This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
Turned out you have to pull out the audio first, then encode to mpeg using the divx file as the video source and the audio file you created as the audio source...
Hi again, Thanks to Minion I was able to fix my prior problem with the error message, but now the VCD won't work in my DVD player. I know that my player plays VCDs, I have before, but when I insert this one in it says it can not read the disc. I am using Nero, for the first time, a burning software. I have used Adaptec Easy CD Creator before, and the VCD it produced worked fine in my DVD player. Anyone have any answers, please let me know. Thanks, Emily
I don"t see why It wouldn"t play if it was burned properly unless your dvd/vcd player is really picky and the mpeg was out of compliance, I guess you can try the other burning software and see if that is were the problem is....
Also check www.vcdhelp.com - DVD players list to see what brand of CD are compatible with your player ... not all brands work on certain players ... mine (Sony DAVS300) is very picky for instance and only plays 5 or 6 different brands .. fortunately for me one of them is a cheapy one from Argos 100 for 30 quid
Hi, When I try to split a file under 'Source Range' in TMPGEnc, I can enter the starting and ending frames I am wanting to encode, and in the bitrate section I am entering CD-R 80 minite(VCD/SVCD), then I specify the file name and OK to create a new file in that name, but when it goes to the transfer screen an error message comes up as 'Can't load "P3Package.dll"'. Please, does anyone know what I am doing wrong. Thanks, Emily
Recently I have recorded some live piano music with my camcorder. Then I noticed that after encoding with TmpgEnc the sound was very thin and distorted (as if it is too loud). The problem is only in the mpg-file as the sound of the AVI-file is good. I followed the advice on this board and used SCMPX and TOOLAME as external encoders in TmpgEnc. But TOOLAME gave no improvement and SCMPX resulted in a sort of beeps and no clear sound. I reduced the audio volume via normalizing to 50% but no improvement. I left the sample rate at 48 kHz (instead of 44 kHz), only a very small improvement. I tried 128 and 224 kbps: no difference.
What have I done wrong? Do you need to setup these external encoders with some input data and how do you do that? Is it necessary to split up the video and audio first?
I'm having the same trouble with piano. Very nice recording until I go through TMPG to VCD. Noticable ringing/buzzing in the audio after encoding. Same experimenting with normalizing, etc. Also tried drastically reducing the level of the audio before going into TMPG: no improvement. I don't know what to do.
Follow-up. I found the solution for my problem: I needed to switch my input audio sample rate to 44.1K which is the sample rate of the VCD format, rather than 48K which was the default for my other software. Sounds OK now.
Can anyone help, when I split a file and output it to MPG, it plays perfectly wll until about halfway through the file, then the sound goes off? Is this a usual problem? My PC has a Pentium III processor running at 800Mhz with 256 Mb of RAM.
i have an identical problem, please let me know how you fixed it?!
i have a P3 800 mhz fast all around.
I got a SVCD and tried editing it and when i cut it and listen to the output file, the movie plays fine but the last 10 mins or less the audio cuts out
Has anyone successfully converted mov files to mpeg with tmpg? There is a plugin on the web, but I couldn't get it to work--something about module error.
I have used the DVD2SVCD and TMPGEnc programs to convert file to VCD. When I play the newly created VCD (using Nero software) on my player, the screen seem to shrink from right to left (about 1/3 to half). What have gone wrong? How to rectify this problem?
I have never used dvd2svcd. However, I had some problems burning vcd's with Nero a while back. Since then, I have been using vcdeasy, which I personally think is the best program for burning vcds or creating vcd images. It's a free program too. Get it here: www.vcdeasy.org. TMPG files work fine in it. Hope that helps.
How do I make my own custom templates. I have a dvd player that will not play minidvd's. It thinks it's a "vcd," and then it goes to a bluescreen. I've found the problem--the audio. I need to create a dvd template that does not use sound greater than 324. I can open mcf templates in worpad, however I cannot save them in the mcf format. What program allows me to edit mcf files?
If You just want to make a template so you don"t have to keep doing all the settings every single time you load a file in well that is easy you first load the "unlock.mcf" template, then adjust the settings to the settings you want the template to have then click the "Save" button in the bottom right corner, then you just name the template and save it and thats it......
Well what"s the problem??You got to make 3 files one 720 by 480 one 176 by 112 and one 96 by 64,Then put them in the Jacket-P Folder,What kind of files are you encodeing?What"s not working?I don"t know much about dvd-rom but Tmpgenc shouldn"t have a problem encodeing to those resolutions..
everybody say that amd is good in games blabla and intel is good for ripping ectect im here now to ask you professionals what is faster a amd or a intel for people that convert movies ......
I think for encodeing with Tmpgenc that a Pentium is a bit faster than an AMD because tmpgenc is optimized for Pentium processors with MMX,SSE and SSE-2 but then again AMD"s are optimized with SSE and 3D-Now which is supported in tmpgenc,So I think that any advantage either way is negligable accept that more programs are optimized for Pentium"s than AMD"s like dvd2avi which is optimized for MMX like a lot of programs are, but if you want to get the most performance for less money than maybe check into a Intel Celeron they can be up to half the price as Pentiums with compareable speeds and they have the same MMX,SSE and SSE-2 optimizations..You can download Benchmark programs that tell you how certain processors stack up against each other in many different catagories and you can see how the processor in your computer compares to other proscessors...
Sorry, with tmpgenc, there is a preview option while you're merging the wav and the avi to mpeg. My problem was that there was no sound in the preview, however, I burned onto a CD and played it in the dvd player and all was fine, there was video and sound. I guess I was just impatient. Thank you.
I'm completely new to trying to convert .avi to mpegs. The first time was a total waste of time. The second time I downloaded a whole slew of things and installed what I was instructed to on the guide....
I transformed part of the .avi to .wav format as was instructed and I played it...it worked. The video works too, however, when I use the preview option, the film plays and there is no sound. What do I do? Where did I go wrong? There have been no errors that popped up.
What do you mean by "when I use the preview option, the film plays and there is no sound." what preview option are you talking about?The only preview option I know of in tmpgenc is while you are encodeing and it doesn"t play audio while in the tmpgenc preview window while encodeing,But if you mean that you are just playing your mpeg file after you have finnished encodeing it and it has no audio then the problem could be from a few things but not knowing what steps you went through to make the mpeg so I couldn"t tell you what you did wrong but I can tell you how to fix the audio in the file, what you can do is first take the wav file that you said you made earlier and first listen to it and make sure there is audio in the file, then load the wav file into tmpgenc and leave the video blank, the make sure the "audio only" is checked in the stream settings then do your audio settings make sure the audio is 41.000hz then encode it , now you have to go to the "mpeg tools" to the "simple de-multiplex" and load your mpeg file into it and then click "run" it will split your mpeg file into the video and audio you can get rid of the audio from that file cuz it is blank, now go to "simple multiplex" and load the mpeg video file in and the mpeg audio file you made from the wav then choose the right setting from the drop down menu (mpeg1/vcd,mpeg2/svcd ect) choose your output file and click "run" now you will have a mpeg file with audio and video...Give it a try it works I just had to do it with 3 files I encoded last night....
I know what you're talking about. Correct me if I'm wrong, but you mean when you click "File > Preview...", you don't hear any audio, right? Well I think it's ok, because I don't hear any either, and neither does a friend of mine who uses TMPGenc. So I think you're ok!
One thing I shall try is to REBOOT after running WinDVD to see if the display card is reset. I gather from your comments that the display card is switched to overlay mode and TMPGEnc needs non overlay mode.
I'll report back.
I wonder also whether the make of the display card is involved with other manufacturer cards not affected.