Pegasys Products BBS

Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.


Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 214 / 983 ]   Next > >>
Classify Product Title User name Reply Last update
Question TAW4 Upgrading from DVD3+etc+etc+etc to DVD4Works Richard 3 2008-12-16 22:33:40
Question TAW4 Run time of DVDs StarFishes 3 2008-12-24 09:44:44
Question TE40 MOV conversion - crush chuckumi 3 2008-12-19 15:12:11
Question TE40 NVidia 9300M GS & CUDA PeppeTom 1 2009-01-13 18:53:05
Question TAW4 Pans not good on the dvd Kysten 1 2008-12-15 23:04:39
Question TE40 Video Stutter sarge_in 1 2009-02-28 23:15:49
Question TE40 PSP 720X480P MP4 two question profun 1 2008-12-18 00:08:02
Question TE40 Deleting Source Files After Task Completion RJ 2 2008-12-14 22:48:22
Question TAW4 DIVX Ultra 1080p? HEADRAT 6 2008-12-22 19:47:28
Question TE40 How to make psp 720x480p compatible MP4 file? ******* 5 2009-02-01 02:06:56
Question TME3 Transitions JoeComp 1 2008-12-10 01:01:53
Bug report TDA3 Sony M2TS file import causes freeze Richard Tang 0 2008-12-06 13:17:39

Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 214 / 983 ]   Next > >>
Question - TAW4 - Upgrading from DVD3+etc+etc+etc to DVD4Works No.61608
Richard  2008-12-14 20:02:48 ( ID:vjfgcgptoh2 )   [ Delete / Reply with quotation ]

I've read enough here to know not to actually install an update from version 3.1.2.176 to version 4.anything. At least not since I don't wish to be a "beta testor in production mode."

Nevertheless, I'd like to get some thoughts/advice from those who have the products and/or have dealt with Pagasys in the past.

1. There is currently a good upgrade discount of 40.00 USD. Does anyone see a *total* waste of money by buying the update and just leaving the installation file(s) sitting on my disc for about 6 months? That is, I'm not going to actually apply the upgrade, just buy the files, and do the upgrade at some later date when the product is stable and reliable. I'd hate to miss out on a 40% discount six months from now.

2. Has anyone actually run the 4.x Trial side-by-side with the 3.1.2.176 production version? Does installing the Trial foul up the production version (e.g., does it overlay DLL files so the production version will no longer run?)

3. Can a version 3 Project File be imported into version 4? At any one moment I might have 2 to 4 projects going. As I close down one, I start another. Most of the time I'm waiting on feedback from the person who's hired me, so I leave their project alone while I go work on another. When I eventually do upgrade, I'm likely to have active project files that need to be readable by version 4. That is, I don't think I'll ever be at a point without even one Project File being "live."

4. Templates. OK, let's get real. Downloadable templates are absolute compromises for my clients. Clients have their own images and font preferences, they want this blurring effect or that outer shadow, etc., all on their own image backgrounds.

I've never found a way to fully build an entire menuing template in version 3. I know I can download more, but as I said, those are a total compromise and not of any interest to me. Can I build an entire menu template in version 4? By this, I mean I might like to place thumbnails in a diagonal from top/left to bottom/right, or arrange them in an oval on the screen. Apply my own button graphics. Apply my own default template background image. Apply my own font choices for various pieces (1 font for the title, another for the track list entries, etc.) Then save it all as a menu template, choose the wizard, apply my template and I'm mostly done.

I have 3 clients so far that routinely have me put their vacation videos onto DVD and apply a menu. They always want the menus to look and act the same. The theme more or less creates a suit of DVDs, all of them looking the same with the same colors, fonts, etc. Right now I have to build each one by hand. I'd like to create templates and name them for my clients.

Can I do this extensive work in version 4, or are templates still a deep, dark secret held by Pegasys who for some reason feels they can't put that power into the hands of their customers?


tkrave  2008-12-15 19:05:11 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

1. I don't think it's a total waste, but I also don't think you need to rush to make a decision since the upgrade price will probably be around for a while.

