TMPGEnc MPEG Smart Renderer 5 BBS

Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.


TMPGEnc MPEG Smart Renderer 5 BBS [ Sorted by thread creation date ] << < Prev.   [ 2 / 3 ]   Next > >>
Classify Title User name Reply Last update
Question Why can't I output MP4 with MP4 input? Baffled 1 2018-04-10 13:51:21
Question scene detection automatic key frames dima 0 2018-01-17 06:48:29
Question meatadata transfer from Silicondust DVR Royce 0 2017-12-20 15:04:47
Question MPEG-4 HE AAC decoder required Hanush 0 2017-12-19 23:30:45
Question Converting Flv File SouthGaBoy 1 2017-09-16 13:52:26
Question I don't understand how to do simple things in this program. Please help! JaiBubwan 2 2017-06-08 02:03:10
Bug report Unsupported file bzi999 1 2017-05-24 19:18:15
Question Activation/Validation ThisIsMyUserName 3 2017-05-19 07:29:33
Question Shows on multiple desktops asilentnoize 0 2017-03-19 08:34:34
Bug report TMSR5 not support AC3 (DD) 640kbps audio stream Sergey 0 2017-03-09 01:38:14
Bug report Using Audio Fade-In with duration in 1 second leads to re-encoding whole audio track!!! Sergey 0 2017-03-02 01:38:28
Bug report New version 5.0.8.10 - error during startup Deckard51 2 2017-01-31 18:45:47

TMPGEnc MPEG Smart Renderer 5 BBS [ Sorted by thread creation date ] << < Prev.   [ 2 / 3 ]   Next > >>
Question - Why can't I output MP4 with MP4 input? No.70992
Baffled  2018-04-09 04:28:56 ( ID:j8majifa/ta )   [ Delete / Reply with quotation ]

I want to trim several MP4 files, all created the same way with the same software. With most of them, Smart Renderer 5 allows me to output the trimmed file back to MP4 format, but some of them it insists on outputting them as MPEG2 /.ts format!

Why is this happening? The ONLY operation I perform on these files is to trim their length, usually both at the beginning and at the end. I'm not changing anything else. So why can't I output all of these files as MP4 format?

Can anyone help, please?

Thanks!


tkrave  2018-04-10 13:51:21 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

What happens if you just select MP4 as the output target?



Question - scene detection automatic key frames No.70958
dima  2018-01-17 06:48:29 ( ID:nuv8hjardzl )   [ Delete / Reply with quotation ]

Is there a way to let the application run a scenes detection and automatically create a keyframe for each scene?

Also is it possible to let the application scan the whole video for thumbnails and load all of them, so when I scroll through the video, I don't have to wait for the thumbnails to load.

Thanks.



Question - meatadata transfer from Silicondust DVR No.70934
Royce  2017-12-20 15:04:47 ( ID:th1ounjohao )   [ Delete / Reply with quotation ]

After editing out the commercials and the beginning to a show or movie it will no longer show up in the DVR interface because the metadata was not transferred over to the new file. They use a transport stream with .mpg extension and the metadata is in the first 12032 bytes of information on the file. Is there a way to get this information transfered to the new file?

Thank you for any help.

Royce King



Question - MPEG-4 HE AAC decoder required No.70933
Hanush  Home )  2017-12-19 23:30:45 ( ID:nv3lts7zrh2 )   [ Delete / Reply with quotation ]

Video file * .ts. in HEVC format, MPEG-4 HE AAC audio, opens in the program without audio. Audio is there, but the program can not decode it. An upgrade of the program is required?



Question - Converting Flv File No.70839
SouthGaBoy  2017-08-23 16:40:15 ( ID:9w5clt/jgzo )   [ Delete / Reply with quotation ]

I have some FLV files with Speex audio, I have noticed that this program supports FLV files but it will not load the Speex audio portion of the files. Does anyone know of a way to do this or if speex audio decoding will be added in a future version?


tkrave  2017-09-16 13:52:26 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

Have you tried using the DirectShow filter for Speex? If not, you can download it here: https://xiph.org/dshow/

That might solve the problem.



Question - I don't understand how to do simple things in this program. Please help! No.70766
JaiBubwan  2017-06-05 15:26:16 ( ID:epnnm0ftfd6 )   [ Delete / Reply with quotation ]

When I edit a video, I have to do two things:
1) Select a segment & save it to a new file.
2) Then remove that selected segment from the overall video, which also has to be saved to a new file.

I'm used to the simple SolveigMM interface. You mark a segment. Right click and save it. Then right click and delete it from the timeline. Press one button to save new video (with segment removed).

But in TMPGEnc Smart Renderer, it is so complicated. After I mark a segment, I see no option to quickly save the clip. There are so many confusing buttons. I tried reading the help manual...but it doesn't make sense to me.

Can someone please tell me some steps to accomplish the two things I need to do?


tkrave  2017-06-06 14:06:49 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

So you want to save both the part your are editing out and the resulting video with the edit?

You can't do it the way SolveigMM does it, mostly because TMSR5 does not use a timeline for editing.

In the clip editor window, you should select the segment you want to edit by using the split clip button to mark the beginning and end of the area you want to cut. The split clip button looks like this: <-|-> (a left arrow, a dividing line, and a right arrow). Once done, you should have blue and orange-marked segments.

Then click on OK. A window will appear asking which segments to keep; you'll want to keep both the blue and orange segments in your case.

