TMPGEnc Video Mastering Works 6 BBS

Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.


TMPGEnc Video Mastering Works 6 BBS [ Sorted by thread creation date ] [ 1 / 8 ]   Next > >>
Classify Title User name Reply Last update
Question Crop and add borders RDS11 1 2017-11-10 14:33:22
Question How to MPEG-2 Program - MPEG-4 AVC Taner Güngör 1 2017-10-10 17:11:18
Question utilize all cores meshal 1 2017-10-10 14:59:20
Bug report Windows 7 system crash John Nicolettos 1 2017-10-10 14:47:16
Question UI reacting very slowly Otto 2 2017-09-16 13:46:20
Question INSTALLING PROBLEM JIN SHINE CHEN 1 2017-08-16 13:05:21
Question Automatic Bit Rate not accurate am_dew 1 2017-07-27 20:47:44
Question Make frame rate 25fps as default anthonyh 2 2017-07-27 19:56:14
Question Import DNxHD mxf sergium 0 2017-07-21 17:21:57
Question Rotate Filter and Cut/Edit Douglas Bruce 1 2017-07-27 13:00:39
Request 'Copy' Audio and/or Video bobthegoat2001 0 2017-06-23 01:35:02
Question Keep last frame of video Otto 6 2017-06-24 15:23:09

TMPGEnc Video Mastering Works 6 BBS [ Sorted by thread creation date ] [ 1 / 8 ]   Next > >>
Question - Crop and add borders No.70898
RDS11  2017-11-09 03:42:55 ( ID:4097ljnujam )   [ Delete / Reply with quotation ]

Hello,
I have a 1280X720 video that I want to change as follow : crop 16 pixels at the top and add 16 pixels of black at the bottom. I can't do that only with the 'crop' filter, because the mask option can only be added on the portion that is being cropped.

Basically, for those familiar with Avisynth, I want to do something like this :
Crop (0,16,0,0)
Addborders (0,0,0,16)

Any idea how I can achieve this with MW6 ?

Thank you !


tkrave  2017-11-10 14:33:22 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

So basically, you're just moving the entire video up 16 pixels?

If so, you can do it in Timeline mode.
Once in timeline editing mode, select your clip and then in the properties tab on the right side of the screen, type in -16 in the "top" field. This will move the video up, cutting off 16 pixels from the top and showing a black background at the bottom.



Question - How to MPEG-2 Program - MPEG-4 AVC No.70868
Taner Güngör  Mail /  )  2017-10-10 16:50:49 ( ID:cizle2we1p6 )   [ Delete / Reply with quotation ]

Hi, I can do it " Output Stream Type: MPEG-2 Program (VBR) - Stream Format: MPEG-4 AVC" TMPGEnc Video Mastering Works 5. Because this is set Adobe Encore don't transcode.

But I can not make this setting TMPGEnc Video Mastering Works 6.
how can i do this setting TMPGEnc Video Mastering Works 6?


Taner Güngör  2017-10-10 17:11:18 ( ID:cizle2we1p6 )   [ Delete / Reply with quotation ]

>Hi, I can do it " Output Stream Type: MPEG-2 Program (VBR) - Stream Format: MPEG-4 AVC" TMPGEnc Video Mastering Works 5. Because this is set Adobe Encore don't transcode.
>
>But I can not make this setting TMPGEnc Video Mastering Works 6.
>how can i do this setting TMPGEnc Video Mastering Works 6?

http://www.imagebam.com/image/8cff42623159673



Question - utilize all cores No.70864
meshal  Mail / Home )  2017-09-30 08:33:46 ( ID:j.gyaemtqtw )   [ Delete / Reply with quotation ]

hi there..
i got this problem lately with my new system.. the program can't utilize all core while encoding 2 passes x264..
the first pass use all the cores but the second pass use only 1 core :(
this problem happen from time to time.. sometime use all core and other only 1.
i tried 6.2.5.31 and now 6.2.5.32 same problem.
spec:

i9 7900x
asus rampage apex x299
32gb memory 4x8
nvidia 1050
960 pro nvme hdd
all driver are up-to date


Ades  2017-10-10 14:59:20 ( ID:nrp09m2aqdn )   [ Delete / Reply with quotation ]

hi, I think this is related your source file, what is it?
If for ex. it is an AVI file, probably the codec used does not use all cores to decode.
You may need to check in Options > Preferences > the Multithread settings, as well as check if the CPU cores are recognized in CPU/GPU settings.
cheers



Bug report - Windows 7 system crash No.70853
John Nicolettos  Mail /  )  2017-09-14 02:47:49 ( ID:gwzmwlxdqzc )   [ Delete / Reply with quotation ]

I have a licensed copy of TMPGEnc 4.0 XPress (EN) and wanted to try Mastering Works 6. I downloaded a trial version which worked fine until I tried using the Timeline mode. That action locked up my computer and I had to do a hardware shutdown which corrupted my OS(Window 7 -64 bit).

