hi, where is number copies options ( blu ray ) in writing tool in TAW 5

best regards

No where. I use ImgBurn instead to burn DVD and Blu-ray's. Its easy to use, has a great dual-layer support and best of all: Its Free

Hi,

with TAW5 can I create Blu-Ray menu as I like, for example

First Menu
|
|-------> Second Menu (to choose Track 1, Track 2, etc..)
|-------> Third Menu (to choose Track 10, Track 11, etc..)

This example is to author some TV series and to use one disc to multiple series: first menu it's to choose what series and the others to choose episodes.

Thanks in advance

Is there any information if NVENC hardware encoding (H.264) will be supported by TMPGenc Video Mastering Works in a near future or in any future? Are there any plans, timelines in the company regarding this?

Kindest regards!

NVENC is an alias for NVIDIA, so that should already be supported.

I don't think that the NVENC of the GK graphic card are use by TMPGEnc.
TMPGRENc use CUDA technology (Nvidia OpenCL). NVENc are the same technology like the QSV of the Intel Core Processor.

I'm getting estimated output times of 500 hours for a Blu Ray. Any way to reduce this?

I'm running Windows 7 with 4GB RAM.

Any help much appreciated!

How long has the output been running when you see this estimate? It can sometimes take a couple of minutes to normalize and get a more accurate output time.

The longest I've left it is about 20 minutes and I have got a 250 hour estimate.

What kind of processor do you have?
How long is your video?

It's some sort of Intel ViiV and I'm doing about 4.5h.

It's also half-way there after 20h, so much better!

I'm getting 899 hours for a single-sided DVD. Unfortunately, at my age, I don't have time...

Roughly 8.5 hours to complete a Blu-ray with 3 movies in 1080p on it.
But then, i also built my own computer with the largest CPU i could get for my motherboard (3.4 Ghz Phenom II X4) and 16 GB quad-channel HyperX RAM.
Has that hardware under Windows 7 64bit.

I have one large working Mpeg file. I need to make the one file into multiple files and put them onto CD,s. File is 5 hours long mpeg 1. I would like to break the file up into files to fit on a CD in one step. Making 5 video files at 700mb each so I can burn the full movie onto seperate disks. Is there anyway to do this in the final step to make your movie?

You can split your movie into 5 equal video clips in the cut editor.
Use the keyframe tool to set 5 keyframes equally apart.
Then go to each keyframe and set a split point.
Upon exiting the cut editor, choose to split and keep the blue and orange clips. You should now have 5 clips.
At output, choose to output each clip as a separate video.

The easiest way to make an MPEG that will fit on a CD is use a constant bitrate (CBR). This will allow you to know exactly how bit the output file will be. Adjust the bitrate until it will fit onto a CD.

I was always able to convert mkv files to dvd through tmpgenc authoring works 4 on Windows 8 but updated to Windows 8.1 and no longer able. I get the message "Could not open the video part of the file xyz.mkv. Only the audio part can be opened". I have tried updating a number of codecs but with no luck so far. The mkv plays fine on the laptop but only tmpgenc can't open. Please help!!

For my home videos and such, I often have three tracks: video track, slideshow track, and finally a credit track which contains date, location, etc...

I have several videos in the video track, and several slideshows in the slideshow track, but I only have one credit page.

So far, I've been able to fit the credits on one screen. So I add just one file (a dummy file) in track three but un-check it so it won't show up on the menu. I also remove the play button. Then I put the credits on the background image. Finally, all you see are the credits and a Return button.

But if the credits cannot be fit onto one page, I would like to create a slideshow of 2 or 3 pages of credits, but unlike the other tracks, I would like this one to auto-play. - Otherwise, the user must click track 3, and then click play (which is redundant because there would be only one slideshow).

Is there a way to do this in TMPGEnc Authoring Works 5?

Thanks again for all.

I doubt that this is possible, so I want to let it be known that this is now a Request!

Some of my .TS files are completely black when I open them in Smart Renderer, even though they play fine with Windows Media Player and VLC Media Player. These are Hi Def 1920x1080i files.

