mpeg-2(svcd/dvd). So you may have file error. Also if the source avi file has ac3 audio, tmpgenc can't handle it. I recommend you to use AVI2SVCD software which extract audio from avi source and encode it to mp2 audio and automatically encode video with tmpgenc and mux it using bbmpeg.

I found matrix 2 mpg file(svcd) but it was pal format. So I demultiplexed and encoded video as ntsc format and muxed them, burned them to 2 svcd. Now it works file. SVCD is much better than vcd.

Good Luck!



Question - TE25 - dvd2avi video file No.36947
BigDaddy  2003-05-19 16:09:30 ( ID:2gmdp7rlm5f )   [ Delete / Reply with quotation ]

I use DVD decrypter to rib my movie, then dvd2avi. I then try and load the files into tmpeg but it wont recognize the video file. Audio works/is recognized fine. Any thoughts, suggestions? I have tried using both the newest and some of the older versions of tmpeg. I am running Windows XP home edition. Thanks.
BigDaddy


Minion  2003-05-19 21:52:36 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

Do you have the DVD2AVI.VFP VFAPI Plugin installed???You do this By copying the DVD2AVI.vfp file from the DVD2AVI Directory into the Tmpgenc directory then make sure it shows up in the VFAPI Plugins..



Question - TE25 - How to convert AVI to MPEG with 2.511? No.36942
tssfka  2003-05-19 08:40:38 ( ID:ra2vdkamytl )   [ Delete / Reply with quotation ]

I cannot convert the AVI movie files created by my Canon digi camera to MPEGs using v2.511. I get an error message saying that the file type is not supported. It will convert audio but not video. Any suggestions?

TYIA

tssfka


Minion  2003-05-19 21:47:00 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

Well What Format does your Camera Produce??? is it DV?? if it is DV you will need a DV Codec installed, and if it is DV what type is it ,Type 1 or Type 2??


paulking  2003-05-21 18:45:52 ( ID:8yfrh0k0y/a )   [ Delete / Reply with quotation ]

I'm having the same issues with my Polaroid Digital Camera. How do you find out what format the camera produces. ie, DV1, DV2 etc.


Minion  2003-05-23 08:46:10 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

Use something like "GSpot" it will tell you everything about your AVI file But I"m sure it is Type 1 DV as Most use Type 1 DV these days...Just download a Couple DV codecs and see if that helps...


Kisoo Lim  2003-05-29 05:42:44 ( ID:rgy7xoobqxr )   [ Delete / Reply with quotation ]

Better try to raise the priority of Directshow multimedia in Environmenal setting VFAPI Plugin. I have sony pcr-7 6m digial camcorder and normally I capture it to 25mbps dv-avi using ieee-1394 card.



Question - TDA1 - DVD settings No.48577
Steven  2003-05-19 02:43:33 ( ID:y9r74tb6bga )   [ Delete / Reply with quotation ]

Can anyone tell me what settings I should set the TmpgEnc DVD format for? I have downloaded divx Avi riped movies and what to burn them to DVD.

Thanks


LordBiggness  2004-04-24 06:40:51 ( ID:vdmkwxbf9zo )   [ Delete / Reply with quotation ]

I too am able to run DVD Author, until I get to the DVD Write Tool....that's when I get "Drive Not Ready" message. I have a Sony Vaio with a Pioneer DVD-RW DVR 104 DVD burner. I too download movies and it was recommended to use this program for DVD burning....am I doing something wrong or is it my DVD burner itself?
PLease help, I'm extremely new at this and Extremely enthused with using more of the capabilities of my PC....

~ LordBiggness ~



Question - TE25 - Dr. No.36939
Scott  2003-05-18 22:56:29 ( ID:d.s4fbg4bfl )   [ Delete / Reply with quotation ]

Ok, how exactly does normalize work? does it compare all the files I am encoding and average them? how would I make a mass amount of files all the same? just put set it the same # all the time? also.. what happens if you change the volume settings on your computer in between normalizes? would that change what is "normal"?


