TMPGEnc Video Mastering Works 5 BBS

Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.


TMPGEnc Video Mastering Works 5 BBS [ Sorted by thread creation date ] << < Prev.   [ 13 / 40 ]   Next > >>
Classify Title User name Reply Last update
Free talk Important message for ffdshow & Haali users Persen 5 2013-08-18 20:02:10
Question Not enough storage is available to complete this operation (error code 0x8007000e) maddabbo 2 2016-06-01 02:44:47
Question TMPGEnc vmw 5 keeps splitting files of 3 & 4 gb goingape 1 2013-07-30 09:30:30
Question ActiveMovie Window system error Douglas Bruce 1 2013-07-25 08:58:51
Question error adiportu 0 2013-07-21 14:55:32
Question AVI Output peterhun 3 2013-07-21 08:33:17
Question Audio/Video filters Alpha1 1 2013-07-19 02:42:52
Question Best format for HD video but smaller file size? Bob 4 2013-07-19 08:26:37
Question Keeps on crashing !!! BlizzardUK 2 2013-07-15 11:14:00
Question VMW Licensing question editor123 3 2013-07-06 03:07:58
Bug report VST Support slow and Buggy beachside 1 2013-07-03 14:14:15
Question Why is there no DEBLOCKING filter? George Thomas 1 2013-07-02 06:02:42

TMPGEnc Video Mastering Works 5 BBS [ Sorted by thread creation date ] << < Prev.   [ 13 / 40 ]   Next > >>
Free talk - Important message for ffdshow & Haali users No.67857
Persen  2013-07-30 05:21:12 ( ID:as4qxzcqqln )   [ Delete / Reply with quotation ]

This is an important message for those of you who use ffdshow and Haali in order to work with video, who has been encoded with DTS audio.

The latest version of ffdshow has gone thrue some major updates in the mixer settings.
It is no longer required to set it to 5.1 channels or more in order to read all audio channels in the DTS structure.
In the latest version of ffdshow, all you have to set in the Mixer setting is: same as input
Both TVMW5 and TAW5 will be able to read determine the correct number of audio channels in the DTS structure of the video file you wish to work with.


George  2013-07-30 18:41:36 ( ID:lsk7calqe8h )   [ Delete / Reply with quotation ]

Nice to know, thanks.


YAroslav  2013-08-11 23:45:44 ( ID:ttsphyskkhh )   [ Delete / Reply with quotation ]

Don`t work.
Windows 8 x64 Pro
ffdshow_rev4500_20130106
Haali Media Splitter 1.13.138.14
TMPGEnc Video Mastering Works 5 5.4.0.100 Trial
DTS Audio 5.1 48 kHz 768 kbps 24-bit in M2TS or TS not detected.


Persen  2013-08-15 03:10:55 ( ID:as4qxzcqqln )   [ Delete / Reply with quotation ]

It works under Windows 7 64 bit.

If you downloaded the 64bit version of FFDSHOW, uninstall it using Revo Uninstaller (freeware) in order to be 100% sure that everything has been removed, which also incl. everything it wrote to the registry and reboot computer.
Then download the latest 32bit version of FFDSHOW at the official site http://ffdshow-tryout.sourceforge.net/
Reason: Haali is 32bit software and can't work propperly together with the 64bit version of FFDSHOW, they have communication issues.

Once the 32bit version of FFDSHOW has been installed, its time to set the propper settings.

Audio decoder configuration/Codecs:
TrueHD: libavcodec
DTS: libdts
Uncompressed: All supported

Now activate the mixer in FFDSHOW and set Audio speakers configuration to: same as input

---------------
Now the time has come to adjust the audio settings within TVMW-5:
Options => Preferences => Input/output format list => File input plug-in
Remove here everything that has been marked EXCEPT the one at DirectShow file reader, then OK, close TVMW-5 and then load it again.

Above is also how you do it in TAW-5. Their audio configurations are identical.

Note: This does NOT give support for DTS-HD Master audio (Blu-ray), only standard DTS, which is commonly used by Blu-ray movie rippers in their MKV files.


