This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
I created a highlight basketball film and it looks great except for the titles which seem to block fade or stutter. They arent smooth and there are beeps in the audio. If I put a little video behind it they seem to work fine but i am unable to have a black or transparent background with white titles fade nicely like they do on the computer. When I watch the mpeg2 file on my computer it seems to play ok, but when I put onto a DVD using DVDit 2.5 PE it doesnt work correctly. At first I thought it was DVDit but I then encoded the same video in Cleaner 5 (which is terrible) the titles played fine. They faded nicely with no beeps. I hope this helps find the root of a problem.
Thanks, Alex
I converted DIVX movies to two VCD discs. When making the MPEG files for VCD I use Visualdub for the sound. I use the template for PAL VCD that comes with TMPG, but when I playback the movie it does not move smooth. It looks good, but when you get a scrolling picture (like arial view) you see that after maybe 1 or 2 seconds the moving stops for a very short period. First I thought I have to burn the VCD (with Nero) on lower speeds, so I burned one movie at 1x. Still no better movement.
Sounds like you have encoded it to a Different Frame rate than the source file..Your Mpeg file has to have the same frame rate as the source AVI file...
Im kinda a newbie here and i hope some of you guys can help me..
I normally use Pinnacle's Fast Silver editing tool.. but id like to try to make a dvd for a change.. I can output a M2V file from my Fast Studio software.. i also get two .wav's with left/right audio channels..
How do i get from here to having a DVD file that i can burn?!
When i use the Wizard it says that M2V isn't supportet.. could this be true?
An m2v file is an MPEG2 stream without audio. As long as it is in the correct format, such as framesize and framerate and GOP size you may be able import it directly into DVD authoring software. http://www.digital-digest.com/dvd/downloads/authoring.html
Still trying to find out why some DVD's vobs cause buffer underflow.
Dr. M reports following about the vob, which multipelxing with Tmpgenc results 200.000 s packets buffer underflow:
Can anyone tell the meaning of it? (below)
Looks like there is only bitrate changed compared to old ... but what is old? "Old" must be something inside vob as there is no ifo or other files.
Examination for W:ess_1_5.vob (Extract only as it's a repeative error)
=====================================================
Looking for missing or duplicate frames
and for incorrect GOP and sequence headers.
Verifying timestamping and TimeCode values in GOPs.
Checking that the mux rate and bit rate are within 10%
of claimed mux rate and bit rate respectively.
Looking for non-mpeg bytes before the first startcode
and after the last startcode.
Verifying that the MPEG starts with a Sequence Start,
and ends with a Sequence end.
===
* Stack size limit reached on error stack.
* Video Sequence parameters changed @ 1171492.
(Old: 0- -1 : 0 SEQ 720 x 480 (interlaced)
dsp asp ratio= 3/4 (720*540)
frame rate = 29.970 frames/s
bit rate = 3254800 b/s
min buf size = 229376 bytes
constrained = false
IQ matrix = false
non-IQ matrix = 16 17 17 18 18 18 19 19
19 19 20 20 20 20 20 21
21 21 21 21 21 22 22 22
22 22 22 22 23 23 23 23
23 23 23 23 24 24 24 25
24 24 24 25 26 26 26 26
25 27 27 27 27 27 28 28
28 28 30 30 30 31 31 33
help
ive just used the programme to convert a divx file to a mpeg however once it was done there was a few seconds of sound but then it stopped and there was no sound throughout the rest. whats wrong????????
Extract the sound into .wav file with VirtualDub, make sure that your newly created .wav file has sound (ie, doesn't suddenly disappear) and try again by selecting it as source audio.
I download loads of films using Kazaa. I wanted to put these in VCD or SVCD format so as to free up my Hard Drive. When I use TMPG Enc I am using the same source *.avi file for both video and audio. I get great quality video encoded in bout 4hrs but there's no sound. Do I need to extract the sound from the *.avi file first and when I choose my source video and audio file make the *.avi file the video source and the *.? file the audio source.
Quite a few of the divx films on kazaa have mp3 variable bitrate audio.
TMPGenc only supports constant bitrate try using virtualdub to extract the audio to a pcm uncompressed wave file then select the wave file in tmpgenc.
I just downloaded TMPGEnc v2.59 and unzipped the file. First question: why is there no install/setup file? I then tried running TMPGEnc.exe. It runs,but after specifying my input and output files and trying to proceed, I got the following error message: Can't load "P3Package.dll"
TMPGENC Is a Standalone application so there is In Installer..But you have to extract ALL of the Files in the Zip File in the same folder..You odviously don"t have them in the same folder or you wouldn"t be getting the P3P Package error...
I download loads of films using Kazaa. I wanted to put these in VCD or SVCD format so as to free up my Hard Drive. When I use TMPG Enc I am using the same source *.avi file for both video and audio. I get great quality video encoded in bout 4hrs but there's no sound. Do I need to extract the sound from the *.avi file first and when I choose my source video and audio file make the *.avi file the video source and the *.? file the audio source.
Are they divx avis with vbr mp3 audio ? I had same problem and if you open avi in Virtualdub then extract audio to wav, then use that as audio source in encoder it should be ok . To check, go into Source range, then tick Display Audio and yuo should see audio waveform.
ps. you could also use virtualdub to frameserve to encoder.
No sound is not only caused by mp3 VBR by AC# sound,too.
Open your file in VirtualDub, go to file menue. Through that access the file information and see the sampling rate. If it tells you 48000, then you have to go to audio menu, select full processing mode (this one you have to do no matter what), then audio/conversion, change sampling rate to 44100, precision to 16 bit.
You will get a decent output which will be supported by TMPGEnc.