There is a new survey on the TMPGEnc website. I think it'll be a good place to let them know what kind of features or products you'd like to see. Plus, who knows? you might win some free software.

http://tmpgenc.pegasys-inc.com/en/survey200902.html

There is a new survey on the TMPGEnc website. I think it'll be a good place to let them know what kind of features or products you'd like to see. Plus, who knows? you might win some free software.

http://tmpgenc.pegasys-inc.com/en/survey200902.html

Is it possible to use the KVCD templates I have for TMPGenc 2.5 Plus?? If so, how do I enable them, I want Xpress to produce mpg files that will fit on a CD, the one now that are produced do not seem to write properly on my WinAvi burning program, thanks

Hello, I have a verified registered licensed version 4.2.193, and downloaded the new 4.6 file. When I try to run it now, it asks me for my license, and when I enter it it says it is invalid.

How do I upgrade and keep my previous license??

You may be inputting an incorrect letter or number. Try 0 instead of O, 1 instead of I, etc.

You may also be using a different language than the license you purchased. For instance, if you bought a German license, you won't be able to use an English update.

If you continue to have problems, contact support and they should be able to look up your license number and tell you if there is a problem with it.

Hi

I have demux an Blu-Ray VC1 with tsMuxer into different files:
- one VC1 for the video VC1 1920x1020 in 23,9 fps
- two AC3 for the audio channels
- two SUP for two subtitles

In TMPGEnc Authoring 4, I want to create an BLU-RAY .
I import the source file VC1

So I user TsMuxer to create a TS file from just the video channel.
Now I can import it, add the two AC3 files and the two subtitiles (after converting in SRT with SUPrip), I can create the Menu.. the chapters.. etc

Everything is ok... until ...

I can't simulate the result ... neither output ..
I have an error :
the track xxxxxx invalid video pulldown mode ?

What does it mean ?
Why I can import, edit the video, but not output ?

Thhanks for your help anf for this great software

You may need to change the framerate of the track that is getting the error.

In the Source Stage, click on the "Settings" button for the track that has the error.
Then, click on the "Video" tab. Change the famerate to something else and see if that solves the problem.
If that doesn't work, try changing the display mode and field order as well.

Hi Vincent,

I have EXACTLY the same problem.
I have downloaded Grease which was 33Gb, and a separate Subtitles SRT file.
It connected just file.

I have version: 4.0.2.14
Everything goes OK until "Simulation". Will not run.
"Output will not run".

Everytime I get the "Invalid Pull Down" error.
I swiched to a lower bitrate like 20000 or 15000, as TKRAVE on the forum suggested to you, but nothing helps.

Maybe you solved the problem? If you did please tell me your solution.

Many thanks,

Jerry,
Netherlands

Hi

I have demux an Blu-Ray VC1 with tsMuxer into different files:
- one VC1 for the video VC1 1920x1020 in 23,9 fps
- two AC3 for the audio channels
- two SUP for two subtitles

In TMPGEnc Authoring 4, I want to create an BLU-RAY .
I import the source file VC1

So I user TsMuxer to create a TS file from just the video channel.
Now I can import it, add the two AC3 files and the two subtitiles (after converting in SRT with SUPrip), I can create the Menu.. the chapters.. etc

Everything is ok... until ...

I can't simulate the result ... neither output ..
I have an error :
the track xxxxxx invalid video pulldown mode ?

What does it mean ?
Why I can import, edit the video, but not output ?

Thhanks for your help anf for this great software

I think to import Blu-Ray VC1 into Authoring 4 is still not supported, that is why becomes error, thsi could be a request for them.
good luck

With TMPGEnc 4.0 Express, what would be the best quality settings when encoding from .vob to .mp4?

I'm a disc jockey and video jockey and don't want to use the .vob files as they eat more resources than the .mp4 files, plus I can save on hard drive space in going with .mp4. I don't want to lose much in the way of video and audio when converting however.

Starting at the first screen after loading the .vob file...I don't know what to select for "Clip settings"

Display mode: Interlace or Progressive
Field order: Top field first or Bottom field first
Aspect ratio: ?

Any help on settings is greatly appreciated.

I would not change anything in the Clip Settings unless you have to or want to force it to display differently.

The Format Stage is where you want to change your settings since these are your output settings.

Using 2 pass variable bitrate will give you the best quality, and a higher average and maximum bitrate will keep the quality high as well.

Thank you TKrave. ;-)

Is it possible to have Author 4 burn multiple copies of either a video file or an ISO file, and if so where is the setting??

Thank you

Automatically? No.

You'll have to do each burn one after the other manually. You can use the disc writing tool to load an iso or video_ts folder.

error message: insufficent memory during output process (blu-ray disc project)

i have vista x64 with sp1

8 gb memory kingstone

core 2 quad

(2x)3870x2 crossfired

Are you running other programs at the same time? How much hard drive space do you have?

I opened a support ticket for this. They came back and suggested disabling all multithread check boxes. In some cases, this worked.

In other cased, I've used Xpress 4 to convert the bluray m2ts to a BMDV mpg file then import it into Works 4 for the video source. Xpress 4 will not encode the 5.1 audio track as part of the bluray BMDV mpg. It will only create a 2 channel Dolby Digital audio track.

Then import the original m2ts file, if it only has DTS 5.1 or AC3 5.1 audio, for the audio source. Works will now create the bluray dvd without generating this error.

should be "BDMV" and not "BMDV"

Hi,
Excuse me for my English, I'm Italian...
I've many problem to install new version of TNPGEnc 4.0 XPress. I've the 4.1 version and I want to update it to 4.6 version. But when I try to do it, the installation tool say me that it's impossible to unistall the old version of program because int's impossible to find the .msi file. I try to search it in my computer... but I can's find it...
Please, can you help me?
Thanks in advance,
Maria

Have you tried using the Windows "Add or Remove Programs" control panel? Maybe you can uninstall the old version with that before installing the new version.

If you are still having problems, contact support:
http://tmpgenc.pegasys-inc.com/en/support/support.html

Please add the capability to output DivX Plus(TM) HD to Authoring Works 4

downloaded & installed TPMGenc 4 Xpress. On first attempt to start it says The Trial Period is Over, which is rediculous since it was just installed. I'm trying to run it on Vista32 sp1.