This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
TMPGEnc 2.5 (Free or plus version) BBS [ Sorted by thread creation date ]
i have been trying to get an mpeg to burn properly for weeks now, it plays fine on the pc but keeps pausing when i burn to disc and play on the dvd player.
VCDEASY tells me its a non-mpeg1 audio stream (48000hz should be 44100)
also not the correct PAL format.
so i demuxed and put the audio and video in the source windows and went to settings/video and resized the pixels, went to audio and changed it to 44100 then hit start and nearly 4 hours later played it on the pc and it looks great.....except the video seems to lock up 10 minutes before the end while the audio keeps playing....WHY !!!!!!!
I cant understand why i cant burn something to disc (SVCD) that plays perfectly on the PC
Help please
If you just want to play it on your PC then why Make a SVCD??? if you are just going to watch it on your PC then you would be better off keeping it in the Format that it is allready in...and Usually Problems with the Frames freezing in the Mpeg file are due to Problems in the Source file not tmpgenc, and you will probably say that "the File plays fine on my PC so there can"t be anything wrong with the AVI file" but that doesn"t really matter, Media Players are made to skip over errors in Files were the encoder analizes every single frame and all it takes is one Bad frame and it can lock up on that one frame...
o.k thanks for reply, i tried to check it with mpeg corrector but it left an mpeg that i could do nothing with (realplayer told me i had no memory, vcdeasy wouldn't load it)
what would you recommend i check/fix it with ?
i don't want to keep it on the pc
o.k thanks for reply, i tried to check it with mpeg corrector but it left an mpeg that i could do nothing with (realplayer told me i had no memory, vcdeasy wouldn't load it)
what would you recommend i check/fix it with ?
i don't want to keep it on the pc
Well then Just Burn the AVI to a Disk, and when you want to play it Just put it in your Disk drive and Play it..There is Nothing you can do to Fix the Mpeg file, You can try to Re-Encode the AVI to Mpeg if you want but there is No gaurantee that it will work this time either..
Can some please help me!!!!
I installed this encoder and get the fucken thing to work. This piece of shit computer I have might be the problem. I been working with it for 2 days now and still cant get this fucker to work! Any help would be fucken good cuz I lost hope. Sorry if I sound mad but im pissed off with all the fucken time I wasted trying to get this shit box working so I can fucken encode a file.
Some info on what the Problem is would be nice , that is if you want help...And I hope you don"t kiss your Mother with that mouth ,Foul language is NOT allowed here pissed off or not...
Having run Tmpgenc for a while now, after a crash during processing, Tmpgenc now wont start.
The problem began with the program starting and at starting processing it generated an error "Read error occured at address XXXXXXX of module KERNEL32.dll with XXXXXXX".
It has now progressed to the program not running at all. Upon starting the program an error of "Read error occured at address BF7A125 of module KERNEL32.dll with 0078FFAC".
I have tried all the usual things like deleting the program and reinstalling it, but with no result.
It sounds Like Possibly you have a corrupted File in your opperateing system, Go here : http://www.dll-files.com/dllindex/dll-files.shtml?kernel32 and download the Kernel32.dll file and replace it with the One on your Computer and see if that helps, If it doesn"t then I Don"t Know what it could be...
I've got 52 episodes of the sopranos, but 5 of them I have are ASF files and I cannot get audio out of them from tmpg or vdub. Vdub actually says they took asf capabilities out of the program because of a copyright infringement against microsoft. Any clues??????????
What I use to extract the audio from ASF/WMV files is to use "DB Power AMP" to extract it or use it to directly encode the audio to Mp2 audio, But make sure you download the appropriate DB Power AMP Codecs....
Just use virtualdub 1.3c and use direct stream copy for audio and video then save the file as an avi and u can use tmpgenc for the new avi file.It usually works flawlessly unless the asf is damaged or improperly encoded.
that version is easily available just search yahoo "virtualdub 1.3c"
I have tried the Virtual Dub ASF and I couldn"t get it to work with ASF files(Even though that is what it is supposed to be for) I kept getting a error something like "Couldn"t find Decompressor" or something, But if you want to try it you can get it here : http://www.apachez.net/
for some asf files u need a voxware codec for audio i think
the only way i could get that codec was by using real one player to play the file and then the codec was downloaded automatically so i could play the file.
