Actually I want to convert it to dvdr rather than vcd. which format in the TMPGEncPlus wizard to use for this 592x320 (1.85:1) [=37:20] file? DVD/PAL? or DVD/PAL(16:9)? TIA!

DVD/PAL(16:9)

katana

hi,
i have a question regarding which is the best format to convert an xvid 592x320 (1.85:1) [=37:20] into using TMPGEncPlus for watching on dvd player? vcd? svcd? anybody know? also what aspect ratio and video arrange method to use? thanks!

Hi, For that Files it would look better as a SVCD ...Usually the "Fullscreen Keep aspect ratio" setting works best if it doesn"t look right to you can can adjust it so it looks the way you want useing the "Clip frame" settings....

katana

TMPGEnc (version 2.53.35.130) suddenly will not run on my Win2000 computer. It opens, but when I try to load a file it just hangs up. It will accept a frame serve from virtualdubmod and display an image of the file to be converted, but non frame served files never get to that state...

All the files I am trying to open have previously opened, and they play fine in WMP.

I'm really not sure where to start with this problem. I suspect there may be a problem in the registry perhaps because if I "install" a newer version of TMPGEnc it knows which file I had tried to open in the earler version and hangs in exactly the same manner.

How do you "uninstall" TMPGEnc and clean out the registry entries?

I will sincerely appreciate any help anyone might offer to me!

Have you tried raiseing the Direct show File reader in the Vfapi Plugins????
Have you tried to upgrade to a Much newer version????

Thanks for your suggestions....

Yes I tried both suggestions with no luck.

In the meantime I did discover my problem. I'd forgotton that several days earlier I had tried to update Windows media player. After some checking I discovered that the update had not succeeded. Strangely WMP would still operate but the update must have messed up the codecs on my machine somehow. In any case I redid the update to WMP 9 and now everything works again

katana

Hello! I tried converting a 640x480 video file to MPG and then burn it to disc using Nero's VCD function (without reincoding). I plopped the VCD into the DVD player and it works all fine and well except that the bottom and top parts of the file are cut off (there are subtitles at the bottom and I can only see half of them). I made the MPG file using all of the default settings so I was wondering what I can do to make the file burn at the right ratio?

I assume it has something do with MPEG Settings -> Advanced -> Video Arrange Method.

Thank you :)

I'm a retard :) This question was answered earlier. Sorry u.u

katana

Hi!

Is there any Plugin for Tmpg to convert ".rm"-Files?

Thx for an answer.

Alphafly

>Is there any Plugin for Tmpg to convert ".rm"-Files?

NO

there are ways to get a rm file loaded into tmpgenc, but the loss of quality really isnt worth the time, its a long ass process

katana

Some of the xvid/divx video files that I have tried to convert to dvd format TMPGEnc overcalculates the lenth of the video by like 3x. ie. a 24 min video file is calculated by TMPGEnc to 80 min. And after the encoding this perticular video there was no sound at all just the film rolling. Are there any plug-ins or solutions that i can obtain to solve this problem?

Some of the xvid/divx video files that I have tried to convert to dvd format TMPGEnc overcalculates the lenth of the video by like 3x. ie. a 24 min video file is calculated by TMPGEnc to 80 min. And after the encoding this perticular video there was no sound at all just the film rolling. Are there any plug-ins or solutions that i can obtain to solve this problem?

you'll need to set your start and end frames in source range, this means you tell tmpgenc exactly what to encode(the 24mins not the whole 80)

it sounds like your source vid has compressed audio in it, you'll need to decompress that audio to wav so tmpgenc is able to recognise it

there is a prog called avi2vcd(dont use it to create vcds, as it sux) but it has by far the best and most user friendly audio decompressor i've seen to date.

so d/l avi2vcd and you'll get decompressor.exe with the package, thats your bitch ;-)

thx a lot it works after the decompression of the video file

no probs enjoy ;)

and you dont have to triple post, we all saw it the first time

Some of the xvid/divx video files that I have tried to convert to dvd format TMPGEnc overcalculates the lenth of the video by like 3x. ie. a 24 min video file is calculated by TMPGEnc to 80 min. And after the encoding this perticular video there was no sound at all just the film rolling. Are there any plug-ins or solutions that i can obtain to solve this problem?

I am trying to convert a .divX movie file to mpeg or VCD....however I get an error: "file name.divx cannot open, or unsupported" Am I wrong to assume that this program does not convert .divX files to other formats?

Thanks in advance,

Kizab

This should help you...
http://bbs.pegasys-inc.com/bbscgi/ebbs/board.cgi?board=tmpgenc&page=4#topic26390

Hello Everybody ..

I'm currently using TmpgEnc create dvd from mpeg "dowloaded" from sat.

