Pegasys Products BBS

Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.


Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 13 / 982 ]   Next > >>
Classify Product Title User name Reply Last update
Question TAW6 Custom menu links for special features page Good Knight 0 2020-03-25 03:14:03
Question TVMW7 Commercial Candidates Detector DennisH 0 2020-03-18 03:52:39
Question TAW6 mp4 file are not managed properly mgion 2 2021-01-11 04:09:50
Question TVMW7 Having trouble with audio stream Snoopy329 3 2020-08-31 12:04:39
Question TVMW7 Create ISO crg223 1 2020-02-20 15:30:19
Question TAW6 Menu Audio Length Arthur.S 1 2022-07-22 15:32:37
Bug report TVMW7 Wrong Start Time in Source in Timelapse/Speed effect Matthias N. 2 2020-02-10 22:36:53
Question TAW6 Extra page menu Maury 1 2020-02-01 08:57:28
Question TVMW7 Volume lower than source Charlie 0 2019-12-15 01:18:20
Question TAW6 CREATING ADDITIONAL TITLE PAGE LINK methxtra 1 2019-11-27 15:45:39
Question TVMW7 A bit annoying Dennis Hartley 0 2020-09-09 14:36:38
Bug report TMSR5 HEVC MKV editin is unusable slow Florian Gamper 6 2020-08-29 23:41:56

Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 13 / 982 ]   Next > >>
Question - TAW6 - Custom menu links for special features page No.71448
Good Knight  2020-03-25 03:14:03 ( ID:5opklhuintn )   [ Delete / Reply with quotation ]

I'm producing a DVD for a film. It consists of:

- The Film in both stereo and 5.1
- Film subtitles
- Directors commentary of film
- The trailer
- Behind the scenes video

I have made a separate special features menu with the trailer and the behind the scenes video on it. I would like to have a link to the directors commentary on that same Special Features page. But because it is an audio track of the main film, the only way I seem to be able to access it is in the audio setup page automatically generated for the film (track 1)

Is it possible to do this in this software? It seems like it shouldn't be a problem just to add a custom link but the interface feels very locked down.



Question - TVMW7 - Commercial Candidates Detector No.71444
DennisH  2020-03-18 03:52:39 ( ID:anadtyd6gmr )   [ Delete / Reply with quotation ]

Does anyone know where this stores the results?
I use this a lot and recently went to re-edit a video from some time ago. When I ran the Detector it finished immediately showing results. It must have got these from when I last edited the video, some weeks ago. I must have accumulated a large collection of these old Detections somewhere. I'd like to delete them.



Question - TAW6 - mp4 file are not managed properly No.71443
mgion  2020-03-17 03:43:30 ( ID:nq7dfjctg3g )   [ Delete / Reply with quotation ]

To whom it may concerns.

I usually process my clips with Premiere Pro (output as MPEG2-DVD) and import them in TMPGEnc Authoring Works 6 as m2v files, which work perfectly
Recently I have processed HD clips on premiere pro (output as H.264) and I have import them in TMPGEnc Authoring Works 6 as mp4 files . However, the video jerks both when playing the timeline track and in the simulation mode.
I thank you in advance for your help

Massimo Gion


Z440  2020-03-23 02:44:58 ( ID:zxhjy9f5iur )   [ Delete / Reply with quotation ]

Export from Premiere Pro using the H.264 Blu-ray preset. Exporting just as .mp4 will give you a non-compliant file and will cause issues.


Michael J Stehly  2021-01-11 04:09:50 ( ID:33szrzkcudo )   [ Delete / Reply with quotation ]

If I create an H.264 Blu-ray video in Adobe Premiere, will Authoring Works 6 reincode the video?



Question - TVMW7 - Having trouble with audio stream No.71432
Snoopy329  2020-02-19 07:08:15 ( ID:jhjdqv.0acr )   [ Delete / Reply with quotation ]

So, I am importing a video file (in MKV format) into Works 7 which has 2 audio tracks. For some reason, I am getting 1 audio track imported. I am new to this so maybe I am missing something. Any suggestions?


DennisH  2020-03-18 03:55:52 ( ID:anadtyd6gmr )   [ Delete / Reply with quotation ]

When you've loaded the video file go into the 'Clip Properties'. Here you can select the other audio stream.


Nrgte  2020-06-29 23:04:22 ( ID:7q.axe2ovzm )   [ Delete / Reply with quotation ]

I cannot see this property, is this a new thing? I'm still on TVMW6.