YAroslav  2013-08-15 20:08:33 ( ID:uviccz/dopl )   [ Delete / Reply with quotation ]

In the list of audio for TS, Dolby Digital only.


Persen  2013-08-18 20:02:10 ( ID:as4qxzcqqln )   [ Delete / Reply with quotation ]

The TS and TRP filetypes (both the same) are normally only used for TV broadcast recording by settop boxes and Smart-tv's, where DTS is not supported.
If you have .ts files with DTS audio, then you have files that are out of standard, which i do understand can't be determined correctly by video editors, because they demand that the file types follow the rules that has been made for them.

But for .ts files, you do also have MPEG and AAC audio. These two are also on the list of supported audio formats for TV broadcast and can also be found on the list of audio codecs in FFDSHOW.



Question - Not enough storage is available to complete this operation (error code 0x8007000e) No.67847
maddabbo  2013-07-28 00:47:36 ( ID:zi/nasxjafn )   [ Delete / Reply with quotation ]

I cannot encode to a large external drive with 2100gb free.
I get this error. The drive is USB3.0 I've connected it both usb 2.0 and usb 3.0 see if either would work.

I'm trying to encode 32000 tifs into an avi for mastering at 1080P.
I'm also making proxy wmv and mp4 files at 854x480 res @ 4Mbit. They don't work either. All paths are set to this drive in preferences. There is not enough space on my internal drive. Based on Microsoft's info on the error it looks like a bug? Any ideas how to solve? I'm guessing it has to do with the large number of stills. I've tried both CUDA and intel encoding.

Not enough storage is available to complete this operation (error code 0x8007000e)


Persen  2013-07-30 04:47:31 ( ID:as4qxzcqqln )   [ Delete / Reply with quotation ]

What file system are you using on that external drive, FAT32 or NTFS ?
If your drive is FAT32, then it is equal for not having enough storage, because FAT32 is limited to just about 4GB in file size.
The drive has to be formated to NTFS if you want to go above 4GB in file sizes.


Rob Stow  2016-06-01 02:44:47 ( ID:pukzkxfjbil )   [ Delete / Reply with quotation ]

Note: I have Video Mastering Works 5 running on Win7 x64

All of my drives are NTFS and contain many files well over 4GB yet in the last few days I am suddenly seeing this error message also.

As well, usually I can use the program to edit videos larger than 9 GB but often I get this error message when dealing with files well under 4 GB.

Lately I am trying to re-encode a bunch of 1080p MP4 videos to 720p - no editting involved - and I am often getting this error 1% or 2% into the encoding. When I watch the process in Task Manager I can see the encoding process's RAM usage at around 300 MB of RAM and then suddenly spike to 3.5 GB. With videos that successfully encode - even 8 GB ones - the RAM usage stays around 300 MB for the whole encoding process.



Question - TMPGEnc vmw 5 keeps splitting files of 3 & 4 gb No.67846
goingape  2013-07-27 06:20:06 ( ID:y1rnj2elvaj )   [ Delete / Reply with quotation ]

hi

TMPGEnc vmw 5 keeps splitting files of 3 & 4 gb into 2 files

i tried to encode a 4 gb mkv file into a divx avi format

and it does a great job but its splits the output file in 2 files

which i then have put together again

i look in the option if there is a way to switch this off but i couldnt find anything

why does TMPGEnc vmw 5 do this and is there a way to stop this from happening


tkrave  2013-07-30 09:30:30 ( ID:.yfti6punfa )   [ Delete / Reply with quotation ]

This is a limitation of the AVI format which limits files sizes to 2GB or less. Choose a different format or lower your bitrate.



