This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
TMPGEnc 2.5 (Free or plus version) BBS [ Sorted by thread creation date ]
I have justed installed the TMPGEnc v2.5. When I execute the program, it failed because of the CPU, it reported that I have to set the CPU something, but I don't understand. I am using a Dual-core CPU Pentium D. Before, it executed perfectly in my Single-core CPU. Could anyone help?
Is it saying something about the CPU being changed?
It usually does this the first time you run it after installing a new CPU, but should correct itself the next run.
Try deleting TMPGEnc.ini from the TMPG folder and then run the program again. If you still get a problem try messing with the CPU options. Option>enviromental setting>CPU
I am using TMP plus 2.5. I usually use Virtual Dub 1.6 to extract the wav and use that file when converting. I recently did this and the sound in the video was way off. Keep in mind the sound matched exactly when I played the avi file with the Windows Media Player and Win DVD. I extracted the wav (after converting to 44100) again and again and tried all different settings up to -10000 because the wav file was too slow. I alway check to see that there is no compression. Then I tried using Gold Wave but it did the same thing. I even tried using the audio gap correction feature in TMP but it did nothing. As far as I know I have all the codecs installed and I have the AC3 decompresser. Below is the info for the file I'm trying to convert.
VIDEO
Frame size 608x256 23.976
Decompressor Xvid Mpeg-4 Codec
Data Rate 752 kbps .61% overhead
It seems to me some sort of skew has been added to the AVI to sync it with the audio. Demuxing the audio to a wav can remove this skew and causes the audio to desync.
Convert the audio to a wav as normal with Virtualdub then reload this wav into Virtualdub as the audio source for your AVI.
Now use the audio skew correction to match up and sync the video and audio.
Once matched, re-save the wav again and this time it should be in sync with your video without the need for any skew corretion. You can check it by loading it as your audio source in Virtualdub.
Yes, it plays correctly in Virtual Dub but when I convert the wav to 44100 and use it for my audio file in TMPGEnc it doesn't match. How do you load a separate video and audio file using Virtual Dub?
You have to use VirtualDubMod to correct for the time difference.
Open the original in VirtualDubMod
Streams> Stream List > Demux the original audio and save as MP3
Convert the MP3 > WAV using Winamp or whatever
Open the original in VirtualDubMod and add the new WAV stream, and deactivate the original compressed audio track, Go to Video>Frame Rate > Change so Audio and Video match
Then Video > Direct Stream Copy
and Save As new AVI file that has the Synch'ed the WAV audio correctly.
I've been using Tmpgenc Plus for a couple of years now. Normally encode OT ref mov files to mpeg2 (have installed QTReader.vfp). Recently had to reinstall Tmpgenc 2.5 Plus and since then whenever I try to import a mov file into Tmpgenc 2.5 Plus the program hesitates and then crashes. It will encode other types of files but no longer will except mov files. Anyone experience this problem?
Forget about using the QTreader.vfp it's old hat and very slow.
Download and install Quicktime alternative 1.62. It should solve your problem as long as you have Directshow as top priority in the VFAPI plugins.
Thanks for reply. I use Avid DV Xpress and I just solved my problem - by unchecking USE AVID DV CODEC when I export QT ref. I'll download newer version of QTreader.
It's not a new version of Qtreader. It's a QT directshow codec that allows any directshow compatible program to decode QT files and therefore works much better and faster.
i have version 2.524 installed on my puter and want to remove it. when i downloaded the file and saved it in a folder it was a zip file...when i unzipped it it unzipped into the same folder.. there is no uninstall file with this software and this program is also not listed when i go to control panel/add/remove programs.
anyone know how i can safely remove this from my system? i am running windows xp.
thanks
I don't mean to be funny, but if you extracted it from a ZIP file then there is nothing to uninstall. Just delete the files or the folder you extracted to and it'll be gone.
thanks for the reply and the help.
i don't think you understand that there is quite afew files that were unzipped into this folder...these files are the tmpgenc files for the wholoe program. here are the files:
-license.txt
-p4package.dll
-readme.txt
-resample.dll
-TMPGenc.exe
-a folder called "template" containg 8 .mcf files, another folder called "extra" with another 4 .mcf files.
-TMPGenc.zip
-tmpgenc.ini
-currentcfg.tpr
-p3package.dll
-tmpgenc.acf
-tmpgenc.vfp
i've e-mailed the tmpgenc site asking about info wether it is safe to delete and have had no response in 2 weeks.
so you saying it is safe to just delete the hole folder containing these files? even with all the .dll files in there?
Just delete the whole lot. I asure you it won't affect your system in any way. The files are not linked to the registery. They are independant of your system files and are simply self contained files, including the .dll's.
All the data is simply contained within the config. files in that folder.
The only part that is stored in the registry is your registration data. However this is not required to be removed and will remain without any ill effect whatsoever.
I'm having the same problem; No Audio. I've tried converting to one .mpg file and I've also tried converting to the video and audio as separate files, but the .wav file doesn't have any audio in it either! I've tried different sources of the same thing I want to convert and same problem. I've had more success with much smaller .avi files, but working with the size of a 1 hour TV episode seem to be giving me a lot of trouble.
I've been having some really weird problems with my TMPG. I've been using it for years now and its been working fine, but now when i finish converting all I have is video and no audio.
I'm not sure if i accidentally deleted a codec or program or something that is essential for avi audio conversion, or if my priorities are wrong...
I have the same problem, on the second page of Project Wizard audio fiels from .avi suddenly stopped opening, only video (when I try to browse it separately from the same file there's an error - audio can not be opened or is unsupported, Windows Media Player can read the audio so it's supported). I've tried to convert again some files I did a few days ago and it also doesn't work. Anyone know what to do except reinstalling the system???
It depends on what container format is being used. I'ts very hit and miss. I've tried to get this format to work myself, sometimes successfully sometimes not. Downloaded many different H264 codecs trying to get certain files to work.
Tried it, just can't get FFDSHOW to work with them. The current version is buggy anyway.
Each H264 seems to differ depending on who made it and what encder they have used. I've managed to get some files working using one method and certain codecs, but then some others just refuse to work unless you can find the right codecs and filters.
It's far to mish-mash at the moment for my liking and not very standardised at all. The protocols need to be tightened up.
My H.264 file is MP4 (High@L3.1). By installing ffdshow's h.264 support, I can actually open it in TMPGEnc...only to get a constant black image. So it doesn't really help me.
It has come to my attention that the recent builds of FFDshow (2005) + TMPGENC
do not work together!
When you have installed FFDshow the decoder is unable to open any AVI file through DShow.
What works really well is AVISynth ( http://www.avisynth.org/ ). I made a simple script with the DirectShowSource filter and loaded it through TMPGEnc and it was good as new.
You might want to tinker with it though, I haven't tested it all the way. All I know is that it works.
i'm trying to convert some avi files into mpeg so i can stick them onto a dvd but after a few minutes of encoding the program just closes itself down with no error message.
Does anyone have any idea what might be causing this ??
I'm no expert, but I've found the same problem when I set the task priority to High in options. I suspect that you are demanding too much of your CPU. Perhaps try closing any applications that are running in the background. Make sure priority is set to normal. If that doesn't work, I'm afraid I don't have any other answers. Hope this helps.
Using Tempc 2.5. When doing AVI to MPEG conversion (the only thing I'd need this tool for) I end up with separate *.m2v and *.wav streams, but no final mpeg. I guess the mixing of the two is called multiplexing, right? Any ideas why I don't get a final mpg? Thanks in advance.