This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
i have two mpegs and want to merge them. So i start tmpgenc and click MPRG-Tools (merge & cut).
Add both mpegs select from beginning to the end of every part und "run". Everything seems ok, but only first part is outputted, so the two parts arent togetter finally.
If you cant get it to read or write the SVCD Header then edit it as a "mpeg2 VBR" stream and after de-mux the file and re-mux it with the "svcd setting" and see if it will write the header then, some authoring programs will accept mpeg2 files without a svcd header, like VCDEasy, or Ulead dvd workshop"...
Hi, just a note for other people like me who are new to a lot of this... I was trying to encode some files and kept on getting "writing stream errors" and a freeze up. I wasn't sure what was going on but it seemed (after several hours of trial and error) to involve my computer rather than any specific video program. (such as TMPG or NERO). I tried to use Virtual Dub to extract a .wav and I got the message that I was out of memory.
My computer said that I still had 5 gigs free, but I thought I'd defrag the hard drive and make a bit more room. (I have been downloading, burning and deleting files 24/7, so I figured a defrag was in order. I downloaded PowerDefrag thru CNET. I installed the program, and a message popped up saying that I had some problems on my hard drive, and that these problems needed to be corrected before I could defrag. So I ran scan disk, and I found that I had "crosslinked files occupying the same sector". So I deleted all the screwed up stuff. Now I found that I supposedly only had 800 megs free disk space available... I restarted the computer and it still said the same thing, so I deleted a bunch of stuff I never even looked at and then low and behold, everything worked just fine.
So - what I'm trying to say is... it's not always the TMPG program that is at fault... sometimes it's the garbage on our computers, the residue from too many
KaZaa downloads or similar things....
I created a DivX-File with the Avi-Output. The Video-Stream was 2-Pass-DivX 5.0.2 and MP3-Audio-Stream. The file was 700Mb large and I tried to open it by "The Playa" - DivX-Player. After 1 minute and my HDD worked a lot! I got an error-Message. I suppose that "The Playa" tries to write the whole file into cache and then play it.
Is there a preferred setting or template available for encoding animated .avi files to SVCD format? I have many .avi cartoons uploaded to my computer that are ready for SVCD conversion. Any suggestions?
When you have the TMPG encoder picture on the screen, go to the "File" header, top left corner, and scroll down to MPEG TOOLS. Open up this file and go to "merge and edit". You then add the file you want just as tho you were going to encode it with TMPG - presumably it is a file that you made with TMPG already. Then once the file-name appears in the box you use the mouse pointer to "click" twice on the file name and another box with 2 sets of "timers" appears. This is your edit studio, good for clipping out "previews of coming movies", advertisements, or whatever, or for splitting a long file into 2 smaller ones. Remember to provide a new name for the "output" file. If you are making 2 small files from QUEEN OF THE DAMNED.MPG You can call ther first half DAMNED1.MPG and the next one DAMNED2.MPG.
I find I have to do these in 2 separate operations. Perhaps both could be done in "batch" mode while you sleep, but I do not know if it is possible.
I would like to convert my NTSC video into PAL mpeg file.
Is it possible to do it this way?
If not please suggest me a best way to do this.
Thank you all
You can"t do it properly with tmpgenc, there is a tool that will turn your Pal avi file into a true NTSC avi file then you can encode it to mpeg, it is called "DV Film Maker" you can download a copy here:http://dvdsoft.da.ru/ but I haven"t tried it and heard that it does a very good job but it takes a while...There are instructions on how to do it another way on this BBS you will find it if you use a search function on the top of this BBS....
It is easier if the NTSC file is a 23.9fps Ntsc you can just change the frame rate of the 23.9fps avi file to a 25fps avi file with "avi frame rate changer" and then use a audio editing program like "Cool Edit" or "Sound Forge" to shrink the audio to the new length of the video...
Ok... I am getting a little confused so you young ones help me if you can.
I shoot home movies on a DV cam and then produce a great AVI file. I then use TMPGencoder to convert that AVI to MPEG 2 (NTSC 480x480)
I have asked what settings are best to encode with and I get confused by the answers. I want to be able to get a good quality movie. (No longer than 30 minutes usually) I hate when it pixelates in fast motion....
Many of you you suggest VBR, 2 pass VBR, CQ but the settings you suggest to me doesn't make sense. You talk about a average, maximum, and minimum bitrate. For example I think one gentleman said he preferred CQ with a setting of 4000 max, 2250 average, and 500 minimum. Another gentleman said use 2 pass VBR with a setting of 5000 max, 2250 average, and 500 minimum.
My question to you is I thought the SVCD specs to be able to be an SVCD was max 2520. If I set the max to over that (unlock) will this not then be some areas of the MPEG2 that goes over the 2520 and then not an acceptable MPEG2 SVCD file.
(I tried many of the settings and the burining proggy tells me this is larger than SVCD specs, do you want to creat a XSVC?)
Yes, it won't be a standard SVCD but lots of players are able to read XSVCD (and XVCD too) which is the best way (in my opinion) to convert movies...
I personnally use CQ because it gives me the same or better results than with 2 pass without losing the time of a 2nd pass encoding.
The best things to do (for me) is to set the motion search precision to High Quality (highest does not give real improvement and is much longer) and to set your templates to CQ Max. 4000, Min. 1800, CQ 65 (or more as your movies are short, CQ 65 gives me +/- an hour of movie). This will give you a really nice picture without losing time and disk space. I made a mix between ASHY's template, kwag's templates and some personnal discovery. If you want, I can send it to you...
As I already told you more and more DVD players are compatible with XVCD or XSVCD, to check to you can go to http://www.vcdhelp.com, there you'll find a compatibility list with the most common players.
I would add that it may be helpful to you (as it was for me) to make a bunch of small clips at various settings and burn-and-test them. Make a short avi (say, a minute) that includes typical content especially the motion you're concerned about. Convert it to MPEG as many times in as many ways as you want, and burn to CD or CD-RW whatever and try in your player. Note these may all play on your PC just fine but your set-top player is the true test. I was for example able to burn a "non-compliant" SVCD with all these clips on it, and then played it back & was able to observe quality differences, audio problems, stuttering,etc.
I learned for example that my player likes SVCDs just fine, but I can't exceed by too much the 2600bps bitrate standard.Also, my player (a Sony) apparently needs 44.1kHz sound for VCD and SVCD and 48kHz for DVD, again it wants "standard" formatting.
Hi,
I have now encoded an AVI File, but I cannot here any sound.
(The program does'nt identify any audio stream)
The originial file has sound.
What can I do ??
Regards
Norbert
The audio from your avi file is probably a incompatable format for tmpgenc to encode, you will need to extraxt the audio from your avi file to a wav file with "Virtual Dub" then just encode the audio and multiplex it with the video you allready encoded......