Thanks


Minion  2003-05-19 04:06:31 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

Normalize Just Averages out the audio for the File that is loaded into it, The Volume settings on your Computer have nothing to do with the Audio levels inside the Audio File...


lwc  2009-10-16 21:54:30 ( ID:mfoh699waq2 )   [ Delete / Reply with quotation ]

Let's say I have a clip that's too quiet. What do I do with normalize once I'm inside Audio Edit? It goes between 0%-100% but what does it mean?

Likewise for a clip that's too loud.



Question - TE25 - What is the difference between the models in The audio Channels No.36934
The History  2003-05-18 19:59:22 ( ID:l5iudigv3eh )   [ Delete / Reply with quotation ]

I have found that there are three chioces in the audio channel in the setting.
Stereo, joint-stereo and dual-channel.
I'm converting Dvd to vcd but what is the difference between stereo and joint-stereo?
I have read something related to this issue but the one who answered just said it depends on what you wnat????
please I need to know what is the difference between them?


Minion  2003-05-18 22:15:20 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

Well sterio is the Right chanell comeing out the Right speaker and the Left chanell comeing out the Left speaker, Joint sterio is Both the Left and Right Chanells being Played out of each Speaker, and Dual Chanell is one audio track Being Played out of one speaker and a Seperate audio track being played out the other so when Panning to the Right you can get a different audio track as when you pan to the Left..Just stick With Sterio for most Movies...


B_Racer  2003-05-19 12:14:17 ( ID:gxmkoa4dlnj )   [ Delete / Reply with quotation ]

@Minion

Your explanation of Joint Stereo isn't right. What you descriped is Mono, not Stero or Joint Stereo.
Joint Stereo is a methode to save bitrate. It mixes right and left channel only for compression. If the right Channel can be compressed higher than the left, Joint Stereo use the "extraspace" for Data from the left channel (an vice versa). A Decompressed Joint Stereo-File will be in Stereo.


Minion  2003-05-19 21:49:58 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

I"m sure Your Probably Correct,But how can you save bitrate when doing CBR audio encodeing???


B_Racer  2003-05-20 10:13:28 ( ID:gxmkoa4dlnj )   [ Delete / Reply with quotation ]

Hehe, good Question. Joint Stereo is designed for low Bitrates. It does not realy save Bitrate, but does a better use of the given Bitrate.

Work's like this:
Encoder: Hey, there's a part in the left Channel that can be encodet with only 128 kbps instead of 192 kbps, and hey, there's also a Part in the right channel that need's more than 192 kbps, so why i don't use the Space in the left for the overhead of the right channel?

OK, it's not an exact description, but the best i can write in english... ;)



Question - TDA1 - Chapters No.48574
Divx  2003-05-18 13:03:47 ( ID:y9r74tb6bga )   [ Delete / Reply with quotation ]

Hi I've just started using this product and when I creat the chapters in the program and then burn it using Nero. I dont see any chapters or menu's anyone one have any thoughts. I use the standard settings too in creating a DVD in TmpgEnc then use the DVD program. And default setting in Nero.

Thanks Steven


Borgster  2003-05-19 09:41:15 ( ID:5uhceskba7w )   [ Delete / Reply with quotation ]

Hi Steven,

Your Problem is NERO, try the setting from www.dvdrhelp.com > HowTo's > Authoring.> "Burn with Nero UDF 1.02"

Good luck,

Borgster.


Baz  2003-05-19 18:11:27 ( ID:ayfjj.q1jxk )   [ Delete / Reply with quotation ]

Similar problem here.
My first DVD player arrived today and I played my first DVD which I authored with TMPGEnc DVD Author. I set up chapter points but used no menu as there is only one video and there seems little point in making it more complicated to play than necessary. I read the players manual on changing chapters but it didn't appear to work. I was told on another forum that you don't need a menu for the player to recognise chapters. Maybe I just haven't sussed out the player yet, or the chapters weren't included.