2. Installing the trial for Authoring Works 4 shouldn't affect your DVD Author 3 production version.

3. You can import version 2 and 3 files into version 4, provided that the source files are still in the same place. If you used templates that don't exist in version 4, then they'll probably be replaced with a different template.

4. You can save custom menus as templates in version 3 and 4. Once you've built your custom menu to your liking, click on the "Edit menu" button in the Menu stage and select "Save current menu as a new template". Once you do so, it will show up as a template in the template list. It'll save effects, backgrounds, fonts, etc.

Version 4 also lets you create your own button sets for custom menus.

I suggest you download the trial and try it out and see for yourself whether it will be worth the upgrade or not.


Richard  2008-12-16 19:31:54 ( ID:vjfgcgptoh2 )   [ Delete / Reply with quotation ]

Thanks. I never knew about the template "save as" option. Looked at the help text (pretty much useless) and searched the forums but never found anything. A request for help from Pegasys several months ago only yielded advice that I could download the templates they made, but they circumvented my question about creating my own.

I'll download the demo and install it side-by-side with version 3, per your advice.


tkrave  2008-12-16 22:33:40 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

One thing about upgrading: I think that once you purchase the upgrade, your DVD Author 3 license becomes invalid, so you wouldn't be able to use version 3 and wait for version 4 to become better.

However, you should be able to use both versions 3 and 4 if you purchase version 4 with the user discount which is a $20 savings.



Question - TAW4 - Run time of DVDs No.61604
StarFishes  2008-12-14 18:55:39 ( ID:omkjonuftao )   [ Delete / Reply with quotation ]

Hello everyone,

I need a little help with authoring my first family movies with TMPGEnc Autoring Works 4. I created some mpg-files and wanted to bring them on DVD. Everything works just fine, the only problem is, that only 40-50 minutes fit on one DVD which seems much too little for me. The files are standard resolution 720x576 PAL, so it should be possible to bring 2 hours of film onto one single DVD or not? It is possible to make it fit on one 4,7 disc, but I think it implicates quality loss this way. Do you have any ideas?

It would be great if you had any suggestion, thank you in advance!
StarFishes


Richard  2008-12-15 00:59:25 ( ID:vjfgcgptoh2 )   [ Delete / Reply with quotation ]

I'll take a stab at some suggestions for you, bearing in mind I have version 3, not 4.

In version 3, you can assign defaults for all new projects and override those settings on a case-by-case basis. The defaults are found under Options.Preferences.

Take a look at your audio settings. Did you record the Berlin Philharmonic, or did you record your children playing soccer? Do you need super, high quality sound? Now, I'm an audiophile and I can hear the difference if I'm listening on good headphones, but for everyday stuff over external speakers, I find a sampling rate of 48000Hz, 16 bits and 192 Kb/s bitrate is just fine for spoken sound, and 96000Hz for music. My point here is, the higher quality you use, the more space on the disc it takes to record it. Back off on the audio settings if you don't have movies that demand impeccable sound.


Are your menus animated? That is, do you have thumbnails to select scenes and those thumbnails themselves are small, short, movie clips? Try making single-frame thumbnails.

Just some ideas.

Richard


tkrave  2008-12-15 19:10:07 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

Besides the excellent suggestions by Richard, your only other choices are lowering the video bitrate (which it sounds like you don't want to do) or use a dual layer DVD.


StarFishes  2008-12-24 09:44:44 ( ID:omkjonuftao )   [ Delete / Reply with quotation ]

Hi Richard and tkrave,

thank you for your suggestions! I did some experiments in changing the video and audio bitrate which has been very high set by my video capture card. I found out that a constant video bitrate of 4000 seems to be acceptable, the audio I set to 168 and now everything works just fine.

The only question I have now is what the application does with the setting Fit on DVD 4.7. It doesn't ask me anything about compression.