You need the voxware codec to decompress the audio but if you can hear the audio from the file then you may already have the codec and the error you have is something else
Thanks for all the help guys. I followed minions first set of instructions and downloaded the db power amp codecs, restarted my computer, put the video back into tmpg and audio showed up. Glad I didn't have to use vdub, although i have downloaded 1.3 just in case. Minion are you the programmer of tmpg or what? you know everything, so you don't even need to be on this site, yet you've helped more people than i can imagine. Thanx for all the unselfishness.
ASF uses windows media audio which should be installed by default with mediaplayer.
You can use Graphedit to extract the audio to a wav if you know how to use it or ASF tools to convert it to AVI, but I would try DBpoweramp first.
I want to convert an avi to mpeg but when i set the avi file to the video
source it sais that the file is unsupported.
I tryed to raise the priority of the DirectShow Multimedia File Reader to 2
as suggested here but it crashed instead.
Try it at "1" instead of "2"..And if that doesn"t work then make sure you have the correct codec installed and you can try Frameserveing the File with "Virtual Dub", if the AVI File is a Xvid File then try installing the FFDshow Filter/Codec and it helps with Decodeing Xvid Files and DivX files : http://sourceforge.net/project/showfiles.php?group_id=53761&release_id=131530 .
Copy the DVD2AVI.vfp file from your DVD2AVI folder to your TMPG folder.
If you still have problems, raise the priority of the DVD2AVI project file rerader to '2' in the VFAPI plugins.
I capture a file mpeg1 useing these settings:
- Video standar line : PAL(625)
- Size: 352x288
- Audio: 44,100KHz, 16bit stereo
- Video Bit Rate: 3Mbit/sec , Constant Bit Rate
and the captured file is perfect OK, but is very big so I use TMPGEnc-2.510 to make it VCD and to make it small. But when in the video file appears some motion scenes TMPGEnc insert lots of square. In the original file everything is OK.
That is pretty much an average vcd if it has pixels/squares during high quality action scenes a vcd compiant file has a 1150 video bitrate so if your other file is 3000 bitrate then you have to lose quality in order to make the file size smaller.
If you use 2-pass encoding for a vcd/mpg in tmpgenc then it will use a higher bitrate for action scenes when it's needed and less for scenes with little motion in which a lower bitrate can be used.
Also you may want to try to make an SVCD in my opinion a bitrate of 2200 CBR is near dvd quality and good enough for any average movie.Svcd gives more detail but most dvd players will not play SVCD.
Useing the CQ Method will give better results than CBR and take less that half the Time of 2-pass VBR, and setting the "Motion Precition Search" to "High Quality" will help with High Motion scenes...
Download i tfrom the website, reload it then register it on the registration pull down. That will reactivate it. Sometimes it remebers because your registry still has the key with the serial number.
i have a dvd screener that i downloaded. in one part on the movie the video hangs and the audio continues to play. so now when i try to encode it the video hanging up keeps it from encoding the rest of the video. any way i can fix this or at least cut that little section out of the avi file?
You should try to split the video with virtualdub by selecting stream copy for video source.
Or just select the SOURCE RANGE when encoding with tmpgenc you should encode it up to the damaged area and then start right after that part with the second encode.
You probably need to extract the audio from the AVI file to a WAV file then use the WAV file as the audio source..The audio was Probably AC3 and Tmpgenc has Problems with AC3 so you can extract it with something like "AVI_Mux"...
I had the same problem and used VirtualDub to extract the audio from the .avi.
Then I used the .avi and the .wav to create the .mpg file.
The result of this was that all of a sudden the audio and the video were completely out of sync. I have tried it several times and also with different .avi files. I get the same result everytime...