Question - TE25 - Discolouration No.36929
yamyam  2003-05-18 10:42:14 ( ID:v7ftpjfzipj )   [ Delete / Reply with quotation ]

Im using the latest version (2.511) of tmpg but ive noticed that every now & again in an encoded film i get discolouration in dark areas, i encoded harry potter 2 as the dvd film is (no clippin, no resize) just to bring the size down to a single layered disc.

Any ideas on this problem ?


yamyam  2003-05-18 10:44:54 ( ID:v7ftpjfzipj )   [ Delete / Reply with quotation ]

by the way i am framserving from dvd2avi.


Minion  2003-05-18 22:10:43 ( ID:w8yn5mktf8w )   [ Delete / Reply with quotation ]

There are Other ways to Make a Retail DVD Fit on a Single DVD-R while retaining all of the Menu"s and chapters, Programs Like "DVD2One" and "DVD-Shrink" can do it very well and DVD2One can do it very Fast Like in Just a Few Minutes..But if you are getting Bad Discoloration then that can be caused By Haveing a Bad codec installed on your System ,The codec is called "Angel Potion" if you have it you should delete it as it causes Purple and Pink discoloration on encoded files, But it really shouldn"t have a Problem useing D2V files, Make sure in DVD2AVI you have the colorspace settings set to "Yuv" and to "TV Scale"....


B_Racer  2003-05-19 12:18:39 ( ID:gxmkoa4dlnj )   [ Delete / Reply with quotation ]

@yamyam
Minion is right, but there's an other possible reason for lightened dark areas if you are using DVD2AVI. What settings did you use? RGB-Colorspace or YUV? TV-Scale or PC-Scale? That's important!


yamyam  2003-05-21 23:40:33 ( ID:v7ftpjfzipj )   [ Delete / Reply with quotation ]

I was using YUV - PC Scale all the time but at the moment im encoding the movie again with YUV - TV Scale to see if this makes any difference, never used the RGB setting. Hoping TV Scale Will cure my problem.



Bug report - TDA1 - Is there a 4GB limit ? No.48569
Dr. Strange  2003-05-17 21:09:21 ( ID:hvbecdq7euo )   [ Delete / Reply with quotation ]

I recognized problems to insert a source mpeg which is greater than 4 GB. Is there a limitation? It should be possible to import a 4,4 GB movie when the DVD-disc has 4,7Gb capacity!


B_Racer  2003-05-17 22:00:56 ( ID:jrnhxvjhlek )   [ Delete / Reply with quotation ]

Maximum File-Size for DVD is EXACT 4.37 GByte (4.700.000.000 Bytes, (OK, a couple of Bytes more, but thats not important in this case)).


Dr. Strange  2003-05-18 10:04:50 ( ID:mjsenf9mkej )   [ Delete / Reply with quotation ]

yes, that´s right. But it should be possible to import a file which is larger than this. You can cut commercial advertising from the beginning, from the end and maybe in the middle. And my recordings are often 15 min. longer then the duration of the movie. I want to cut the movie in TDA so that it is not larger than 4,37 GB. In fact, I can even not import a 4,1 GB movie.

Is there anybody else who has problems with files larger than 4GB?

By the way: Of course I have XP and NTFS. It really seems to be a limitation of TDA.


Flepp  2003-05-18 11:08:16 ( ID:kqclpgdjvq6 )   [ Delete / Reply with quotation ]

I had no problems importing m2v files of 4.8 Gb.& more .Then cut out commercials and unwanted scenes.I always use demuxed audio & video files
for importing


Giba  2003-06-05 08:14:15 ( ID:294hlirfjqo )   [ Delete / Reply with quotation ]

Had no problem importing 5.2 Gb of m2v (generated by TMPGenc), then cut out bits and peaces until it would fit to 4.3 Gb (the label on the DVD says it is a 4.7 Gb which is a joke). My pc is P4, 2Ghz, with XP pro, 2 IDE HardDisks and one 200 Gb Firewire.



Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 478 / 982 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.