Hi there, i am from Germany

i downloaded an avi which is stuttering on my DVD.
Actually it is allready stuttering in avi format.

Is the reason for that that it is in NTSC mode??
Can i change it to PAL, how are the Rates for this???

Thx in advance!!

when useing the merge and cut function,I am getting the message "stream writing error" half way through the process.Any ideas what this problem is?

The file you are using maybe have corrupted frames.

:)

Techno

I am having the same problem when I try cutting an mpeg. Is there anything at all that can be done to avoid the error??

I have 4 SVCD's each filling a complete 80 min CD-R.

My DVD-player seems only to be capable of playing 74 min CD's, so I want to split join the movies.
When using the merge&cut utility I have some problem with the audio:
1) When taking the first 40 minutes (out of 45 minutes) from part 1 the last 30 seconds of the created SVCD contain no audio;
2) When merging the last 5 minutes from part 1 with the first 35 minutes from part 2 the first 5 minutes of audio are good, after this point the audio is out of sync.

Does anyone have a clue, or is there another way to do this?

Can anyone help.

I am trying to encode an AVI which has been created with the Divx codec, to a VCD MPEg.

The picture works fine but there is no sound.
I have the avi set as the audio source, I have checked the version of the DIVX codec that the AVi was encoded in and I have them all installed, yet still no sound.

can anyone help?

thanks

load the avi in virtual dub and save it as wav.

load the wav and video in TMPGENc and encode.

This should work

Techno

The reason for this is that the avi reader built into TMPGEnc, which is given top priority on the list of readers, doesn't know how to get MP3 audio out of a DIVX file.

To fix this, unselect it. In the environmental settings area, under VFAPI plugin. The one you WANT it to use is the directshow filter.

- Gurm

i could kiss you!! It realy works.This problem had cost me some nights (and some discusion with my girlfriend).I just changed the priority settings by clicking on the right mouse bottem.
Thank you!

Hi all,
I have a couple of mpeg's which i would like to cut a bit and join to fit on one cd. When opening the file(s) with TMPEnc's mpegtools-merge&cut or just plain in TMPEnc in video source i get the error message "Illegal MPEG video stream".
I can watch the file fine and burn it perfectly with nero, but TMPEnc, vcdimager, virtualdub all give me error messages. Any idea how i can convert the file to something i can open with TMPEnc to cut/join it etc...

Thanks

AutoBaud

Hi, i have the same problem as yours, i have posted the same topic today, let's hope that someone can solve this problem. if i know something i'll post it 4 you. good luck

I have win2K and when I try to trim the beginning of my MPG2 file to get out 37 seconds of VCR tracking the program starts it and then finished it up but its only 137mbs and the original was 3.4gigs....I played it back the cut played perfectly where I wanted it to but the file was drastacly shortend. Its not even a minuite of the film. What could I do to correct this.
My system specs are:
Intel P3-1ghz
768mb pc133 ram
40 gig hd just for video files
20 gig for operating system
Page file set to 6000

ANy help?

Hello I posted a thread earlier about a samller size file and some of the replies said to put the file on 2 cd's I do not understand how that will work, does it mean I will have half the movie on one cd and the other half on the second cd. if someone could help clarify this up I would appreciate it.



Thanks,
Matt Nichols

yep, that is what it means! :)

if your movie is less than 80 mins but file size is big, you can still burn this in nero as nero used timescale

Techno

sorry, uses timescale

Techno

No it F....ing doesn't for the last f....king time u little p...k!!!!!!!!!!!

This may have already been posted to this BBS, but it seems worth reposting. My Sony NS400 supposedy only plays VCD's, and not SVCD's, but a method posted over at vcdhelp.com allows my player to play SVCD's and it appears to work on other players as well. The process is to perform a simple multiplex in TMPGEnc on the SVCD file and convert the file headers to VCD. Bottom line is that the DVD player thinks it's playing a VCD, but the actual data is SVCD which the player automatically decodes since it's MPEG2 compliant. It's an easy fix to play SVCDs in your VCD-only DVD player and doesn't require long conversions from MPEG2 to MPEG1 (the simple multiplex takes about 5-10 minutes), plus you get the added bonus of the increased quality of MPEG2 and VBR. Here's more specific instructions on how to perform the conversion from vcdhelp.com that I've slightly editted based on experience:

-dooger

--

Start TMPGEnc

1 Cancel wizard and immediately select FILE -> MPEG tools.
2 Select 'simple multiplex'
3 Video input 'YOUR MPEG FILE' - browse to the SVCD file.
4 Output 'DESTINATION FOR YOUR FINISHED FILE', rename for converted file.
5 Select type 'MPEG-1 Video-CD' (very important, will default to MPEG2)
6 Hit Run.

This may take anywhere from 3 - 7 minutes depending on your system. Highly suggest having ALL other programs closed, and don't do anything with your computer.

Note: Prior to "Run", ensure the select type option is 'MPEG-1 Video-CD', it will default to MPEG2 after browsing to the SVCD file.

Burning:

Start NERO (tested with version 5.4.4.0), use template Video-cd, add file(s) and then burn. After adding the file, it may fail the VCD 2.0 compliance check and you will need to disable the compliance and proceed anyway.

Not gaurenteed to work on any players. Not gaurenteed at all. I don't know if this can cause any damage to your DVD player, but I don't see how it could.