Bullhead  2020-07-09 07:46:06 ( ID:ds5wrg5sn/a )   [ Delete / Reply with quotation ]

…I have same problem, My opinion – TVMW7 support only one audio track:-(

@DennisH – in “Clip Properties” is possibility select only ONE track, no more track at the same time



Question - TVMW7 - Create ISO No.71431
crg223  2020-02-16 14:24:43 ( ID:jnpwrp/pdr6 )   [ Delete / Reply with quotation ]

Which product do I need in order to create an ISO that I can then use with imgburn to burn DVDs and blu rays? I downloaded the trial version of Video Mastering Works 7, but that looks more like an editing program, like Adobe Premiere. What I need is not an Adobe Premiere but an Adobe Encore, in effect. Does this or any other tmpgenc product create ISOs?


tkrave  2020-02-20 15:30:19 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

Check out TMPGEnc Authoring Works 6. It's their DVD/Blu-ray authoring software. You can output a DVD or Blu-ray project and then convert into an ISO with the included tools.



Question - TAW6 - Menu Audio Length No.71429
Arthur.S  2020-02-12 04:39:05 ( ID:xqgrsig8zma )   [ Delete / Reply with quotation ]

I normally use motion menus, and the background audio length is in 'Global Settings'. This time using a static menu I can't find where to adjust the background audio length. On simulation the menu stops before the audio is finished. The only way I've found myself is to create a motion menu...even though there isn't one! Any other suggestions guys?


tkrave  2020-02-15 07:22:47 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

Once you add audio, it becomes a motion menu and you must change the audio duration in the motion menu settings. If you go to the Motion Menu settings, you'll see that the option for "Still Picture and Background Audio" is selected.



Bug report - TVMW7 - Wrong Start Time in Source in Timelapse/Speed effect No.71420
Matthias N.  2020-01-29 19:09:34 ( ID:bxxfqvauell )   [ Delete / Reply with quotation ]

Hello,

I think I have encountered a bug in VMW7 or at least a very strange behaviour regarding the Timelapse and Speed effect.

In the clip properties you can see the Start Time, End Time, Duration and Start Time in Source. Of course if you accelerate the clip then the Duration and End Time changes as the clip gets shorter. But it seems that the source is also calculated shorter respectively to the acceleration, so if you accelerate the clip by factor 5, the Start Time in Source needs to be divided by 5 to start at the correct frame. This can result in the effect not working at all.

Here is an example/steps to reproduce:
Scenario: 10 minute clip, Start Time and Start Time in Source 0:00, accelerated by factor 5, this clip would be 2 minutes long after accelerating the whole clip.
But I only want to accelerate the last 2 minutes, I make a cut at 8 minutes, resulting in 2 clips, the first one with Start Time in Source at 0:00 the second one with start time in source 8:00.
Double click the second clip and activate the Speed or Timelapse effect with speed 500% or 5x.
Now you see that the effect shows only the first frame of the video and preview is disabled, current frame is -1 etc. That is because now as start time 1:36 is expected (8 minutes/5), but Start Time in Source is still at 8:00, but 8:00 doesn't exist as the source runtime is also calculated to 2 minutes due to the acceleration. VMW7 doesn't even notify what is the problem...

For me this behavior is extremely strange as Start Time in Source should always reference to the original and not manipulated file... Even if the bahavior is desired, VMW7 should calculate the new Start Time in Source by itself if you activate one of the effects, it is very unclear why the start frame of the clip is a different one after adding one of the effects or why it doesn't work at all. If it is not even a bug.


tkrave  2020-02-04 05:17:39 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

How are you splitting the clip?

I was only able to recreate your example by splitting the clip from the right-click menu in Timeline Mode.

If I double click the clip (before splitting) and split the clip from the clip editor window, I don't get the same results. Using this method, I was able to apply the Timelapse filter to the second clip and it would start where it was supposed to and its duration would properly shorten.

Start Time in Source is more of a setting than a property you shouldn't touch, if that makes any sense. You can change the start time of the clip so it starts later/earlier if you want, so 0:00:00 just refers to the start of the clip. Think of the Properties tab in Timeline Mode as the current settings of the clip; it's different than the Clip Properties in the Clip Editor window which lists the source's properties.


Matthias N.  2020-02-10 22:36:53 ( ID:bxxfqvauell )   [ Delete / Reply with quotation ]

Yes you are right, I split on time line with right click, because that is the most convinient way for me. But I try it out in clip editor window. Thank you!



