Hi all,

i would like to know if it is possible to create with tmpge a SVCD with an audio track DD 5.1.
Thanks to all,
Bye

Gabry

No, Dolby Prologic yes.

ASHY

You can do MPEG 5.1 audio, but it's hardly supported anyway.

As far as I'm aware MPEG 5.1 is Ac3 or Dolby digital 5.1 which is not supported in SVCD.

ASHY

Hi all,

I am having some problems and ask you for your help there:

Situation:
I have a avi file (divx) that is around 700MB large. I want to get this to MPEG-2 to then prepare it with DVDWorkshop for DVD-R.

Now: I start the process with TMPGEnc with different settings like CQ etc. and expect a filesize of around 9GB (that is fine).

But: when I come to a point in the conversion process after 8 hours or so I get an error wnd the whole thing stops. What I recognize is that the filesize that is reeached until that point is 4096 MB. So I wonder if it has to do with the filesize and if I have to tell somebody somewhere to accept a larger size - but how?

Or: can I automaically splitt the file if it comes to a "too large" point?

If not: is there a very good tool to splitt the avi file before? (except AVIchop -> tried, but after splitting I do not hear anything anymore - maybe there is a solution for this one).

Thanks in advance

4096MB is the "Fat32" File size limit, the only way for you to get a file bigger is for you to Format you hard drive to NTSF format, and only certain Operateing systems have this capability, like Win XP and Win NT,You can use the "source range" in the "Advanced settings" to encode the movie in two parts..Your Divx file must be really really long, you should be able to fit 2-3 hours of high quality DVD on a 4.7gb DVD-R..How high do you have the bitrate set?? If you used the CQ method you can get a much smaller file size without wasteing all the bits that the CBR method does, and not loose quality...

Thanks for your support.

Well, I use Win XP Pro and, I checked again, the partion is NTFS. So, don't know what to do.

The Bitrate is set to a max 3000.The CQ Quality is set to 65% is it too high?

And just now I try the source range - I selcted just up to 50000 frames and started and - funny - I get an error saying 47983088 47983088 - I did not search the board, but maybe you know it and have a word or two for me, pls.

Thanks

Still not working.

Now I have splitt the file using source range option. After done the first part I just tried to play it - video is ok, but no audio, even if the file consists it.

What now?

maybe you can export your audio as a separate file.
so you will have 3 files - video part1 video part 2 and audio [all]

try that.

Finally , I have done it :-)

Just to thank all you helped me with this. I did the following:

I took my DivX Avi file and opened it with VirtualDub - this sw recognized a wrong header or something.

With Virtual Dub I just saved the avi file as new avi file with the settings for Video -> direct stream copy and for Audio -> direct stream copy. Then I saved it.

After I opened with TMPGEnc and tried just the beginning of a stream ... well, now I have audio, too. Great!

And, I also had another problem in the beginning, that the filesize may only be 4 GB - I now recognized that before the estimated time was around 18-19 hours. And now, after all this work, it is just only 6-7 hours estimation. With this fact I guess and believe that I can now run it in one file through. I am right now testing it.

Have fun :-)

Is it at all possible that one can burn a VCD to play on a player that doesnt support it. Bear with me, maybe its just the drugs talking, but seriously, the players alwys look for a vob file right? what if you removed the ac-3 audio, took out the subtitles, other languages etc, and just took the plain stereo and video .vob files, palced them in the correct architecture for a cd, but made sure the image was no larger than 700MB. Couldn't one acheive VCD playing for a non-supportive player?? granted it would still be substandard, but still......... a solution for those of use who bought cheap players and neglected to look for vcd compatibility. The only requirement is that the thing must be able to play cd-rs. Now will those who are more advanced in this topic please proceed to rip apart and urinate on my theory...

Nope you are out of luck, Vcd is in Mpeg1 format so a VCD compatible DVD player has a special chip in is which allows it to read mpeg1 format, pluss the bitrate of a VCD is probably to low for the dvd player to read properly with out the chip..DVD player that play VCD/SVCD are totally cheap, some of the cheapest DVD players are the most compatible players..The one I have was $99 canadian and it plays everything that i throw at it and there are cheaper ones......

when I convert to mpeg2 / DVD the picture is very grainy and streaky. not very good quality.

Whats up with this?

Sounds like you are seeing "Interlace lines", try useing the deinterlace filter....

Hi i want to change a movie wich is .avi to vcd format i can play oit in my computer , but when i try to encode it tells me that the format is unsupported what can i do ??

You need to raise the "Direct Show File Reader"...Go to "options" to "enviromental settings" to "vfapi plugins" and raise the "direct show" to "2"...

hey,

i also have the same problem. i recently upgraded my OS from '98 to XP pro. when i had '98, i downloaded a lot of files from kazaa .avi form and converted those files to .mpg so i can burn them .vcd. didn't have any problems with the process at all. now that i'm using XP and download .avi files from kazaa, TMPGEnc says it can't open or it's unsupported. this just happens with the video, i can load the audio from the .avi file just fine.

i also tried to change the direct show in the Vfapi plugins to "2", but the error still comes up. is there anything else i should do?

