This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
Sorry if this is a really dumb Newbie type question but anyway here goes :
Im trying to merge 2 identical mpg files each around 400kb and from the same source. The result is a single mpg file of 470kb, which consists of all of the first file and only a little bit of the second one. I have no problems merging smaller files...
Also recently Ive tried to cut a piece out of a large MPEG file in order to get it down to size for a CD and exactly the same thing happened (a file of around 470kb) Im sure that I must be doing something very basic wrong - If anyone can help I would really appreciate it. Cheers !
Well there Might be some sort of error with the second file or incompatibility especially if the Mpeg files were not made by Tmpgenc, and the Merge & Cut can be pretty buggy at times..What I do when I can"t get one program to work is use a Different Program, there are other Mpeg joiners out there, like Mpeg2vcr is a Very good editor Joiner..
Actually - thinking about it - it doesnt explain why my extra-large file was also reduced in size when I tried to cut a bit out of it. I had an 800mb file and cut a bit out to get it to approx 700 - the resulting file only consisted of the first 460mb of the original.... I guess this may be due to the 'buggy' cut n paste function as well ? Any thoughts ?....
I just downloaded this i am trying to Convert a Avi File to Vcd, i chose the sorce for video and audio, and when i press start, to encode, it gives me this Error, :
Write Error code at this Address : 77f5215c of Mudal 'Ntdll' with 00000000, and it wont write, anyone know what the problome could be?
I cannot get the encoder to work. I have a nearly identical system at work and it works flawlessly. However at home I get an error that says "file is unsupported or cannot open". The file is a .avi exported from priemere 6.5 I am assuming it is a codec issue but I am not sure. Does anyone know what I should try. I have gone to the environmental settings and raised the priority of Direct Show. I am really stumpted.
I started the encoding for the AVI to Mpeg file last night and it is done. The AVI file was split into 2 parts. Since there is no Audio track I extracted the audio into wav format using virtualdub.
The first half of the AVI encoded perfectly. From beginning to end the audio matches up perfectly.
The second part the audio is skewed. I overlapped the 2 parts by 5 seconds-ish. It is strange that that 5 seconds in the first part is normal while the second part's 5 seconds is skewed.
Does anyone know why TMPGEnc does that? Is there a work-around besides manually setting the audio displacement (Which isn't very accurate)?
I dawnlodad and installed new version and ... @#$%!
This is what I think happened:
My previous registered version was installed to D: location. While installing the new version it got installed to C: location and I didn't realized that (it was really late at night). I looked at the old location (D:) for the .exe file and I could not find it so I thought something went wrong with the new installation. Then hoping to fix the problem I unzipped the old version into the old location (D:) and while try to run it I got the unregistered version and there is no way of registering it with my old key. Then I discovered (!!!) the new version on the C: drive and removed it. Then I repeated the installation process again trying to use the new or the old version however every time I get the unregistered version without a possibility to register it.
I got myself into this big mess. Can it be fixed? Please HEEELP.
Well Delete All versions of Tmpgenc on your System and Use a Registry cleaner to Clean out ALL Tmpgenc registry entries..Then Install Tmpgenc and Register it, But you still might not be able to Register the new version with your Old Reg Key..I have a Registered Version also But my Reg Number will not work on the New Version, I guess you can only update Tmpgenc so Many times...
Hi folks,
I made a few MPEGs (VCD) and it works very fine...now I want to make AVI's with TMPGEnc. My first AVI's are OK ( I used "unlock" for size/aspect ratio).
But my question is : Does anybody know a good Tutorial (eng/ger) for AVI's using TMPGEnc ??? I only found (S)VCD-Tuts via Google...
I tried to encode a DivX file into Mpeg1 for VCD. The video came out great, but there is no Audio. I played the Divx avi file file in Media Player 9.0. Does anyone know why this is so? or how to fix it?
Following the advices on this board I extracted the audio as wave using virtualdub. When I opened the avi file it gave me this message
"VirtualDub has detected an improper VBR audio encoding in the source AVI file and will rewrite the audio header with standard CBR values during processing for better compatibility."
Is this why TMPGEnc can't encode the audio from just the AVI file?
Well I extracted the wav file. And used the TMPGEnc to encode it into mpeg file. Since the avi file is too big to fit on 1 disk, I had to split it into 2 mpeg files.