Hi there, I am evaluating the latest build Tmpgenc Smart Renderer, however on my first serious attempt to cut & trim a 9GB movie I am facing some problems.
Basically when cutting & trimming the movie, on some parts, the programs has huge delays (white circle rolling).
Can this be due to a damaged movie?
This is mediainfo report

General
ID : 6 (0x6)
Complete name : M:\Movies\Skyfall.ts
Format : MPEG-TS
File size : 9.47 GiB
Duration : 1h 57mn
Overall bit rate mode : Variable
Overall bit rate : 11.5 Mbps

Video
ID : 165 (0xA5)
Menu ID : 4204 (0x106C)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L4.0
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Format settings, GOP : M=4, N=24
Codec ID : 27
Duration : 1h 57mn
Bit rate : 10.2 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 25.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : MBAFF
Bits/(Pixel*Frame) : 0.196
Stream size : 8.37 GiB (88%)
Encryption : Encrypted
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709

Audio #1
ID : 426 (0x1AA)
Menu ID : 4204 (0x106C)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 6
Duration : 1h 57mn
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -624ms
Stream size : 323 MiB (3%)
Language : Italian
Encryption : Encrypted

Audio #2
ID : 427 (0x1AB)
Menu ID : 4204 (0x106C)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 6
Duration : 1h 57mn
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -646ms
Stream size : 323 MiB (3%)
Encryption : Encrypted

Text #1
ID : 702 (0x2BE)-100
Menu ID : 4204 (0x106C)
Format : Teletext
Language : Italian

Text #2
ID : 702 (0x2BE)-777
Menu ID : 4204 (0x106C)
Format : Teletext Subtitle
Language : Italian

Text #3
ID : 702 (0x2BE)-778
Menu ID : 4204 (0x106C)
Format : Teletext Subtitle
Language : English

Menu
ID : 267 (0x10B)
Menu ID : 4204 (0x106C)
Duration : 1h 57mn
List : 165 (0xA5) (AVC) / 426 (0x1AA) (AC-3, Italian) / 427 (0x1AB) (AC-3) / 702 (0x2BE) ()
Language : / Italian

Is this software supported by anyone?

Contact customer support. This forum is just for other users to communicate/share with each other. Sometimes users might know why something is happening and sometimes they won't.

In any case, the first thing you should do if you run into a technical issue is contact customer support:
http://tmpgenc.pegasys-inc.com/en/support/support.html

for what you TMPGEnc Authoring Works 5 Batch authoring tool can be used?

You use the batch authoring tool if you have multiple projects that need to be output. The batch tool will output them one after the other, allowing you to do other things. It will not burn to disc, just output the necessary files that can be burned to disc.

Hi, I have a question so I bought via the internet software
TMPGEnc Video Mastering Works 5 of its full version is 5.4.1.102 paying with VISA card in the amount of $ 112.48 now or in the options can I download the free plug-ins to that version of the software or any of them For instance plugin for AC3 5:1 hmmm I must be purchased separately .....?
Can somebody help me and explain what and how, I would appreciate it greatly for your help.
I'm sorry that some words can be confusing, but I do not know enough English to make it perfect to use when writing the message and I use the translator on the internet to be able to pass it on the forum here.

Plug-ins are not included and must be purchased separately.

You do not need the AC3 plug-in for Video Mastering Works 5 since it already has AC3 support.

After updating to Windows 8.1 Pro, video mastering works 5 will not open and hangs on "launching the application"

Works fine for me. Also using Windows 8.1 Pro. What version of TVMW5 are you using?

I have the latest from the download site. It was working fine on Windows 8 Pro then I updated to 8.1 Pro and all of a sudden it would not open. I have also just found out that Authoring 5(5.1.3.57) too is doing the same, stuck in "launching application" since last night

Now it has gone pass the launching application screen because I disabled my windows defender and even my firewall. I have also uninstalled both Video Master 5 and Authoring 5 and reinstalled both. BUT I cant add any clip, when I select add from file, nothing happens, just that my cursor start with the busy cursor revolving thing, but no window popup to select any file. This is happening to both programs