By the way: Do you have any idea why my PC almost every time I encode into mpeg2 with tmpegenc freezes at some point during the process (to encode 1 hour of avi takes me roughly 8-12 hours normally). My operating system is win 2000.

Before I used to encode directly from the DVD burning programm which came with the DVD burner. The quality of mpeg2s was shit, but at least the computer did not freeze during the process.
Tx,
Tom

Thats annoying, maybe you don't have enough RAM to cope with the operation.

Encoding a 1 hour avi would take me less than 2 hours, it shouldn't take anymore than 3 hours, and should definetely not take 8 hours.

Find your answer at: http://www.dvdrhelp.com

Tom
I sit here on my rattling old 550mhz 9GB 128RAM W98SE and it can take me 12 hours overnight to encode an hours worth of .avi to mpg :(
Even then I have to close everything running in the background and leave it untouched while it plods through process.
Jo

Usually if you get an error at the same spot in the File the Problem has to do with an error in the File you are encodeing...

Matt, the speed of encoding depends on your system and encoding in a couple of hours takes a fast system.

A P3 500 would take about 10 hours or more to encode a movie whereas a P4 1.7 takes about 2 hours.

Tom, you may just need to increase the priority of relative plugin in the VFAPI plugins. Increase the priority of the directshow reader to '2' and install FFDSHOW. http://cutka.szm.sk/index.html

ASHY

Well, probably my question is somewhat trivial for you:

I have encoded my original avi. file --> the result are seperate wav. and m2v. files.

I would now like to produce one consolidated mpeg2 file to burn it to a DVD.

How do I do that?

Tx,
Tom

Well you Can"t..If useing WAV audio for the audio to make a DVD your Authoring program has to support loading the audio and Video seperately into the Authoring Program..If you want to make a DVD Compliant Mpeg 2 file you will have to use Mp2 audio in the File..Most Higher quality authoring Programs support loading the audio and video seperately...

This might be a stupid question, but can you burn dvd-r's off of a reguler cd-burner? I just got into burning movie's so I was jus' wondering. Thank's!

that would be great if it were possible. Unfortunately u need a dvd burner which will cost u a few hundred bucks!

if you are downloading movies, and u want to view them on ure dvd player, you have to split the file if it is less than the capacity of your cd accordingly.

Then use nero to burn the mpg files onto vcd. If you still are not sure, you can learn everything u need to know at : http://www.dvdrhelp.com

Yeah. I know how to do all the dvd stuff, but I just wanted to know bout the dvd-r. Because I don't like burning 2-3 cd's.

Thank's

Your right it is a bit of a daft question. If we could burn DVDr's on regular burners I think we'd all be doing it.
I'm afraid your gonna have to shell out a couple of hundred if you wanna burn DVD's.

ASHY

I've been Using Tmpg for the last year or so, with rarely a problem and getting the newer versions as they come out. Well Friday of last week, it starts giving me read and write errors while I was making a batch list of svcds. I eventually got a couple of them to finish, but I still have several that will not go over 3-70%. My computer will either freeze at some point or reboot. Well I also record a show off my tuner card every few days to make it into a vcd, and it started doing the same thing yesterday.

I have uninstalled and reinstalled Tmpg and still get the errors, here is a sample list of them:

Read error occurred at address 100066E0 of module 'dvd2avi.VFP' with 02D777A1

Read error occurred at address 016A6BF2 of module 'P3PACKAGE.DLL' with 02F31BDF

Read error occurred at address 004722E7 of module 'Tmpgenc.exe' with 20222625

Sometimes the Read Error is a Write error if it gets over 50% complete (I'm using 2passVBR). Like I've said it has just started happening in the past few days and I have not changed my computer's hardware configuration in 5 months. I do not believe I have added any software lately.

I did transfer the actual source files I was using as audio and video inputs to my laptop, put them in its dvd2avi and then processed them in the same version of tmpgenc with no problem whatsoever, except that it took twice as long as it does to encode on my desktop.

I have looked on every board I could find for a solution and apparently a few other people are having similar problems to mine. But I can't find a solution, besides its bad source files(not true here), or don't overclock your computer(which I haven't), and finally I ran memtester to check my ram for several hours and it never showed a problem with my ram.

Thanks for any help
Stephen

How about trying an earlier version??

When was the last time you cleaned up your PC and defragged your drive?

This is likely your problem. TMPG does not like fragmented sources nor does it like writing to framented drives.

Most people who are well experienced with Video encoding and editing soon learn that a seperate defragged hard drive is the best way to go, but if you only have one then creating a seperate partion for video purposes only is the next best thing.
Just make sure you use the partition for Video only and keep it defragged.

ASHY

Thanks for reminding me about that, it had been a while(over 2 months) since I done that.