The first mpeg file worked fine. The 2nd one has a audio track that seems delayed for a second or so. I noticed that in VirtualDub if I select the wave file as the audio track and play it, it will only work properly when I start from the very beginning. If I start at any frame beyond that I get the same audio track delay. I even re-encoded the avi file as a new AVI but with the wav file as the sound source. It still has the same error as before.
Is there a program out there that can fix this? so that if I cut the AVI into 2 MPG files, the second file will work properly?
Well don"t Split the AVI into 2 Parts before encodeing it, split the Mpeg in Parts after you have encoded it, Cuz it seems that the Sync Problem is being introduced in Virtual Dub...
I tried to encode a DivX file into Mpeg1 for VCD. The video came out great, but there is no Audio. I played the Divx avi file file in Media Player 9.0. Does anyone know why this is so? or how to fix it?
You should have at least looked for your Answer before posting Because this Question is asked and answered Many Times a Day, you need to extract the audio to Wav Format with Something like "Virtual dub_Mpeg2_AC3" then use the Wav file as the audio source..The audio in DivX files is Usually AC3 or VBR MP3 and Tmpgenc does not support these Formats as an audio source...
Just loaded new 30 day trial version and attempted to encode a mpeg2 file but when I got to encode step I received notice that "MPEG-2 trial period has expired". Now what am I to do, I haven't even got the opportunity to evaluate the product to see if I like??????
You will Only get this message if you have used Tmpgenc at some point in the Past, even if you just downloaded it and Ran the program once then deleted it you will get the Message..You only get one Chance and this is it....
I extract the audio of my avi with VirtualDub Mpeg.
But, is it best to encode only the avi video to MPEG and then mux it with the audio, or use the wav as the audio source during the encoding process.
I have tried to research this on previous BBS responses, but I am still not clear.
I keep downloading and trying other encoding software but keep coming back to TMPGEnc, this software is GREAT !
I usually Use a Seperate Encoder to encode the audio then Mux the audio with the Mpeg video But that Is just me it"s Probably more convienient and easier to Encode the wav file with the AVI video in Tmpgenc to mpeg..There other Good encoders like Procoder ,CCE and MainConcept But tmpgenc is definately one of the easiest to use and Least expensive....
How's it going? I've recently received through snail mail a invitation to attend a 2003 'AVID' presentation in New York. Have you guys ever heard of AVID. They are purporting a new solution called AVID DNA.
The price of their products made my palms sweat. I'm interested in hearing what you guys have to say about AVID if you have any experience with them and their products.
Well I have "AVID Express DV 3.5" and it is a Good DV editor with a Lot of Features, and AVID is Used Quite a Lot in Profecinal Editing Studios, But there is no Major advantage useing AVID as opposed to something Like "Adobe Premier 6.5" or "Pinnacle Editing DV 4.5" or even "Vegas Video 4" accept for a Few Bells and Whistles,and they are Quite Pricey to say the least but isn"t all software these Days?? anyways I"m sure that the presentation will Be Quite interesting ,and you never know you might meet some studio Big wigs there..I actually Got invited to a Ulead Video editing Workshop in L.A in a Couple Months But it is much too Far away to go for me...Anyways I"m sure it will be interesting..Have Fun....
Thanks for the input. I was wondering if it was something spectacular. Maybe I'll attend if nothing else comes up. Its only 15mins away for my pad and the 'free' executive lunch is always a welcome perk.
OK, as someone who spent just $48 for my MPEG encoder and $179 for my editor (Ulead MSP Director's Cut), I can't help putting in 2 cents here.
AVID products are skewed toward volume production environments. They charge a premium for speed, high reliability, expert user interface, and effects that are only needed for shows like "Bluetorch TV" on ESPN2. If you are not under deadline to crank out a daily production like that, you might get away a lot cheaper.
And their DV tag screams 4:1:1 to me. It would be very limiting if their $1000 (!) "AVID Express DV 3.5" product is hardwired to a 4:1:1 DV codec. That rules out working with high resolution analog source and makes croma keying difficult.
I actually have No Problem Useing AVID DV 3.5 for Editing Captured Files, Usually Raw YUY2,or HuffyUV...I also ame the Proud owner of Ulead Media Studio Pro 7, and Find it a Really Good Program with a Lot of Improvements over the 6.5 version, I think this is why I got invited to that Workshop in L.A Cuz I have Registered Allmost Every Product that Ulead has ever Put out and Only Special repeat Coustomers get invited...