My Target is a PAL DVD at Half D1 size (352*576).

I use an AviSynth script to do the following:

1 - Separate the fields of the source video
2 - Crop them and resize them singularly to 320x256
3 - adding a 16 pixel black border to 352x288
4 - Rebuild an interlaced frame 352*576 in size

I produce and Avi File with a lossless coded wich I then
(finally :)) compress with TmpgEnc.

I use CQ at 100% quality 8000 as maximum bitrate 0 minimum bitrate.
VBV size is 40.

During PlayBack the movie shows some sudden gaps in playback.

I read some other posts on this BBS and I think that is the main
cuplrit of this are VBV too small.

My questions are:

1 - Is there a way to calculate an appropriate value for VBV or I
Should just set it to 0 and let TmpgEnc do the job ?

2 - It is better to add the borders to the file or it it better to let
TmpgEnc to center the image and add the borders by himself ?

3 - The resulting Mpeg has a average bitrate of 3500, in other posts
I have read that the minimum bitrate should not be set to 0.
Has anyone some indications of how to calculate an appropriate value ?
Should I also padded it ?

Thanks in advance for any help.
I also welcome any comment on the process used.

320x256 is a bit small for a single field, better resize to 336x280 or 336x276.

VBV of 40 is way to small, set it to 224 for DVD.

CQ of 100% gives you a kind of CBR-Encoding.

Never set Min lower than around 1300 kbps, some Players do not like lower Min-Bitrates.

Never use Padding!

Oh, and there's no need to produce an AVI first, open the AVISynth-Script directly in TMPGEnc.

Thanks for the Info.

I'll raise the VBV size to 224 and I'll run some tests.
BTW. is it possible to change it without re-encodig the video ?


> 320x256 is a bit small for a single field, better resize to 336x280

I choose that dimension because I want to make the borders size a multiple
of 16 which is the MPEG block size.
The resulting size is within the PAL Safe area anyways.

> CQ of 100% gives you a kind of CBR-Encoding.

Do you mean that I sholud lower it ?

> Oh, and there's no need to produce an AVI first, open the AVISynth-Scriptdi rectly in TMPGEnc.

You are right, but at the end of my avisynth script there is a Trim istruction
yhat TMPGEnc. seems to ignore :(

First off, I thought mpeg block sizes were in multiples of 8, not 16, I could be wrong.

Also, I wouldn't use a minimum bit-rate of 0, if I want max quality, I do min and max of 8000 in tmpgenc, because thats the max value, although it is my understanding, DVD format supports up to 9000? Is this not correct?

You're idea of adding a black border is a good idea, I've wanted to know how to do that without simply cropping or letterboxing in Flask. Now I know I can use avisynth to do it. The reason, is becaues the overscan on most TV's is too aggressive, and I have AVI's that play perfect on my computer, but the subtitles, get cut off on the bottom and sometimes at the edge of the screen. So your idea of adding a black border is good, don't assume that TMPGenc will encode and center everything properly, because it will still cut things off if they are close to the edge of the screen on your computer. Some TV's are worse than others of course.

Also, it is my understanding that CQ looks better than CBR, and is smaller too. I haven't been able to tell much difference, because so far I've only been encoding Anime, so the quality isn't super great to begin with.

> First off, I thought mpeg block sizes were in multiples of 8, not 16, I could be wrong.

I found this information on the Avisynth user guide.
I used to make SVCD with the same concept, ie black borders,
so I can use the bandwith for something i will actually see.
The aspect size is sligthly off specs by it is unnoticeable.

During the playback on my TV I only see a small (couple of line) black line in
the bottom.

I will try to set the VBV size to 0 to see if TMPGEnc does it's job. :)

Thanks for your opinion.

> I choose that dimension because I want to make the borders size a multiple
of 16 which is the MPEG block size.

Yeah, that's right, but consider on: You are encoding with half of the full resolution, so 32 Pixels will become 64 while decoding. So it's posible to see black bars at the Sides of your Video. That's why i suggest you to use 336 instead of 320.
336+16=??? 352 ;)

> The resulting size is within the PAL Safe area anyways.

See what i wroth on top of this posting.

> but at the end of my avisynth script there is a Trim istruction
> that TMPGEnc. seems to ignore :(

TMPGenc will not ignore anything in a correct AVISynth-Script. Guess there's some misspelling inside the Script. Oh, and TMPGEnc is also able to do such cuttings/trimmings. (Advanced -> Source range -> cut editing

>I found this information on the Avisynth user guide.
>I used to make SVCD with the same concept, ie black borders,
>so I can use the bandwith for something i will actually see.
>The aspect size is sligthly off specs by it is unnoticeable.
>
>During the playback on my TV I only see a small (couple of line) black line in
>the bottom.