Question - ActiveMovie Window system error No.67840
Douglas Bruce  Home )  2013-07-22 14:34:42 ( ID:zofej3wfzq6 )   [ Delete / Reply with quotation ]

Recently I have been getting this error message when importing .mov files into VMW5

ActiveMovie Window: TMPGEncVMW5.exe - System Error
The Program can't start because ad2h264dec.dll is missing from your computer. Try reinstalling the programme to fix this problem

The error appears with a loud "Pling" sound. Pressing Ok gets another pling and the second time it disappears - but the file is them imported as usual.
In other words, I can import the files but I get this double error message when doing so.
Any ideas?
I have no recollection of ever installing anything called ActiveMovie
Regards
Douglas


tkrave  2013-07-25 08:58:51 ( ID:resxbfmz4s2 )   [ Delete / Reply with quotation ]

ActiveMovie is DirectShow (made by Microsoft) which basically allows Windows Media Player to play videos. The error may have to do with a codec or something.



Question - error No.67835
adiportu  2013-07-21 14:55:32 ( ID:wuwbgfgnyqk )   [ Delete / Reply with quotation ]

I need to encore 2 media from a dvd to MOV to work with AVID
the first disk was good - no problem. The secend disk in the last page of TEMPGE the software worte on the status : "An arror stop the output"
It didnt say whay ... I need help please!

portuadi@gmail.com

Thank you!



Question - AVI Output No.67828
peterhun  2013-07-20 18:15:09 ( ID:gichnmtwl32 )   [ Delete / Reply with quotation ]

I mostly work with VirtualDubMod but this time it doesn't give a good result due to frame conversion, so I am using TMPGEnc VMW 5 (v5.0.6.38).

My source video is NTSC film and TMPGEnc gives me a satisfactory conversion to avi when using the XVID mpeg4 codec. But the resultant file is AVI 1.0 and I want it in AVI 2 OpenDML.

If I select the DIVX 6.9.2 codec this does give me an AVI 2 OpenDML file but with a Packed Bitstream that I don't want.

I prefer to use the XVID codec option as I make use of Zone Weighting throughout the video. How can I save it in AVI 2 OpenDML format, I can't see where that option is if it exists.


George  2013-07-21 00:20:59 ( ID:eziith4xip. )   [ Delete / Reply with quotation ]

I'm using the latest version, and I see options for AVI 1.0/2.0 in the DivX file output (not AVI output). If you install ffdshow, you should be able to select it in AVI output, and make your choices there although ffdshow has removed Xvid encoding from its options. Have you installed the Xvid or DivX codec in your system separately? If so, you might see them in AVI output and make selections there.


George  2013-07-21 00:22:23 ( ID:eziith4xip. )   [ Delete / Reply with quotation ]

Or maybe, you could locate an old, or custom ffdshow version that includes Xvid. Don't ask me where.


Peterhun  2013-07-21 08:33:17 ( ID:gichnmtwl32 )   [ Delete / Reply with quotation ]

Tks George. I have been using VDMod for years with all the codecs installed, so it appears that TMPG XVID doesn't have the AVI2 in its makeup.

DIVX does but it outputs in a Packed Bitstream (FF search doesn't work too well). If I unpack with AVIdemux then have sync issues.

I'll use TMPG with XVID option then run the file through VDMod in Direct Stream copy mode selecting AVI2 that way, (but I get a file that is 200Mb larger with the same Qf as if I used VDMod from scratch - but I can't because of the frame conversion problems with this video).

Shame, 'coz it's a good program otherwise.



Question - Audio/Video filters No.67819
Alpha1  2013-07-18 13:01:49 ( ID:ymwunosy5s. )   [ Delete / Reply with quotation ]

I would like to have the Audio and Video filters always available on the filter list. As it is, I have to install them on the filter list for each clip. When you have a lot of clips this is a REAL pain. Is there a way to do this?
Thanks for any help!


tkrave  2013-07-19 02:42:52 ( ID:resxbfmz4s2 )   [ Delete / Reply with quotation ]

You can create a filter template that contains all of the filters you want.
Then, in the preferences, you can set the default filter template to load when you start the program.



Question - Best format for HD video but smaller file size? No.67818
Bob  2013-07-18 07:49:59 ( ID:9b2wp5wodyh )   [ Delete / Reply with quotation ]

I have a 6 minute HD (1920x1080) MOV movie file that I want to replace the original audio with my own soundtrack (a WAV) and then post this video to Facebook. The original MOV file is 1.5 GB and I would like to create a file that is significantly smaller in size than that so it will not take forever to upload via my DSL line but still maintain as much of the original quality as possible.

