I use Studio 7 to edit and encode to AVI. Then, using TMPGEnc, I encode to MPEG2, then burn to SVCD and play the 30 minute movie on my Hitachi 505 stand-alone DVD player. Normally, it works very good. Last two times using the same CD-RW disk, I got some blocky artifacts at the start of the movie. The start of the movie is a still title with music in the background. After the still title has played, the movie plays flawlessly to the end. This happened twice and has never happened before. So, I looked into the setting of TMPGEnc 2.51 and it had "No motion search for still picture part by half pixel." Wonder if that was the problem? I use 2-pass VBR (new)2450max, 1950ave, 800min, High Quality. I tried it with "Motion Estimate Search", but got blocky results at the start of the movie also.

Got any ideas or suggestions, please?

Hmm.

Try with a NEW cd-rw or try with a ordinary CD-R just to make sure it's not the cd-rw disc.

Oh and another thing, try to burn the CD at 2X speed and with "track-at-once". I burn with 4X usualy but not more since some standalones have problems reading the disc if you burn fastar than 4X. The thing is if the standalone encounters some error or read problem it slows down and the blockyness will accour I think.

And another thing. Try and keep the filesize of the encoded file to 800mb I know there are files out there that are 813 or 824mb but I have had problems burning them since I found out that some cd-r's get wasted because that people are pushing the maximum data onto cd's.

/Regards Dennis

I need help!! I am having problems getting audio when encoding avi to mpeg1(ntsc vcd default) i get my video perfect, but there is no audio, HELO plz
SJ

Hmm extract the audio from the avi file and use the uncompressed wav file for sound scource and the avi for video scource, then encode it, will work fine then.

and make sure that the audio is at 41000khz......

I get an error when trying to cut an mpg file in windows xp. Before I was able to get passed the error and cut but now windows closes tmpg. Anybody have a work around.

Managed to encode divx/avi file to mpg format with tmpg enc but it is too bit too copy onto a cd. Tried to cut/edit movie with mpeg tools but when i get to the bit where it asks you to move the slider to the middle part of the movie the slider does not move and the program stops responding. Any answers?

You may have frames corrupted.

use something like DIVXFIX for ur avi file and see if it can fix it.

TMPGENC never lies! :)

Techno

Before you move any slider, try to click start and then click Pause right away, now you can try to move your sliders.

i have a problem when I encoding avi to svcd pal, a error arrive "illegal floting decimal point calculator order".
how i do to resolve this problem ? because i can't encoding my avi.
sorry for my english (I m french).

increase the directshow filter to a higher priority also, tick or untick all of the check boxes in the quantize matrix settings.

Techno

In converting an AVI to SVCD (2-pass VBR, 1700 avg. bitrate, high quality motion search, v2.53), it seems that TMPGEnc is actually introducing some block noise that's not apparent in the original. I'm not using any "soften block noise" options in TMPGEnc because the original is a very clean DVD rip in DivX format. Could it be related to my DivX codec v4.12 - I've seen a lot of anti v4.x and v5.x DivX discussion on this board? Any suggestions? The original AVI resolution is 576 x 304, and I'm using the "Full Screen - keep aspect ratio" setting.

- dooger

Hmm. I have had the same problem.

I guess you have to live with some blocky noise in some frames since of verry fast movement, but you could try to put the AVG. bitrate up to maby 2300 or something. As long as it fit's onto two 2 cd's or 3 cd's or maby 4 cd's.

Use the Hightest motion search as well.

Other than that, I don't think you can do a whole lot more If you want to stick to the SVCD standard with the templates. Allso set the Lowest Bitrate to 300 because some players don't like it if there is no data to process. Or maby "padding byte" fixes that too, donno about that.

Since you use 2-pass VRB I think that a higher AVG. bitrate will make the blockyness go away, at least so it's not disturbing.

A nother way to fix it is to use 4-pass or 5-pass VBR, but that is not supported in Tmpgenc and I have learn that it dosn't matter if you have a good scource like DVD file.

/Regards Dennis.

I cannot use TMPGenc to split files since i bought a new pc running Windows XP. Is this a known problem, adn therefore is it going to be dealt with, or is it just something that I may be doing. I get an address error message every time i try.

I can still convert from avi to mpg, it just seems to be using the tools that is a problem. Any ideas please?

I have Xp. I get that error message every time I use Merge/Cut. Just ignore it, it doesn't affect the video

Is it really supposed to take 13 hours to convert mpeg to svcd? The mpeg file is about 689mb...

nope, it is not suppose to take that long.

What filters are you using?

uninstall the MPEG2 filters u have (like DVD software) and download and install the LIGOS filters, it will be much faster with the same quality.

Techno

I think it also depends on your hardware. A Pentium 3 500 is the minimum recommended processor. I use a Pentium 2 350,so for me, 13 hours for an SVCD conversion is about what it takes.

I totally agree with webs1.
It depends on your hardware specification, and your setting.
"689MB" and "13hours" sounds within "possible" for me.

Uninstalling DVD software and installing another MPEG-2 codec may have
different result, but not always good, sometime gets worse, so
I do not recommend that unless you do that on your own risk.

of course, it depends on your CPU speed. Make sure that you are not doing anything in the background as it will take more time encoding!

Techno

ok thanks a lot!!!
i have a p 500 mhz. maybe i¡­ll try another codec. thanks again!!!

Hi Guys!
Don't laugh at me. But 13 hours would be a dream for me! Running 166pentium
64megs ram, 30gig hard drive. hp cd burner. I am used to it taking so long. everything is relative. But I make great movies, sucka is running non stop. lol

Hi
I cant speak english very well but I will try to describe my problem as good as I can.
Okay
I have load my avi file into sourcefile, but the previe-wwindow didnt change the size or colour. only black.
I clicked on settings - advanced - doubleclick on source range - and here i can see a black screen also. only the soundline is shown.
I have encoded it and the result was
a movie with black screen and wonderful sound.
I realy hope you could help me
watching it with windows mediaplayer the movie was excellent
thanks for help

if it is a DIVX v5 avi then TMPGENC is not compatable with it.

uninstall the DIVX v5 codec
install v 4.11 or v4.12 codec of DIVX

then load the avi and encode in TMPGENC

all should be well :)

Techno

I have an Avi File. While Encoding the preview window is black and after Encoding the whole mpg-file is black with sound. Is this because it is a Divx-format?

if it is a DIVX v5 avi then TMPGENC is not compatable with it.

uninstall the DIVX v5 codec
install v 4.11 or v4.12 codec of DIVX

then load the avi and encode in TMPGENC

all should be well :)

Techno

I have an avi file which I tried to convert to mpeg on this program so I can burn it on a VCD. When it was done, the audio was the only thing that showed up, and the video was not there. I've read some others with this same problem, but as one of the others, i do not believe this is an older file, as the thing was just released. help would be greatly appreciated.

if it is a DIVX v5 avi then TMPGENC is not compatible with it.

To make it compatible (in other words, to encode video and audio):

uninstall the DIVX v5 codec
install v 4.11 or v4.12 codec of DIVX

then load the avi and encode in TMPGENC

all should be well :)

Techno

how do I uninstall the DivX v5 codec thing though.... and load v4.11 or 4.12

nevermind.... i got it

Starting EMPGEnc for the first time works fine. But now the program creates no output while processing. Processing itself (CPU usage, progress, elapsed and remaining time looks normal). But source position don't change from 00:00:00.
Input is the result from DVD2AVI (.d2v-File). All the programs are running under WinXP.