Greetz,
StarFishes



Question - TE40 - MOV conversion - crush No.58585
chuckumi  2008-12-14 15:54:05 ( ID:bcvnivf9gr6 )   [ Delete / Reply with quotation ]

When I want convert any video to QuickTime MOV, TMPGE show me error message:
An error occured during the file output inicialization. (-50)

Others video conversions working.

Sorry for my english.


tkrave  2008-12-18 00:02:17 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

Do you have the latest version of Quicktime?


chuckumi  2008-12-19 15:06:26 ( ID:bcvnivf9gr6 )   [ Delete / Reply with quotation ]

Yes, I have


chuckumi  2008-12-19 15:12:11 ( ID:bcvnivf9gr6 )   [ Delete / Reply with quotation ]

I have Vista OS 64-bit , QuickTime 7.5.5(990.7).



Question - TE40 - NVidia 9300M GS & CUDA No.58583
PeppeTom  2008-12-14 15:44:18 ( ID:dtpfgj5/qyr )   [ Delete / Reply with quotation ]

I'm using a Sony Vaio Z Laptop with a GeForce 9300M GS running XP doing a lot of video editing work with TMPGEnc 4.0 XPress. I bought this machine because of its small size and because its takes advantage of the GeForce 9300M GS and CUDA Technology for faster renders.

However, the latest version of TMPGEnc 4.0 XPress shows a grayed out area on the Preferences tab under options when i try to activate CUDA.

I confirmed with Nvidia that for sure the GeForce 9300M GS supports CUDA and I tried both Sony official Nvidia drivers for the Z (which include the CUDA.dll files) and also the latest Official Nvidia Drivers with CUDA support.

No luck with any drivers. I was under the assumption only the GeForce8800 GTX/GTS video card using the G80 core were not supported! :( As a $100 piece of software with basically no support, Im extremelly upset.


tkrave  2009-01-13 18:53:05 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

Contact support, it's possible that it's a known issue and they may have a temporary solution.



Question - TAW4 - Pans not good on the dvd No.61602
Kysten  2008-12-13 22:21:15 ( ID:mjkiobrw9gc )   [ Delete / Reply with quotation ]

Hi

I have just finished my first dvd and used some pans with the videocamera, but they appear pretty bad on the dvd. They are uneven and that don´t look good. What can I do to solve the problem?


tkrave  2008-12-15 23:04:39 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

What are the details of your source video (framerate, file format, resolution, NTSC/PAL)?
What are your output settings?



Question - TE40 - Video Stutter No.58581
sarge_in  2008-12-13 10:17:04 ( ID:edjtwlsabff )   [ Delete / Reply with quotation ]

When I convert DVD-Video to MPEG-4 AVC format (Main profile, Level 4, 720x480, Display 16:9, 29.97fps, 2-pass CBR, 4500 kbps, motion search 256, NTSC), the video has a bit of stuttering (the original is fine and smooth with no stuttering at all). It is quite small, but definitely present, especially when the camera pans. The resulting video actually hurts my eyes and gives me a headache over a period of time!

Wondering if I can tweak any conversion setting to make the video stutter-free, or reduce it significantly?!

Thanks!


citric_acid  2009-02-28 23:15:49 ( ID:hpktepc8w.. )   [ Delete / Reply with quotation ]

Try again but this time shut off antivirus and firewall, disconnect from Internet to be safe, and check your processes for any antispyware programs that may interfere with the transcoding. I stop processes like Windows Update checker, Java, and some HP stuff for my scanner.

Another thing, it helps if you don't use your computer when it's converting.



Question - TE40 - PSP 720X480P MP4 two question No.58579
profun  2008-12-13 09:27:37 ( ID:qfs3sgyeasg )   [ Delete / Reply with quotation ]

I encoded 720x480p MP4 files and it works in my psp2000,but I found two problem,
first,the source file is 25 fps,then change to 23.976fps,when it done,it is pausal when playing,when i change fps 25 or higher,then it's perfect.
the second,the sound part is aac 192k,but it display 128k in my psp,I try to change
160k or 92k,but it's still display 128k,i play on my computer it display the ture number.why?


tkrave  2008-12-18 00:08:02 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

I guess the psp can't handle 720x480p video with a framerate lower than 25 fps? I'm not completely familiar with the limitations of 480p video on the psp, but if you found that 25 fps or higher works, then you should use those settings.