I was able to recover my OS, but, when I tried to uninstall the program the uninstaller ran for over 5 minutes without stopping. I just got a busy mouse icon. I'm concerned that whatever the program did to my system is still a problem. Any advise on how to get this program off my computer, without using "Windows Uninstall" would be greatly appreciated.

Also, would be interested if anyone else had this problem and if so, what did you do to fix it.

Thanks


Ades  2017-10-10 14:47:16 ( ID:nrp09m2aqdn )   [ Delete / Reply with quotation ]

Never, heard about such behavior,
I recommend you to check your hardware, you can try to uninstall using a freeware such as Revo uninstaller:
http://www.revouninstaller.com/revo_uninstaller_free_download.html
delete including the registry entries.
cheers,



Question - UI reacting very slowly No.70842
Otto  Mail /  )  2017-08-29 16:17:42 ( ID:k26qnzxicrr )   [ Delete / Reply with quotation ]

Hi,
first of all: I am very happy with TMPGEnc 6. I like working with it and the usability of the software i think is awesome. Also Hurray! for the Batch-Rendering-Feature.

However since i first started using TMPGEnc i have the problem, that the UI is reacting very slowly on changes.

For example: When i insert a clip into the timeline i have to wait 5 seconds. When i want to set the current play-marker somewhere on the clip it takes another 5-8 seconds until the preview-window updates. Same when i try to split a clip: At least 10 seconds until something is happening.

The other major thing is playback in preview-window: While the sound is on time, the preview-window is never keeping up. It mostly stops displaying anything at all, only a freeze frame. When i hit the stop-button the preview-image updates after 5 seconds.

Does anyone have a suggestion how this can be eliminated?
My computer-specifications are: Intel Core i7-2600K - 3,40 GHz, 24 GB RAM, 64-Bit Windows 7, GeForce GTX 1070

I have already set the option "Pre-Rendering - Save Folder" to RAM so it's not caching on the harddisk, but no change.

Mostly i am rendering videos 1920x1080 - 60 FPS and 2440x1440 - 60 FPS.

I am open for any suggestion. It is so hard to work with the software, when you have to wait every few seconds for the ui-update.

Best regards,
Otto


Otto  2017-09-03 03:29:10 ( ID:k26qnzxicrr )   [ Delete / Reply with quotation ]

Just to clarify: If no one has a solution i am also very happy to hear from your user-experience. Do you have the same problem when working with clips? Does your TMPGenc react immediately when changing properties or moving clips? Any help or review would be appreciated, so i may be able to narrow the problem down.

Best regards,
Otto


tkrave  2017-09-16 13:46:20 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

I only get that kind of slow down when I work with videos higher than 1080p, so maybe your system just can't handle it. I mostly work with 720p and 1080i footage and it works great with that.

I'm on Windows 10, Core i7, 16 GB RAM.



Question - INSTALLING PROBLEM No.70830
JIN SHINE CHEN  2017-08-07 19:20:13 ( ID:rwahj7hvzxm )   [ Delete / Reply with quotation ]

My new notebook screen resolution is 1920x1080HD,but why installing shows"The software cannon start because this computer does not have the minimum required screen resolution 1280x768(at DPI 100%)"?


tkrave  2017-08-16 13:05:21 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

In your notebook's Display Settings, is the Scale and Layout set to 100%?

If it's a different percentage, you'll need to change it.



Question - Automatic Bit Rate not accurate No.70820
am_dew  2017-07-26 22:26:52 ( ID:hlong.mvpdk )   [ Delete / Reply with quotation ]

The automatic bit rate setting does not seem to work properly because if I have a source that is, for example, a constant 25 Mbps, the auto bit rate setting sets itself to 12.4. It also overshoots the maximum bit rate by quite a bit and sets it to 49.6 Mbps. The format I am seeing this behavior on is MP4 H.264/AVC and the source video is the same. In other words, I output something using the MP4 H264.AVC format and then used that as my source.

Any ideas why this is happening? Thanks.


am_dew  2017-07-27 20:47:44 ( ID:hlong.mvpdk )   [ Delete / Reply with quotation ]

I asked Support the same question and this is their response, which does not seem to make any sense to me.

"It checks the resolution of the source file and based on that it is
decided.
Is not about making the source and the output to the same bitrate, this
function is to adjust the best possible bitrate for output.
So in other words it is a function for not make the bitrate too low.

If you want to output in the same bitrate you have to set it manually in
the Bitrate settings without using the automatic function."

If the source is 25 Mbps, the setting the output to 12.4 would result in quality loss I would assume, right? I know that is not a given, but it seems reasonable.

Comments?