So do you lose any quality, when you add the black bars? Because the AVi's I encode are already 4:3, so if I added black bars, I would be shrinking the video, does that make for loss of video quality, or is it small enough to not really be noticeable?

I would much rather have a slight letterboxing effect, than to have parts of my video cut-off.

First of all Thanks to everybody for answering.

>So do you lose any quality, when you add the black bars? Because the AVi's I >encode are already 4:3, so if I added black bars, I would be shrinking the video, >does that make for loss of video quality, or is it small enough to not really be >noticeable?

I do shrinking the video ideed.
The material I'm encoding comes from Digital Satellite. so it is not always
comply to DVD specs, that's why I have to reencode it
I do shrink the video and I add the 16 pixel border.
The outoput play perfectly on my TV,there is not visible (at list to my eye)
defference from the source material.

>TMPGenc will not ignore anything in a correct AVISynth-Script. Guess there's some >misspelling inside the Script. Oh, and TMPGEnc is also able to do such >cuttings/trimmings. (Advanced -> Source range -> cut editing

I agree, the same script works as expected on VirtualDub, it is only TMPGEnc.
Very bizarre behaviour wich I'm still investigating, there is probably some
problem vith the VFApi plugin.

>Yeah, that's right, but consider on: You are encoding with half of the full >resolution, so 32 Pixels will become 64 while decoding. So it's posible to see >black bars at the Sides of your Video. That's why i suggest you to use 336 >instead of 320.
>336+16=??? 352 ;)

I did not understand the statement.
The width of the TV frame is still the same, there is only less pixels.
The size of 32 pixels at Half D1 is the same that 64 pixels at Full D1.
I do not see black bars, at least in my TV.

> I do not see black bars, at least in my TV.

On YOUR TV, OK. But if i would play your Disc on my TV, than it's an other story. The visible Area of my TV is arround 664x538 (Full-D1 PAL). So the minimum size for Half-D1 is 332x538 without black bars arround the Picture.

Thanks for the info.

I'll try 332x538 as you suggest.

I suggested 336x544 or 336x552

If you are Captureing From Satalite and file use a strange resolution Like 544+480 you can still author it to DVD and it Might work, The program i usually use to Author DVD"s DVD-Lab has features for Authoring non-standard resolution Files Like Satalite TS Mpeg2 streams which Might be something to try ......

Hi,

I have a problem setting Colors with Tmpgenc. I record MPEG2 File from my TV Card with Video Bitrate 9000 and Audio 224. This file i change to DVD which works out Perfect. Now i try to change this to MPEG1 (Non Standard) with Tmpgenc for my Pocket PC (Ipaq H2210). I take following Settings

Video= MPEG1 (Non Standard)
Size = 352x288
Video Bitrate= 600
Audio= 44100/128/ Joint Stereo
With these settings i get the best results for my Pocket PC and the File Size also work out Perfect (110 min Film = 580 MB)

The only problem is on my Ipaq the Colors are very pale like less Red. I tried to change the Red Colors during Encoding MPEG1 (in Simple Color Correction) and tried so many different settings but could not get the better colors. Otherwise the film is Excellent but the colors does not comeup right.
Has anyone a Idea...??

Bye

Well It could be because because your Bitrate is far too low for that Resolution.....

Hi Minion,

When I convert a DVD (with DVD2AVI+WAV) and have the same Resolution which i wrote above, the quality of MPEG1 (after encoding with TMPGenc) is excellent.
This Bitrate i use because i want MPEG1 for Pocket PC (IPAQ H2210).
The Only problem is with MPEG2 File which i Record with my TV Card (Cinergy 400)
and the Quality of this Orignal MPEG2 itself is excellent with 9000 Kbit Bitrate.

Any other Ideas ??

check out this site and tell me if any1 notices anything well weird
http://dvd.vcd.americancdduplication.com/

recognise the screenn shots??? take a close look at the 'mpeg setting' screen shot

is this company in anyway involved with tmpgenc??? if not well ahhh WTF!?!?

If they provided more details for the Video, GOP, and etc. menus, it'd be easier to see. Maybe they just used that one screen? Their first shot did not look familiar at all. Maybe it is fake program to steal money? Or maybe it's a bootleg...

yea the first screen i dont recognise, but the 2nd screen is tmpgenc down to a tee.

alotta gullible people would actually buy this as well at $50 a pop

hmmmmmmm, maybe i should start something like this, i like making money for doing shit all ;-)))))

Hmmmmm, i just tried that page again and its unreachable

2004/01/31 20:01:52 66.225.216.119:80 (unknown.servercentral.net) 10.0.0.1:1064 Port 1064 (TCP)

i block this attempt everytime i try to reach the page (not always the same tcp port)

big brother is watching (well trying to watch) =p