My guess is, all "newer" DVD players, even if they don't support SVCD files, actually have the capability to decode the SVCD MPG files, but, manufacturers are probably lazy to enable the option due to cost and time. Either that, or they fear the SVCD.

nice 1, thanks for that but you are making a SVCD to a VCD are you not?

Techno

Nope, only the file headers change to VCD, core data remains MPEG2. That's why the conversion only takes about 5 minutes for a 750MB SVCD file.

ok, thanks for clearing that up! :)

Techno

If SCVD can be disguised as VCD just through simple multiplexing, what about appling time scale buring trick of VCD to SVCD on Nero?

If Nero can burn 80 min SVCD into one CD, isn't it great?

Any comment Techno?

Kisoo

yes, it would be great! But I dont do SVCD's, but the information dooger gave us is really good, handy to know! :)

Techno

Kisoo,

I guess I don't understand your question (I'm pretty new to VCD/SVCD). What is the "time scale burning trick of VCD" you refer to?

- dooger

Ignore it mate. It was just some pathetic suggestion by an otherwise idiotic person called Techno who thinks you can burn 3gb on to an 800mB cd as long as the time of file runs less than the time in minutes on the Cdr.
I'm sure if you have any intelligence you will just laugh and forget all about it.


ASHY

looking for a newbie guide to make svcds, a website or if anyone has the time, that would be great!

it is really easy to make SVCD's. Follow the wizard!

Download TMPGENC v2.53

open it, a wizard will appear.

select SVCD (pal or ntsc)

follow the wizard and drag and drop or browse to the directory you wish to select your file that you want to convert to SVCD.

It will then encode.

It is as simple as that!

:)

Techno

Good places to start is here

http://www.vcdhelp.com
http://doom9.net

I like the guides that purpleman has, there is a link on the doom9.net site.

:)

What am I doing wrong?
Takes about 3.5 hours (1 hour movie) to go from vob to mpg, seems way to long in this computer world. Do not under stand all of this but I'm trying...
Equipment:
Win XP Pro
AMD T-Bird 900
1 gig ram
Pny NVIDIA GeForce 2 MX/MX2 400 64 meg
Plenty of HD and defraged
All Drivers and updates up to date
Procedure:
Smart Ripper 241 (few minutes)vob files...
DVD2AVI 176 (few minutes) wav file...
TMPGEnc 2.53.35.130 (3.5 hours) mpg file...
Then of course Nero to burn to VCD...

Thanks in advance for any and all help...
Please don't assume that I know more than I do...
Bill

No, you ARE NOT suppose to convert vob's directly to MPEG using TMPGENC, this is why it is taking long! :)

Convert the VOB's to something else, like avi.

You can convert this using DVDx or other software, then load it in TMPGENC and encode.

You should load the DVD2avi project in TMPGENC and make sure you have the plugin installed.

:)

Techno

Also for copyright issues! :)

Techno

Still looking for download location for DVDx English.
Any help???
Do I still need to do Smart rip, then create the wav file?
Bill

yeh, u need to use smartripper.

http://www.digital-digest.com/dvd/downloads/dvdx.html

Techno

you need smartripper to rip the DVD!

make sure you tell it to create an index file and and ifo file

then load in DVDx

Techno

an hour of mpeg from avi. is probably going to take at least 3 hours it takes 12 hours on my system which is a 800mhz p3 512mbram 100gb hd......

Hmm there is a problem here, it's not a problem converting VOB to mpg but if you use uncompressed input data for tmpgenc the encoding is twice ad fast.

Like a uncompressed wav file and avi file but there is another problem here, it takes up a hole lot of space on your hardrive.

Other than that you have to wait for the time it takes ehe ;)

I only have a 400mhz computer but have not put together some spare parts so I have a 500mhz server. ANd I don't care how long it takes any more, only that it gets done :)

MPEG uses compression there fore TMPGENC has to scan the frames to encode, which takes a while because of compression.

When it is NO RECOMPRESSION or uncompressed AVI, it will encode faster because fo no compression

uncompressed avi is larger than NO RECOMPRESSION (when capturing) so NO RECOMPRESSION is better because it is lower in size and same, if not better, quality. :)

Techno

It's clear that a manual is needed for Tmpgenc for sure since a lot of questions involve stuff that you could read in a manual.

I heard that there will be manual for "TMPGEnc Plus" in near future, but I
do not know for free version.

I capture MPEG2 file for 2hrs, about 6GB, under MPEG Tools/Merge & Cut need more than 30mins to complete. (P4 1.6A / 256MB RAM / ATA100 HDD) Is that normal?

Faster CPU shorten the encode time, will more RAM help? What difference between 256MB and 512MB of RAM for Merge & Cut and encoding?

Eh more ram probably won't do any difference.

Eh 30min, that's fast, for me it would take hours, since im on a 400mhz but I got a 500mhz server now so I don't care how long it takes, since my server is on 24/7 :)

yeh, the RAM is not really effected. If you have a fast CPU and motherboard then this is the fastest you can do.

Make sure you are not running in background apps or using the PC while encoding.

Techno

Tks... but I mean "Merge & Cut need more than 30mins to complete" with my new P4 1.6A. Any other user use more than 5GB of file in Merge & Cut?

DV/AVI is bigger than MPEG2, 1hr of MPEG2 is about 3GB, 1 hr of DV/AVI is about 12GB. So DV/AVI will take longer time right?