if the TMPGEnc MPEG Smart Renderer 4 can run on windows 2008R2?

Does anyone know how can I save and use again a trim story for the different types of source files?

What is a trim story?

I have some .TS files that Smart Renderer 4 fails to render with the error message "Insufficient Memory to Continue Execution of the Program". Typically this error will appear exactly on the same frame of the file no matter what options in Smart Renderer 4 I change. I have 24 gigs of memory so should not be running out of memory. It only occurs with certain HD captures which I am trying to clip the front and tail ends from.

Some of my .TS files are completely black when I open them in Smart Renderer, even though they play fine with Windows Media Player and VLC Media Player. These are Hi Def 1920x1080i files.

Hi there, I am evaluating the latest build Tmpgenc Smart Renderer, however on my first serious attempt to cut & trim a 9GB movie I am facing some problems.
Basically when cutting & trimming the movie, on some parts, the programs has huge delays (white circle rolling).
Can this be due to a damaged movie?
This is mediainfo report

General
ID : 6 (0x6)
Complete name : M:\Movies\Skyfall.ts
Format : MPEG-TS
File size : 9.47 GiB
Duration : 1h 57mn
Overall bit rate mode : Variable
Overall bit rate : 11.5 Mbps

Video
ID : 165 (0xA5)
Menu ID : 4204 (0x106C)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L4.0
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Format settings, GOP : M=4, N=24
Codec ID : 27
Duration : 1h 57mn
Bit rate : 10.2 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Bits/(Pixel*Frame) : 0.196
Stream size : 8.37 GiB (88%)
Encryption : Encrypted
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709

Audio #1
ID : 426 (0x1AA)
Menu ID : 4204 (0x106C)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 6
Duration : 1h 57mn
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -624ms
Stream size : 323 MiB (3%)
Language : Italian
Encryption : Encrypted

Audio #2
ID : 427 (0x1AB)
Menu ID : 4204 (0x106C)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 6
Duration : 1h 57mn
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -646ms
Stream size : 323 MiB (3%)
Encryption : Encrypted

Text #1
ID : 702 (0x2BE)-100
Menu ID : 4204 (0x106C)
Format : Teletext
Language : Italian

Text #2
ID : 702 (0x2BE)-777
Menu ID : 4204 (0x106C)
Format : Teletext Subtitle
Language : Italian

Text #3
ID : 702 (0x2BE)-778
Menu ID : 4204 (0x106C)
Format : Teletext Subtitle
Language : English

Menu
ID : 267 (0x10B)
Menu ID : 4204 (0x106C)
Duration : 1h 57mn
List : 165 (0xA5) (AVC) / 426 (0x1AA) (AC-3, Italian) / 427 (0x1AB) (AC-3) / 702 (0x2BE) ()
Language : / Italian

Is this software supported by anyone?

Contact customer support. This forum is just for other users to communicate/share with each other. Sometimes users might know why something is happening and sometimes they won't.

In any case, the first thing you should do if you run into a technical issue is contact customer support:
http://tmpgenc.pegasys-inc.com/en/support/support.html

TMPGEnc Smart Renderer v4.1.5.60

OS: Win XP SP3
MOBO: Intel DG45ID
CPU: Intel Core II Quad, Q8400 @ 2.66GHz
Memory: 4GB
Graphix Card: Asus NVIDIA GT240

Launch TSR4
> New Project
> Add a Clip - Source Wizard
> select "From DVD/Blu-Ray/AVCHD"
> CRASH :(

App crashes/freezes the moment you click on the "From DVD/Blu-Ray/AVCHD" button.

Crashes 80% of the time this sequence is selected.

Really hope someone can help me.
I edit a lot of .ts files, recordings off tv.
Some of them are fine and don't need 'rescueing'.

Others do, and I cannot understand why? It means the entire thing needs recoding which takes ages.
When i put the SAME file into Videredo, it works fine and doesn't need to recode the whole thing.

please - why is it doing this?

Here is the info for the file im trying to smart render:

General
ID : 2008 (0x7D8)
Complete name : H:\to sort\20130830 0057 - E4 HD - The IT Crowd.ts
Format : MPEG-TS
File size : 1.78 GiB
Duration : 35mn 58s
Overall bit rate mode : Variable
Overall bit rate : 7 090 Kbps

Video
ID : 515 (0x203)
Menu ID : 3876 (0xF24)
Format : AVC
Format/Info : Advanced Video Codec
Format version : Version 2
Format profile : Main@L4.0
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Format settings, GOP : M=4, N=12
Codec ID : 27
Duration : 35mn 58s
Bit rate : 6 158 Kbps
Maximum bit rate : 20.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.119
Stream size : 1.55 GiB (87%)
Encryption : NDS Videoguard 1/2
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709

