I'm trying to recode a simple avi file but use a different audio source that needs to be delayed. When I choose ANY delay value the first ~10 seconds of the video is silent, then the audio kicks in. Weird thing is that the audio is not starting at the beginning of the audio clip. It is starting at the same spot it would if I had chosen a zero vaue delay. Negative delay is working though.
I am totally perplexed. Anyone have any ideas? I've tried diffent formats for the audio source too.
Thanks.

dont forget its not done per sound, its adjusted per MS millsecond.

so -10 will literally do nothing.

10 seconds i think is 100000

I can not import some avi files. Message is: error just sound no movie.
Cant i have more chance if i install more codec like K-Lite or TMPGenc use only owner codec?

You should install whatever codec your avi file uses. Use a program like GSpot to figure out the codec.

Very nice program,
I need H262 codec.
Than You.

ok well normally that would mean that the codecs installed need to be reinstalled, system cleaned for errors, rebooted.

for some reason the tmpgenc products STILL can not handle some mp3 vbr audio which it then refuses to open the audio.

so use nandub, open the original file, you want to extract the wav file only.

and then go to audio and deselect option, then video and select direct copy and save avi, this will save the avi by itself and should take less than 20 secs.

use the new video into author and then load the wav file.

ok onece again , whats the point doing a password for here to edit the user posts when the authenticaiton system doesnt work.

ok, the H262 codec is intel's mpeg2 codec and its blooming old.

which means that the codecs you have are needing to be unistalled as above, reboot and install from http://www.codecguide.com/download_kl.htm

I would tick all of the items, and then later on when you get to be more knowedgable about codecs you could easily unsiatl and reisnatll to what codecs you want.

The lastest version is announced, but it's only for English version.
The Chinese version (CHT/CHS) is still at Ver.4.6.3.267.....
I don't know why the chinese support is so slowly and unreasonable...

Reversion history:
TMPGEnc 4.0 XPress Version 4.7.3.292 - August 18, 2009
TMPGEnc 4.0 XPress Version 4.7.1.284 - April 27, 2009
TMPGEnc 4.0 XPress Version 4.6.3.268 - December 4, 2008
TMPGEnc 4.0 XPress Version 4.6.3.267 - November 19, 2008

I just installed the new WinFast PxVC1100 and software that includes the Movie Plug in for spurs engine. When I go to encode my movie it tells me that spurs engine does not function correctly. How can this be? I do have it in a PCI E X16 slot as opposed to a 1.1, should this matter? I have a brand new Asus P6Delux Version 2 motherboard Intel core i7 with 64 bit vista running. Wondering if my card is defective?

i have mine in a PCIx1 and all is working fine.

Ok, the problem has been resolved and thought I would post the solution encase anyone else has ever runs into the same issue. On the Asus P6T Deluxe Version 2 motherboard the Winfast card must be plugged into the bottom PCI Express port port. In the Bios set the PCI selector to Plug and Play On as opposed to letting the bios do it. Restart the computer and bingo! She works, and works well!

It now supports the mkv format.
http://tmpgenc.pegasys-inc.com/en/product/tmka.html

Software purchased off Amazon as new says Serial Number has expired - Video Encoder Xpress

You may have been duped. I'm betting it wasn't sold directly through Amazon, but through a seller?
You can try contacting support, but I'm not sure if you'll be able to get a working serial number since this product has been discontinued for a while now.

When i start up the programme, it verifys the license, then carrys on loading, then i get this message every time 'At address 000A1135, read error occurred against address 000A1135'

Ive tried to re install, but nothing changes.


Im on windows XP, service pack 3 too.

This has happened all of a sudden.

Any help would be good, thankyou.

Downloaded and installed the latest beta 0.6.?. Loved the previous beta. Now Vista SP2 won't run Karma - keeps complaining on DEP forced closing.
Any plans on developing a DEP friendly application?
Just venting.
Thanks.
Bob

Ok, call me a dummy. Found the problem with the DEP error and closing the video application - somehow I received an outdate codec. Don't know where, how, or why (might have been when installing this Karma app since I didn't have the problem before), but the fix is pretty simple - do an internet search for VISTA VIDEO CODECS and Shark007 has one that when installed fixes this problem.
Karma now works slick as always <g>. Thanks.
Bob

Suggestion Request:

It would be helpful if you could see which items are pictures and which ones are video, perhaps a small icon in the corner of movie files.

JD

I just redid my computer and reinstalled TMPG 4.0 Xpress. It works fine however when I start up the program Windows changes the color scheme to Windows Vista Basic when I usually have the setting on Aero. This never happened before. Any ideas as to what is causing this? Dvd Author does the same thing. TIA

yep, its your graphics driver thats faulty.

Hi - some imported mpg files are not producing any sound in the preview window. They do however play in othe TMPGenc programs like TMPGenc so I'm wondering why this is so. Any ideas? Thanks

I have some AVCHD files and want to convert to DVD MPEG2 files and burn and played on home DVD player,the source AVCHD mts file is dolby 5.1 channels，but no dolby 5.1 audio type in MPEG2 file audio setting page,does TMPGEnc support AC-3 5.1 at this time? thanks.

You can re-mux the 5.1 audio with TsMuxer http://www.videohelp.com/tools/tsMuxeR

xpress can not yet encode to 5.1 unless its encoding with natural 5.1 for some odd reason.

how ever if you have encoded the video and wish to mux the original audio then use its meg tools on the main front section.