As for the AAC 192k issue, I'd be inclined to believe the computer over the psp. Maybe the psp has problems reading the header file and obtaining the correct file data.

A psp forum might be a better place to get answers for these questions.



Question - TE40 - Deleting Source Files After Task Completion No.58576
RJ  2008-12-12 14:45:45 ( ID:v4nlqe7prl. )   [ Delete / Reply with quotation ]

Is there anyway of deleting the source files after conversion automatically?


tkrave  2008-12-12 19:37:16 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

I'm pretty sure this is not possible.

In my opinion, that's a good thing. If the original files were deleted and you weren't happy with the encode, you'd be screwed.


RJ  2008-12-14 22:48:22 ( ID:v4nlqe7prl. )   [ Delete / Reply with quotation ]

Well, I do identical encodes on a daily basis so my encoding settings are finely tuned. This would be very valuable doing a large amount of encoding; I.E. I have 400 GBs to encode on a 500 GB hard drive.



Question - TAW4 - DIVX Ultra 1080p? No.61595
HEADRAT  2008-12-11 15:09:06 ( ID:6idu5nab3yr )   [ Delete / Reply with quotation ]

Hi,

How do you select DIVX ultra to encode at 1080p, the higest resolution seems to be 640x480?

HEADRAT


myself  2008-12-12 08:01:10 ( ID:uexq2jhhhql )   [ Delete / Reply with quotation ]

Looks like the maximum resolution permited by DivX Ultra is 720 x 576.


HEADRAT  2008-12-12 08:12:15 ( ID:6idu5nab3yr )   [ Delete / Reply with quotation ]

Well that's stupid, if this is supposed to be the all singing all dancing HD app why can't I choose HD resolutions :(


myself  2008-12-12 09:23:15 ( ID:uexq2jhhhql )   [ Delete / Reply with quotation ]

I think you can choose high resolution by setting the track´s profile option to "none" but may be the player wont be able to reade it correctly.


tkrave  2008-12-12 18:21:15 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

You can also use the DivX HDTV profile which lets you go up to 1280 x 720 resolution. However, I'm not sure if DivX Ultra DVD players will be able to play this at full resolution. Should play fine with DivX Player software on a computer though.

To change profile (or use no profile), in the Source stage, click on the Settings button in the track list. A track settings window should appear.
Click on the Video tab and select "Re-encode all videos as below" for the Encoder mode.
You can then change the Profile & level option to "HDTV profile" or "None" which will allow you to increase the output resolution.


lschaudies  2008-12-21 15:31:57 ( ID:hww43x32poa )   [ Delete / Reply with quotation ]

If you do as suggested and change to Re-encode all videos as below and select the HDTV profile the program still only allows a maximum resolution of 1280x720 which is not the full Divx potential of 1920x1080. TmpGenc Express is the only program of theirs I have found which will let you select 1920x1080 divx. I am disappointed that TMPGEnc doesn't allow full resolution Divx to be encoded in this software.


tkrave  2008-12-22 19:47:28 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

As "myself" said, you can choose "None" for profile which WILL allow you to encode at a full 1920x1080 resolution. If I recall correctly, 4.0 XPress operates in the same manner.



Question - TE40 - How to make psp 720x480p compatible MP4 file? No.58570
*******  2008-12-09 04:29:16 ( ID:qfs3sgyeasg )   [ Delete / Reply with quotation ]

I want to make a psp 720x480p compatible MP4 file so I can play it on my PSP.
But anyone could tell me the detail?


tkrave  2008-12-09 20:45:17 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

In the format stage, select "MPEG-4 file output", and select "MPEG-4 AVC format" as the stream type. Click the "Select" button to proceed to the next step.