I have defragged my 2 drives/3 partitions. After doing the defrag I went to pcpitstop.com and ran a system check on my machine and it showed that even after the defrag my D and E drives were still very fragmentted, probably because of the large files still on them. Some of the files that went through the defrag are still giving me problems, some of them eventually processed. Like I originally mentioned, I record a couple of shows for vcd conversion and after the defrag I recorded another show but half of the files will not process fully (still getting the same errors). I'm probably going to totally wipe (format, defrag, etc.) 1 hard drive and 1 partition on my other hard drive this weekend then load tmpg on the devoted drive and see if that helps.

Thanks for the tips
Stephen

Looking at the changes for v2.59 and above, it says "Included sampling wavelength transform engine with high quality." Does this mean the "tinny" sound produced by older versions will no longer happen? That is, most people here have told others in the past to use an external audio encoder (such as SCMPX) to avoid the "tinny" effect, but does v2.59 fix this problem?

(I know some of you are going to say "just test it" but I don't have the material anymore to re-encode for a test). :)

Well that was Probably the Idea when putting in a Higher Quality sample Rate converter, I personally haven"t really tried it Cuz I allways use a Seperate audio encoder so I can get the Best audio Quality I can..

Good news: I was able to find a copy of my source material and yes, this new setting gets rid of the "tinny" effect! Great work, TMPGEnc! :)

i can't insert a file which is edited effect by peremiere 6.5 with rendering avi format.
how can i solve this problem?

help. when i use this program to convert my file it freezes up. i end up with some green vertical lines at the top of my computer. i have yet to get throught the conversion process

Ok.....I was wondering what everyone uses to add chapters to the vcd. I used VCDEasy but it was making my video breakup 30-40m into the movie. I since stopped using it and my video is back to no problems. I hate not seeing the time show up on my player though cause the movie does not have chapters. All i see is "001". I always split my files then add chapters....that how you do it? Thanx for the help. :)

You shouldn't need to add chapters to see the playing time.
What player do you own?

ASHY

Its a Philips DVD 724 i think.

i use nero to add chapters to my vcd's.

Nero Doesn"t add Chapters...It will just add a Menu at the Beginning, Nero Vision Express will add chapters But then you have to let it encode your File also..Most Ulead Programs will Let you do Chapters Like "Ulead DVD Movie Factory 2" and "Ulead DVD workshop 1.3" and so will "Video studio 7"..I have used all of these at one time or another and they all work fairly good accept DVD workshop seems to best for Chapter"s and Menu"s...

This could be an effect of Philips players which also have the FFW and RRW problem because of sequence headers.
There is a fix which may help you by adding sequance headers to your MPEG.
Look to the part about problems.

http://www.vcdhelp.com/panasonic.htm

ASHY

This is a set top player i am talking about you realize. I have noe problem fast forwarding or rewinding. Its the time thing. All i see when playing a VCD without chapters is 001 on the readout. If i add chapters i see the time but then 30-40m in the video gets blocky throughout.

Of course I realise you have a set top.
Look, chapters are inserted at sequence points. If these sequence points aren't there or have problems then the chapters can't be inserted.
Philips players are known for their problems with disks that lack the correct sequence points and this may relate to your time problem.

ASHY

One other point.
Try disabling PBC on your player. This can cause the problem you are having. I know I have similar problem with no time on my DVD player when it is enabled.
This may cure your problem, but this also has the effect of disabling the use of menus in VCD/SVCD's.

ASHY

When i tried to convert a Xvid avi to an SVCD i get an error message saying there was an error when it tried to initialise ACM.
Does anyone know how to fix this and what/where can i download to fix it?

ACM = Audio Compression Manager.

Probably a codec problem.
Extract the audio in the XVID to a wav and use that as your audio source.

ASHY

I have an avi file i wish to convert to an mpg, I think the avi's source maybe ntsc. How can i convert the file to pal format, not necessarily using tmpgenc??? If i use pal in tmpgenc and the file i'm converting is ntsc, the mpg tends to be jumpy and not very 'smooth'.

Depends on the framerate of the AVI. If it's 23.976 then just change the frame rate and then use an audio editor to shrink the audio.

If it's 29.97 then AVIsynth is your best bet.

ASHY

how to install the download file TMPGEEnc-2.510 in my computer XP.
because i can't find the installer inside the file.

Just extract the zip and thats it.

ASHY

>Just extract the zip and thats it.
>
>ASHY


thank you for your information.

this is the msg. i got when i checked out an avi file that i was trying to
convert to mpeg with GSpot.
I want to convert an avi (not divx or xvid) to mpeg, but whenever i try
to set the avi file to the video source, the TEMPnc crushes.I tryed to raise
the priority of the Direct Show Multimedia File Reader to 1 and even 2 or
higher but i get the same result each time.
Is the fact that the Direct Show rendering is disabled connected whith the
TMPEGnc crashes? If so, how to correct the problem?


thx in advance

i tryed to reinstall the DirectX again. The GSpot didn't read no errors this time but the TMEGEnc crashed again.

I'm totally lost.
PLS HELP