This is my first adventure into outputting HD content...so far, all I've done is DVD MPEG-2.

What format and options would you recommend for this? Thanks!


tkrave  2013-07-19 02:45:01 ( ID:resxbfmz4s2 )   [ Delete / Reply with quotation ]

MPEG-4 AVC H.264 is the format most people are using now for HD video. You can set the video bitrate to roughly half that of an MPEG-2 video and achieve similar detail levels.


Bob  2013-07-19 05:44:35 ( ID:u96a1mykrxo )   [ Delete / Reply with quotation ]

Thanks tkrave. As you can see below, the original video is also MPEG-4 AVC bit rate according to MediaInfo and the bit rate is 33.2 Mbps. Should I use that same value when I re-encode it with the new audio, or can I use a lower value without significant quality loss? Mind you, the original video was taken at a concert to the lighting is not all that great, so it's hardly a professional looking video clip.

Complete name : Y:\MVI_0494.MOV
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 1.48 GiB
Duration : 6mn 6s
Overall bit rate : 34.7 Mbps
Encoded date : UTC 2013-07-14 05:38:57
Tagged date : UTC 2013-07-14 05:38:57
CNTH : 8DB
com.apple.quicktime.make : Canon
com.apple.quicktime.model : Canon PowerShot ELPH 330 HS

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Baseline@L4.1
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=12
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 6mn 6s
Bit rate : 33.2 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.668
Stream size : 1.42 GiB (96%)
Language : English
Encoded date : UTC 2013-07-14 05:38:57
Tagged date : UTC 2013-07-14 05:38:57
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709


Bob  2013-07-19 07:03:20 ( ID:u96a1mykrxo )   [ Delete / Reply with quotation ]

Correction:

>As you can see below, the original video is also MPEG-4 AVC and the bit rate is 33.2 Mbps.


tkrave  2013-07-19 08:26:37 ( ID:resxbfmz4s2 )   [ Delete / Reply with quotation ]

To be safe you can use the same bitrate. However, if you want to cut down on the file size, you can try a lower bitrate.

Your camera may only shoot at a constant bitrate so there may be excess data in relation to what is on screen.
First, I would suggest encoding with a variable bitrate (VBR). This means the bitrate will change depending on the level of detail needed for a particular frame. If there is a 2-pass option, you should use it.

You can then set the maximum bitrate to a lower bitrate than the source file.
I'd suggest doing some tests if you're not sure about how low you should go.
Isolate a short clip (don't waste time re-encoding the whole video) that includes fast action (quick camera pans/fast-moving objects) and still shots. Then test out various bitrates on it. You can try going low first (11Mbps or so) to see how drastic the difference is. Depending on how that looks, you can then go lower or higher.



Question - Keeps on crashing !!! No.67804
BlizzardUK  2013-07-12 05:07:31 ( ID:8l//1xjzpnf )   [ Delete / Reply with quotation ]

I am getting so frustrated, I can't encode some files as it keeps crashing on me, everything I try comes up with a similar error, but the numbers often change. I am trying to encode some XDVDs. This is the message I get........

The output process terminated abnormally (8)
Exception Code : 0xc0000005 (this sometimes changes)
Faulting Address : 0x63d3fb3C (this sometimes changes)
Faulting Module : MovieMPEG.vme (Base address 0x63960000)(this sometimes changes)

Any ideas ? It is really annoying. I have tried different source files, and changes source and output drives, but it still crashes, usually within the first 25% of the files. I have also tried with and without batch queue usage.

Thanks.


George  2013-07-13 06:48:33 ( ID:2xj.eplz7yk )   [ Delete / Reply with quotation ]

For such issues, you should contact support directly. Could it be a RAM issue? Do you have enough?