You'll be back in the clip list window and you should have 3 clips (if you only want to remove one section). You should save the project now as a base project to create the two resulting videos you want.

After saving, delete the segment you want removed, then you can save and output that as your first file. There is an output option to merge all the clips into one video to create your edited overall video.

Reload your base project file and delete the other segments so you only have the section you want to edit out. Then save and output that.

Hope that makes sense. It sounds complicated, but it's not bad once you get used to it. It's just a different way of editing.



JaiBubwan  2017-06-08 02:03:10 ( ID:epnnm0ftfd6 )   [ Delete / Reply with quotation ]

tkrave,

Thank you for your great advice! I understand now.

Though I think one thing that can easily be improved by developers is the "Format > Output Mode" option. Currently, you can either "connect all clips" or "save ALL clips separately".

But for some reason, you cannot choose specific clips to output or merge. This means you have to keep saving & reloading projects to isolate or merge desired clips. Needlessly inefficient.



Bug report - Unsupported file No.70735
bzi999  2017-05-23 17:22:53 ( ID:5l.detkvqkw )   [ Delete / Reply with quotation ]

I have a few DVB-T recordings that I would like to record but the trial version of TMPGEnc Smart Renderer can't open them although I can play it and open in other programs.
Here's a small sample (9MB): https://pkj360.s.cld.pt


Zakk  2017-05-24 19:18:15 ( ID:nrp09m2aqdn )   [ Delete / Reply with quotation ]

>I have a few DVB-T recordings that I would like to record but the trial version of TMPGEnc Smart Renderer can't open them although I can play it and open in other programs.
>Here's a small sample (9MB): https://pkj360.s.cld.pt

The sample's format is MPEG-4 Video Part2. TMPGEnc MPEG Smart Renderer 5 does not support the format other than that of MPEG-4 AVC.
Please check the recording settings of your capture device, then change to MPEG-4 AVC(H.264) if it is possible.



Question - Activation/Validation No.70661
ThisIsMyUserName  2017-03-22 00:14:18 ( ID:s9atscqcvuf )   [ Delete / Reply with quotation ]

After activation/validation is already performed, can the computer be disconnected from the Internet?

As long as no updates are applied to smart renderer 5, the software is not moved to a new computer, the computer's OS/hardware is not changed, etc., will the software then function indefinitely after initial activation/validation, or will the software require the computer to be connected to the Internet periodically in order to continue functioning?

Thanks.


tkrave  2017-03-22 12:46:12 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

It will need to be connected periodically, but once it's validated, you can disconnect it until it asks for validation.


ThisIsMyUserName  2017-04-15 20:13:36 ( ID:s9atscqcvuf )   [ Delete / Reply with quotation ]

That's pretty much a deal killer for me. That is ridiculous and inexcusable for software to require phoning in to Big Brother regularly or it'll stop working.

Activation by itself is not a deal killer. Revalidating if the software is being updated or moved to another machine is not a deal killer either. But this goes way beyond that.


George  2017-05-19 07:29:33 ( ID:gizj1inbaql )   [ Delete / Reply with quotation ]

It's not phoning in to "Big Brother", but to the company that made the program. No need to get paranoid. Having said that, it does make the program more difficult to use, but I guess it's an anti-piracy measure.



Question - Shows on multiple desktops No.70652
asilentnoize  2017-03-19 08:34:34 ( ID:k2hrelvflho )   [ Delete / Reply with quotation ]

I run windows 10 and I use the Task View feature in which I have 3 desktops setup within for multitasking. I noticed MPEG Smart Render 5 shows up on all desktops and not just the one I load the program on. Will there be a fix for this in the future?



Bug report - TMSR5 not support AC3 (DD) 640kbps audio stream No.70641
Sergey  2017-03-09 01:38:14 ( ID:xbxgzw.iubw )   [ Delete / Reply with quotation ]

TMSR5 not support AC3 (Dolby Digital) 640kbps audio stream for output without re-encoding! Why??? It's standard bitstream for Dolby Digital audio format!!!

Please, fix it!!!



Bug report - Using Audio Fade-In with duration in 1 second leads to re-encoding whole audio track!!! No.70632
Sergey  2017-03-02 01:38:28 ( ID:xbxgzw.iubw )   [ Delete / Reply with quotation ]

When I make on Audio Fade-In filter with duration just in 1 second for AC3 this leads to re-encoding whole audio track!!! Why??? This filter must take affect just for 1 or 2 seconds (depend of audio frame lenght. for AC3 it just 32ms!)



Bug report - New version 5.0.8.10 - error during startup No.70600
Deckard51  2017-01-31 13:55:55 ( ID:s69jffiswoh )   [ Delete / Reply with quotation ]

Hello

After installing the new version 5.0.8.10
when you try to start
I get the error "the key was not present in the dictionary"
After pressing OK, the program does not start.
I went back to version 5.0.7.9

error screen:
http://images.tinypic.pl/i/00864/7xk6giwu6wbb_t.jpg

my operating system: Windows 7 Ultimate x64


OK  2017-01-31 17:56:28 ( ID:gcel9z9bovw )   [ Delete / Reply with quotation ]

I have the exact same problem. Just updated to the newest version and the software wont start.


tkrave  2017-01-31 18:45:47 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

They just released a new version which fixes the issue:
http://tmpgenc.pegasys-inc.com/en/download/tmsr5.html



TMPGEnc MPEG Smart Renderer 5 BBS [ Sorted by thread creation date ] << < Prev.   [ 2 / 3 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.