Question - Make frame rate 25fps as default No.70816
anthonyh  Mail /  )  2017-07-22 01:13:37 ( ID:yxdhn2/licf )   [ Delete / Reply with quotation ]

I was wondering if it`s possible to make 25fps the default for encoding etc as the majority of our encodes are to this frame rate. It`s a bit of a hassle to have to change it from 30fps every time we do a new encode. Perhaps a setting in preferences to set the default framerate.
thanks


tkrave  2017-07-27 13:18:30 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

If you're always encoding to the same format, then I would make a custom output template.

After you make your template, the next time you go to the format stage it should select your custom template by default.


anthonyh  2017-07-27 19:56:14 ( ID:yxdhn2/licf )   [ Delete / Reply with quotation ]

It`s the import frame rate that I want to set rather than the output. It defaults to 30 and we rarely ever use that. thanks for the response though.



Question - Import DNxHD mxf No.70815
sergium  Mail /  )  2017-07-21 17:21:57 ( ID:utfgm.feegw )   [ Delete / Reply with quotation ]

I try to import file with *.mxf extension and get a message that file has not video. File created in Adobe Premiere Pro СС2017 with codec Avid DNxHD 120 1920x1080 50i. Other mxf files with other codecs is importing normally



Question - Rotate Filter and Cut/Edit No.70813
Douglas Bruce  Mail / Home )  2017-07-20 08:56:55 ( ID:ds0vvem9dil )   [ Delete / Reply with quotation ]

I have a lot of clips that are upside down.
I use the "Rotate" filter to rotate 180 degrees.
Then I want to cut/edit the rotated clips, but when I go to Cut/Edit, the clips are inverted again.
Can I make the filter stick when I go to cut/edit?

The workaround is to render out the rotated clips and then re-import them to cut/edit.
But I wonder if I can do both the rotation and cut/edit in the same session?
Regards
Douglas


tkrave  2017-07-27 13:00:39 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

I think the easiest way is to use another program to change the rotation setting in the video's metadata before you bring it into TVMW6.
Try out movierotator.com for a program that can change the setting without having to re-encode.



Request - 'Copy' Audio and/or Video No.70801
bobthegoat2001  Mail /  )  2017-06-23 01:35:02 ( ID:ri07.fpz166 )   [ Delete / Reply with quotation ]

A feature that I have been wanting for awhile now is a feature to just 'Copy' the audio from the original video. Audio is normally so small, that re-encoding it is unnecessary. I believe it's better to just copy the original audio so that their isn't any quality loss when converting it. There are some codecs not supported by TMPGenc VMW 6 also, for example DTS-HD Master Audio 7.1 channel.



Question - Keep last frame of video No.70794
Otto  Mail /  )  2017-06-20 22:39:34 ( ID:y/wqiqwptyj )   [ Delete / Reply with quotation ]

Hello,
is it possible to freeze frames for a period amount of time inside a single clip?

I have an audio-recording, which is a longer then the original video-clip. So i would like to freeze (stretch) certain parts inside the video-clip until the audio arrives at the specific marker and then continue with the regular video.

Thank you and best regards.


tkrave  2017-06-21 16:06:18 ( ID:nrp09m2aqdn )   [ Delete / Reply with quotation ]

Is the audio a separate file from the video? If not, you'll have to demux them into separate files.

I would then use the timeline mode and put the audio on one layer and the video on another.
Then, you can use the clip editor to create a separate clip of the frame(s) you want to stretch.
Back in the timeline, you can then lengthen that clip to the appropriate time.


Otto  Mail /  )  2017-06-21 20:54:43 ( ID:y/wqiqwptyj )   [ Delete / Reply with quotation ]

Yes tkrave, the audio is separate from the video.

Thank you for your suggestion. I already tried that, but the effort for creating the exact frame is way to much when i have to do this around 50 times per video.

An easy way would be to just cut the video where you want to have the still-image and the stretch the cut clip to the right for the desired period of time. Unfortunately TMPGEnc continues with the original video-footage when doing that.


tkrave  2017-06-22 12:41:04 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

If it is a single frame, turn the frame into an image and import that image as a clip. Then you can extend it to any length and it will still be the same image.


Otto  2017-06-23 22:31:46 ( ID:kuz9.f2vrcw )   [ Delete / Reply with quotation ]

Thank you tkrave for your ongoing writing. Do you have a hint how i can turn the last frame of a cutted clip into a single image?


tkrave  2017-06-24 13:37:40 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

In the clip editor, navigate to your final frame and then you press CTRL+F or right-click on the image and choose to save it as an image.


Otto  2017-06-24 15:23:09 ( ID:kuz9.f2vrcw )   [ Delete / Reply with quotation ]

tkrave you are awesome. This is exactly what i was searching for!
Now i can fill up the missing gap with a continuous picture.

Thank you very much for your help.



TMPGEnc Video Mastering Works 6 BBS [ Sorted by thread creation date ] [ 1 / 8 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.