Audio #1
ID : 643 (0x283)
Menu ID : 3876 (0xF24)
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 2
Codec ID : 4
Duration : 35mn 59s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Delay relative to video : -1s 430ms
Stream size : 49.4 MiB (3%)
Language : nar
Encryption : NDS Videoguard 1/2

Audio #2
ID : 663 (0x297)
Menu ID : 3876 (0xF24)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 6
Duration : 35mn 58s
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -1s 324ms
Stream size : 98.8 MiB (5%)
Language : English
Encryption : NDS Videoguard 1/2

Text
ID : 579 (0x243)-888
Menu ID : 3876 (0xF24)
Format : Teletext Subtitle
Language : English

Menu
ID : 257 (0x101)
Menu ID : 3876 (0xF24)
Duration : 35mn 58s
List : 515 (0x203) (AVC) / 643 (0x283) (MPEG Audio, nar) / 663 (0x297) (AC-3, English) / 579 (0x243) ()
Language : / nar / English

There are two audio streams, a subtitle text stream and a menu included in the
file you list.

None of my TV captures contain as much information as yours.
TSR4 may not support everything you have in that file.

Compare this file to your successful files and see if any of the files that sucessfully Smart Render also include all of the additional streams, text and menu. You may need to simply strip out some of the extra stuff.

It is also possible that the files you're having problems with were originally
in a different format from the ones you're not having problems with. You never know exactly what transpired when the video clips were transcoded for TV broadcast.

Plz help

Problem signature:
Problem Event Name: APPCRASH
Application Name: TMPGEncMPEGSmartRenderer4.exe
Application Version: 4.1.3.58
Application Timestamp: 51ee3ce8
Fault Module Name: EffcvBlend.vme
Fault Module Version: 9.0.6.2876
Fault Module Timestamp: 51dcd79a
Exception Code: c0000005
Exception Offset: 0001f27a
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

This is a user forum, contact support for the crash.

So I downloaded the trial version so I could try out the smart rendering to see if it would work with my video. All indications were that my video was a supported format (MPEG-4 AVC), but I couldn't get the "Smart Render Analyzer" to indicate that any of the video would be smart rendered. When I rendered, I found it was putting a water mark in the video. So I guess that is why it isn't smart rendering? So is it completely impossible to test smart rendering on my video in the trial? Why isn't this indicated ANYWHERE ON THE WEBSITE OR IN THE PROGRAM?

You should give more info about your situation.

What do you see that makes you think smart rendering isn't happening? Is it all red stripes showing up in the analysis?

Also, what are you doing to your videos? Have you tried simply outputting your video without doing any cuts/edits?

I use TMSR4 (4.1.2.57) since last month. I like "Commercial Candidates Detector" for finding easy where CMs exist in ts file.

But after smart rendering, the m2ts files outputted via TMSR4 has not "Delay relative to video" tag. So playback the file, I feel bad because video and audio are no longer synchronized.

Example (data via MediaInfo 0.7.64)

[Original file]
Audio
ID : 784 (0x310)
Menu ID : 296 (0x128)
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 2
Format profile : LC
Muxing mode : ADTS
Codec ID : 15
Duration : 30mn 14s
Bit rate mode : Variable
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
*Delay relative to video : -149ms
Stream size : 41.5 MiB (7%)

[Outputted file]
Audio
ID : 4353 (0x1101)
Menu ID : 1 (0x1)
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 2
Format profile : LC
Muxing mode : ADTS
Codec ID : 15
Duration : 23mn 44s
Bit rate mode : Variable
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 32.6 MiB (9%)


I found a solution to output as mkv. This is not smart rendering for Audio, but needs only a little more time.

I want to support "Delay relative to video".

You should contact user support and ask if you can send them a sample file.

http://tmpgenc.pegasys-inc.com/en/support/support.html

The proxy file editing feature of TAW makes editing quite efficient. However, MPEG Smart Renderer doesn't seem to include proxy file support. Is there a way to enable this or add support?
Thanks!

Please can you give me a link to download older versions of this.
I just installed the latest version and it is buggy:

1. when importing clips, coming up with 'smart rescue', even though importing those same clips in older versions worked absolutely fine.

2. wont let me drag and drop in a clip, if ive gone to the edit page then come out of it. The edit window freezes, and i have to restart the program. Again, never did this with the old version.

It started doing these things with previous newer versions, and I was uninstalling and going back to the first version i got months ago - this time i thought 'might as well try the latest version released in june' and its got all the same issues, as previous newer versions.

please please can you just send me a link to an older version so i can use that immediately.

thank you.

I have to agree that the latest version crashes/freezes quite frequently, in the most basic of tasks/actions. Also, compared to the other two main TMPGEnc applications, SR4 is slow and feels sluggish. Since it's a simpler application, I'd expect it would run much smoother. I really hope they'll optimize it soon.

I'd also be interested in links for previous versions, since the current one is causing many stability problems to me as well.