Question - TAW6 - Extra page menu No.71419
Maury  2020-01-28 07:10:59 ( ID:yaijflpzn12 )   [ Delete / Reply with quotation ]

Hi. How can I add an"EXTRA" button on main menu linked to extras contents ?
Thanx


tkrave  2020-02-01 08:57:28 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

You can use a Note page to add text and pictures. For extra video, it would have to be another track menu. You can choose text buttons if you use the Custom Menu option and you can then use any font and text as your buttons.



Question - TVMW7 - Volume lower than source No.71395
Charlie  2019-12-15 01:18:20 ( ID:ycbxv1gj7rn )   [ Delete / Reply with quotation ]

Hi,

I'm using the last version of TMPGEnc VMW7 and I'm experiencing low sound level in my x264 et x265 for every output file. I must use volume ajustment filter to 150% to get the right level (TV 1080i TS file in input)
I use Handrake too and i'm not experiencing the same problem.
Has someone the same problem ?

Thanks



Question - TAW6 - CREATING ADDITIONAL TITLE PAGE LINK No.71388
methxtra  2019-11-10 07:01:25 ( ID:iolex/l3jvj )   [ Delete / Reply with quotation ]

I need to add another link to my TITLE PAGE as to link to extras page etc can this be done in TAW6

Thanks


tkrave  2019-11-27 15:45:39 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

If you create a note page for the top/track page that has a title page, it will automatically create a link to the note page on your title page.



Question - TVMW7 - A bit annoying No.71385
Dennis Hartley  2019-11-01 04:48:40 ( ID:7.7nvfkobgc )   [ Delete / Reply with quotation ]

VMW7 is a great piece of software however a niggle I have is when dropping a number of .ts files into the editor. Each one has to have the "Finish" button clicked. I don't want to do that x number of times! If I drop a load of .mpg or .mp4 files they just get added, no extra button clicking. Please let me do that for transport stream files.



Bug report - TMSR5 - HEVC MKV editin is unusable slow No.71384
Florian Gamper  2019-10-23 21:48:08 ( ID:umhghcxfegw )   [ Delete / Reply with quotation ]

Hi

I'm trying to cut 'x265/HEVC' '.Mkv' files.
All the files I've tested, regardless of being 8 or 10 Bit Main take a very long time to load and when the editor opens, skipping takes ages .. somtimes over 1 minute to jump 5 Minutes forward. I also remuxed the files to '.ts' to see if it's the format but that does not change a thing

While skipping, the GPU (I'm using GPU Decoding) is going up on 50%. If I use CPU Decoding the CPU goes to 100%. Scrolling 1 frame back and forth works.

It looks like it decodes the movie always from the beginning, as skipping to somwhere at the beginning of the movie is much faster (10 seconds) then at to the end (>10min)



Florian Gamper  2019-12-18 03:37:07 ( ID:ydxivmu/3ul )   [ Delete / Reply with quotation ]

Has anyone ever used TMPEGENC 5 for editing HEVC/x265 mkv files, longer than 5 minutes.

I filed my Bug report 2 Months ago and I have not heard back from them ... I start thinking that the software is basicly unable to do so !


tkrave  2019-12-27 14:27:38 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

I don't work with those file types so I can't say. Have you tried contacting them directly about this?


FlorianGamper  2020-02-27 09:29:21 ( ID:7bemccjwpdk )   [ Delete / Reply with quotation ]

Still no response for them

HELLOOOOO

I filed one with them directly and send test files ... but
If I write them I get a "it's under investigation" ... for 5 Months ?



Snoopy329  2020-06-04 09:58:12 ( ID:ofmi6hikmil )   [ Delete / Reply with quotation ]

@Florian Gamper. I sent you an email but you didn't reply. The problem lies with the H.265 encoding. It seems that Smart Renderer 5 cannot handle the x265 codec even though it claims it can. I have had to rencode all of my 4k H.265 video files to H.264 and now they all work flawlessly in smart renderer 5.


Florian Gamper  2020-08-29 23:18:48 ( ID:ydxivmu/3ul )   [ Delete / Reply with quotation ]

I'm not exactly sure how reencoding HEVC Videos to h264
helps editing HEVC Videos. I want this codec and TMPGENC claims to be able to SmartEdit it.

BTW. Last version no can handle HEVC 8 Bit files. 10 Bit still broken.


Florian Gamper  2020-08-29 23:41:56 ( ID:ydxivmu/3ul )   [ Delete / Reply with quotation ]

Oh, and even funnier, The Video Engine seems to be capable of doing it,
As the Video Mastering Suite 7 has no problem properly opening a 10Bit HEVC file.
But it cannot smart render the cut's :(

It's now over a year since I filed the bug and nothing has been done
Very Sad



Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 13 / 982 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.