I had converted a avi file to mpeg file and then cut into a VCD using a PAnasonic CD - R/RW. There was noise disturbance when i was viewing the VCD. How can i reduce it.

Thanks.

- What is the quality of your source avi like ? noisy ?
- What bitrate are you using ?

I have a downloaded version of TMPG which is a 30 day version. I was given to believe that its a free software. Is there a free copy available.
Can you recommend me free encoding softwares which can convert avi to mpg

Cheers ! !

Tmpgenc is free for doing VCD"s it is just the mpeg 2 function that runs out in 30 days, there are free mpeg encoders but they are really slow like 3 times as slow as tmpgenc so it might take a week to encode a movie and the quality isn"t nearly as good as tmpgenc.....

Hi ! ! !

Just started using the TMPG software for conversion of avi files to vcd compatible mpeg format.
I converted a 150 MB file (avi to mpeg) and it got converted but the file size became 600MB. I think there is some wrong setting i have done which needs to be corrected.
Also can you recommend me any other conversion softwares. TMPG simply takes too long to encode.Please help.
Thanks.

get a faster computer, enable multithreading and pipelining, under environment settings... and TMPG is free, just the MPEG-2 (DVD format) isn't after 30 days.... read the notices more carefully


and don't say cheers, we might mistake you for a pink princess

There is nothing wrong ,Tmpgenc and any encoder does not care how big your avi file is, cuz the size of the avi file has nothing to do with the size of the mpeg file, what matters is the length of the avi file and the bitrate used, generally speaking if you are dong VCD then every minute of avi is 10mb of mpeg, with svcd it is about 20mb per minute and with DVD it is about 40mb per minute..As for finding a faster encoder you would have more luck finding a faster computer, at least it would be cheaper, the only encoder that will give you quality as good as tmpgenc with faster encodeing speed starts at about $800 and goes up to $2000 and none of them have the options than Tmpgenc has...

>get a faster computer, enable multithreading and pipelining, under environment settings... and TMPG is free, just the MPEG-2 (DVD format) isn't after 30 days.... read the notices more carefully
>
>
>and don't say cheers, we might mistake you for a pink princess
>
>
>
Please find my reply in CAPS..

THANKS FR THE PROMPT REPLY.. AND ALSO YOUR ADVISE..

In a previous post, I was having problems getting VCDEasy to import chapters from the DvD using Chapter X Tractor program. VCDEasy said there was only one chapter point available.I was making my first SVCD of Lord of the Rings on 3 80 minute CD's. The copies worked great and looked great, but I had no chapters.

The solution was to increase the bitrate to 2520. So in my SVCD setup when encoding, I selected "Constant Quality (CQ)" for the rate control mode, with a quality setting of 75, max bitrate 2520, min bitrate 0. So I was able to fit the 3 hour movie on 3 CD's of one hour each with a file size of 750 MB.

weird, chapter x tractor has nothing to do with encoding bitrates it only scans the dvd ifo file for the chapter info and with copy&paste you can read them into VCDeasy.
i have 1800 kbps VBR video files that i chaptered with the use of chapter x-tractor.
Must be something else you did wrong the first time.

im trying to convert some anime episodes from avi (divx 3.11) to svcd to play on my dvd player. i burned a couple of eps and they worked fine but i have problems with one ep. the avi plays good and i encode it using the same template i used with the other eps but after its done and it says 100% completed the TMPGEng program crashes and stops responding. Anyway since it said its completed i tried to load it into nero but it said "stream encoding which is invalid for a [super] video-CD". btw, the mpg created works in powerdvd.

any clues on how to fix the problem?

Tmpgenc probably crashed before it had a chance to wright the "sequence end code" on the svcd header, this is a bug in the 2.57 version but it can be corrected but you will have to use a different version of tmpgenc or you can burn it with VCDEasy cuz VCDEasy does not rely on the header to make it svcd compliant..but how you fix it is get a different version of tmpgenc and load the file into the "Merge & Cut" in the mpeg tools, then choose "Mpeg2/SVCD" from the drop down menu, choose your output directory and then click "run" then it will make a copy of your file and attach the proper svcd header...

hey thanx alot, it worked and it was quick and easy :)

where can i download the ulead dvd plugin, ive looked everywhere can someone give me the exact site ASAP please thank you

You can get it on Kazaa, you can only work it if you have either "ulead Video studio" or "media studio".....

I am trying to make a VCD with an MPEG2 file using the header trick in TMPGEnc 2.57, but everytime I try the audio is about 8 seconds out of sync and changes periodically. I ripped and encoded using DVD2SVCD with CCE. Any help is appreciated.

I the audio sample rate 48KHz by chance? or a different bitrate than 224 kbps?
if either of that is the case reencode the audio to stereo 44100 Hz 224 kbps.
procedure: demux the video, reencode the audio and mux them again.
also problems might occur if the mpeg2 video is vbr.
Due to the set CBR bitrate of vcd that might cause synx problems too