BlizzardUK  2013-07-15 11:14:00 ( ID:8l//1xjzpnf )   [ Delete / Reply with quotation ]

Thanks. I have a feeling it may be a over heating issue, it seems to happen during the day and evening but works after midnight approx, we are going through a heatwave here (for UK standards anyway) and my PC is kept in a summer house which gets up to 34 degrees. What I have found is that if the temp of my CPU is under 72 degrees then it is okay, as soon as it goes above that for longer than a few minutes the encode fails. My PC seems to run okay though and doesn't reset or hang. This happens with Authoring Works, Mastering Works, and Handbrake.

I can only presume it is this, as it doesn't make any other sense that it works with the temp in the 60's but not the 70's. I thought 70's would be fine though, but perhaps the software has an inbuilt temp gauge that cuts out when it gets to 73 degrees or above.

I am going to try and find a way to reduce my overclock that was done for me.



Question - VMW Licensing question No.67781
editor123  2013-07-03 13:02:05 ( ID:zt8tip7sl.2 )   [ Delete / Reply with quotation ]

Hi,

I wish to purchase a VMW 5 license.

I wish to use it at work and home. If both computers are NOT connected at the same time will I still be able to use either one? Or, do I need to purchase TWO separate licenses though I'm the only user?

Thanks,

JAS


Persen  2013-07-05 18:42:12 ( ID:as4qxzcqqln )   [ Delete / Reply with quotation ]

I strongly suggest that you contact Pegasys about this registration matter, because their softwares do contact their server once a while to check for validation to avoid piracy. Their server could falsely believe, that your fully legal purchased license has been a victim of piracy, because it suddently registeres two different IP adresses where it is installed.


George  2013-07-05 21:17:07 ( ID:4uslfllopul )   [ Delete / Reply with quotation ]

I'd like a clarification on this, too. In the shopping FAQ it's stated that the software cannot be used on 2 machines. However, it also states that it can only be used on one machine at a time, and that "You can install the software and validate your license on another machine provided you first completely uninstall the software from the previous machine".

So, is possible to use it on 2 computers without running into validation problems? Is it really necessary to uninstall first and will that prevent validation problems? It sounds a bit silly having to uninstall-reinstall every single time.


tkrave  2013-07-06 03:07:58 ( ID:resxbfmz4s2 )   [ Delete / Reply with quotation ]

I wouldn't install it on more than one computer within a short amount of time; that will lock the license and you'll have to contact support to get it unlocked. What's a short amount of time? I don't know exactly, but I'd wait a couple of days before installing on a second machine. I don't think you have to uninstall it each time though.
Basically I wouldn't use it on two machines unless you are using it very infrequently. If you are using it on both machines every day, then you should buy two licenses.



Bug report - VST Support slow and Buggy No.67776
beachside  2013-07-02 17:29:44 ( ID:fuvdq/qpjjg )   [ Delete / Reply with quotation ]

New VST support 'needs more work'! Very sluggish and slow.


smartfinder77  Home )  2013-07-03 14:14:15 ( ID:qdm08jb1tfc )   [ Delete / Reply with quotation ]

Stereo to stereo is very limited, stereo to surround 5.1 would serve much more, I hope to use someday vst 5.1 to 5.1 or 7.1, VI VST Suite, DTS Neural Surround upmix 2.0 - 5.1 - 7.1. or the like.

http://forum.doom9.org/showthread.php?t=85446&page=1



Question - Why is there no DEBLOCKING filter? No.67769
George Thomas  2013-06-29 09:47:07 ( ID:iiprduolohg )   [ Delete / Reply with quotation ]

VMW5 is a great program, but I really miss having a deblocking filter built in.

I am constantly using avisynth when deblocking is required, a pain.

Many other video editors have this, like Corel Video Sudio X5..

TIA


George  2013-07-02 06:02:42 ( ID:eziith4xip. )   [ Delete / Reply with quotation ]

You should contact the support team for this request. You could use the deblocking feature of the x264 encoder (MPEG file output / advanced).



TMPGEnc Video Mastering Works 5 BBS [ Sorted by thread creation date ] << < Prev.   [ 13 / 40 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.