my media file is already in mpeg format and has extension .mpg
how can i use this program to burn it onto a cdr with my cdr drvie?

well, depends:

is it a VCD?

if so u can use nero to burn it or adaptec but nero is recommended

if it is not a VCD but want to burn it, just burn it as data CD

Techno

Has anyone found a way to limit the max/min bitrate per frame (not just per second) in CBR mode? Or to control it in some way.
Thanks,
Ric

not in CBR, but in Auto_CQ or CQ

if u use the auto_CQ or the CQ, make sure u have the enable padding box enabled.

Techno

no wait, didn't understand that question properly, I do not think there is a way

Techno

Hi,
I use TMPG Enc 2.53.

I tried to convert 960*540 bmp to mpeg2 format file.
But I got a error message
"The resolution of the video is illegal.
> The windows size needs to be set between 8*8 and 4088*4088.
> The width and height of window needs to be multiple of 8."

Is it impossible to convert 960*540 bmp to mpeg2 format file using TMPG Enc?

if so, is there any way to do this?

Please understand I'm not good at English. ^^

you must resize the video:

480*480 / 640*480 etc...

Techno

I need you to solved my problem here. I want to encode to SVCD format. I had a mpeg1 encoder using PV233 chip and Zoltrix capture card. Which one is prefer for good quality recording wheather using avi without compression or mpeg1 (CBR 6144 Mbps)? When I encode a video signal using Zoltrix at higher rate (480 x 480) it showed jerking picture and why the avi file processed at 15 frame per second?

Hmm.

You should check www.vcdhelp.com on the capture thing. What I know is that AVI capturing takes up a lot of space, if you are really into this maby you should check out the WinTV PVR or the RealMagic DV card. They are great since AVI capturing is hard and difficult getting it good as well but it's cheap.

/Regards Dennis

actually, go for the hauppauge wintv go pci and use these high settings:

NO RECOMPRESSION
YU12
320*240
25/30fps
CD quality audio

This will give you high quality but will take up alot of hdd space, but it is worth it.

then convert to VCD/SVCD in TMPGENC and will be done quick.

Techno

download this progamm and trying to convert .avi to .mpg
and coming error that cannot load >>>>>>P3Package.dll<<<<<<<<<!!
where I can take this file and what is that???????????

At the top of this BBS, type "P3Package.dll" into a box which is right next to "Search" button, then press "Search", then you will find answer.

When i convert avi to mpg... i will convert it. and then play it in windows media player.. and the color will be fine one minute and then do pinkish the next..a nd it will go on and on, etc.... I think it has a major bug or something...does anyone know the problem.. thanks

try to decrease the directshow priority in the environment settings

Techno

Remove the Angel potion codec from your system and install Divx 4.12.

ASHY

What is the best way to remove the program from my computer?

Well uninstall it I guess.

The thing is with windows uninstall that it dosn't remove all files and the worst thing, registry entirys to some degree are left behind.

Help

All of the sudden I'm getting 2 error messages that I've never seen before. Right when I try to launch TMPGEnc. I've never had this problem before.

First one says "Read error against address 0229DB4A" and the second "Run Time Error 216 at 0003D850

I was running version 2.52.xx. I deleted it and tried again. I defragged the hard drives and ran check disk. Rebooted and got the same errors. I downloaded version 2.53 and got the same error's.

These are coming before I can even run the program. I don't know but in Premiere 6 I encoded a movie to MS DV AVI instead of just the regular MS AVI. I's stumped. Can anyone offer some help?

Please do not encode, but use the Avisynth Premiere Plugin. Look at www.vcdhelp.com

Good luck

Did you ever get this figured out. I have the exact same problem.

Thanks
>Help
>
>All of the sudden I'm getting 2 error messages that I've never seen before. Right when I try to launch TMPGEnc. I've never had this problem before.
>
>First one says "Read error against address 0229DB4A" and the second "Run Time Error 216 at 0003D850
>
>I was running version 2.52.xx. I deleted it and tried again. I defragged the hard drives and ran check disk. Rebooted and got the same errors. I downloaded version 2.53 and got the same error's.
>
>These are coming before I can even run the program. I don't know but in Premiere 6 I encoded a movie to MS DV AVI instead of just the regular MS AVI. I's stumped. Can anyone offer some help?

I'm trying to make an SVCD and I get the error message that my MPEG2 tril period is up. What's the deal? And what is the solution?

Please help.
Chris Bell

Go to article No.18222

and also read : article No.18977

How and where do you go to use the info "Go to article No.18222 and also read : article No.18977" that you supplied?

> How and where do you go to use the info "Go to article No.18222 and also
> read : article No.18977" that you supplied?

There is "article number" at the right top corner of each thread!
This thread is No.19004.

Click "next page", then you will be able to see articles I have pointed.

The is no video when i start the proccess of converting AVI to MPG, I need to do this for some family videos and so on. Thank you to anyone who can help, i need these for VCD thats why i need them in mpg cause thats what my burning software wants. THank you

Hmm sounds like important thing.

I suggest you have a look at the guides on howto convert.

http://www.vcdhelp.com or http://doom9.net

If you are converting famliy vidios I guess you really want it to be done the right way :)

if it is a DIVX v5 file, it is not compatable

uninstall DIVX v5

install DIVX v4.11 or v4.12

load in the avi and encode

this will work

Techno

I just noticed that under "Settings" "Video" tab that "DC Componet precision" says higher the smoother video. anybody have an opinion on this setting? 8 bit...10 bit....slower, better?

Hmm

I don't think it matters much, I allways stick to the standard templates, have worked fine for me, with excellent quality of the encoded videos etc. I don't care too much for the setting just the ones you can change when you load up a template.

:)

sometimes it makes it a bit more smoother when played on the PC or the DVD player.

Techno

The setting relates to the type of movie you are trying to encode. If you are encoding a movie with a lot of calm scenes then a higher precision would be appropiate. The opposite goes for action movies with a lot of movement, the lower setting is more appropiate.
You wouldn't normally need to worry about this because it's effect isn't a great deal.

ASHY

Has someone posted a set of guides for TMPGEnc that show which setting one could/should tweak to balance between file size and quality?

My specific issue has to do with converting an AVI to VCD. The resulting file is a tad too large for a CD (~851MB). I am looking for the setting that would knock back the file size with minimal impact on the quality. Surely I can't be the first to ask this question.

Try demultiplexing the file and re-encoding the audio at a lower bitrate and then re-multiplex it.

ASHY

Here is a good guide regarding that matter from www.vcdhelp.com. Dont miss the forum discussion that follows. The arctile depends that your player can cope with non standard VCDs. Esp. VBR.

http://forum.vcdhelp.com/viewtopic.php?t=84759

Btw. You can fit 900 MB on an 90 mins media in (S)VCD format but not any CD-Rom/Player can cope with that. At least most Yamakawa, Scott and Cyberhome players can.

Btw. Something weird is hapening with posting threads, its not the first time I see an multiple post or and moved posting(not only from me :)

M.Bastian,

Thanks for the link. I'll give it a try.