You can then adjust the bitrate, rate control mode, or whatever else you want. Details about the PSP's max bitrate seem to vary, but if this thread ( http://boardsus.playstation.com/playstation/board/message?board.id=pspmedia&thread.id=197737 ) at the Playstaion forum is to be believed, you can go pretty high with the bitrate.

I've never actually used this high of a resolution on my psp, but I don't see why it wouldn't work. Maybe I'll try it when I get home tonight.


Pwnsweet  2008-12-16 10:53:18 ( ID:xslnwwpmrq2 )   [ Delete / Reply with quotation ]

720x480 video is overkill for the PSP as there are only 480 pixels on the horizontal and 272 pixels on the vertical of the PSP's screen. Any video that has a resolution greater than 480x272 WILL NOT WORK on your PSP.

Therefore, if you are transcoding widescreen video, I suggest you set the resolution to 480x272, and if you are transcoding 4:3 video I suggest you set the resolution to 368x272. In both instances you want AT LEAST 384kbps bitrate, if not 512kbps for movies where quality is of greater importance.

These are the settings I use for Widescreen video and square video respectively:

4:3 Video - http://cid-b8f1db3b9d8d34bd.skydrive.live.com/self.aspx/.Public/MPEG-4%20file%204.3%20output.txp4e

16:9 Video - http://cid-b8f1db3b9d8d34bd.skydrive.live.com/self.aspx/.Public/MPEG-4%20file%2016.9%20output.txp4e

The advice I just gave you is the result of about 1 week solid learning to optimally transcode video to the PSP. Use it or discard it, it's up to you.


Pwnsweet  2008-12-16 11:09:48 ( ID:xslnwwpmrq2 )   [ Delete / Reply with quotation ]

Correction: 720x480 video will work on the PSP


tkrave  2008-12-17 02:48:45 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

I'm guessing they upped the resolution threshold so you can output higher resolution video when you use an external monitor with the psp-2000.


Pwnsweet  2009-02-01 02:06:56 ( ID:xslnwwpmrq2 )   [ Delete / Reply with quotation ]

My updated 4:3 and 16:9 settins for PSP, based on 1 pass Quantization. MUCH better quality than my last uploaded settings and SMALLER file size. Quantization ftw.

http://cid-b8f1db3b9d8d34bd.skydrive.live.com/self.aspx/.Public/MPEG-4%20file%204.3%20output.txp4e

http://cid-b8f1db3b9d8d34bd.skydrive.live.com/self.aspx/.Public/MPEG-4%20file%2016.9%20output.txp4e



Question - TME3 - Transitions No.61157
JoeComp  2008-12-07 01:54:15 ( ID:v6tlqxx8ilm )   [ Delete / Reply with quotation ]

I just installed MPEG Editor 3 and am having trouble inserting transitions between key frames. I can find no way to make the insertion and the user manual is very vague about it. Is it possible that there is something wrong with the program?


tkrave  2008-12-10 01:01:53 ( ID:lgrl8ryjzyl )   [ Delete / Reply with quotation ]

Transitions can only be applied between clips, so to insert a transition into one clip, you'll have to first divide the clip into two clips.

See the post below about clip splitting for instructions.
Once you have two clips, go back the Source stage's main window and click on the "Transition editor" button on the right side of the window. This opens the transition editor window.
Here, you can select your transition and press "OK" to apply it. Back in the Source stage, an orange arrow with "TR" in it shows that you have applied a transition effect.

Once you're happy with your transitions, you can go to the Format stage. Here, make sure that "Single file output" is selected as the Output mode.

Now it will be outputted as a single file with all of your transition effects applied.



Bug report - TDA3 - Sony M2TS file import causes freeze No.60826
Richard Tang  2008-12-06 13:17:39 ( ID:dbikxrau5ig )   [ Delete / Reply with quotation ]

MPEG2 streams recorded using Sony PlayTV on the PS3 are in a M2TS format. When I try to import these into DVD Author 3 or TMPGEnc 4 XPress, both applications will freeze. Would adding support for this format be added in future? Right now, I have to use an extra tool to convert the file to an MPEG2 file that can be used.

Thanks,

Richard



Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 214 / 983 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.