I keep getting errors when doing avi to svcd. It either tells me invalid pointer operation, or write error after the first pass is done, or error at address ....... Please help me. I bought this product a while ago and it has always worked up until now. Thank you.

''Read error occured at address XXXXXXX of module 'TMPGEnc.exe' with XXXXXXX'
that is what i get not error at address, this.

How do you do image captures from a video using the program????

file/output to file/sequence bmp/jpg etc......

Hi!

I want to be able to make short, very low bit rate MPEG movies of family, vacation, etc. for my personal web pages from AVI files imported from my DV camcorder.

In the demo version of TMPGEnc, all the parameter boxes for things like bit rate, image size, etc., that would get me to a low bit rate are greyed out.

Is this because these are disabled in the free demo version? Or are these just information display fields and they can't be set even if I paid for the non-demo version?

I just want to know that I'll probably be able to do what I want before I spend the money on the non-demo version.

The demo version worked just great to produce large, high bit rate MPEG movies, and I will probably spend the money for the non-demo version if I can be assured it will do what I want.

Thanks in advance,

Jim Renkel
james@renkel.name

press the load button and goto the extras folder and load unlock.mcf.....

And there is a Bug in the Newest version that will not allow you to Lower the Bitrate lower than the VCD Standard when Encodeing VCD"s....

I tried usin the software on an older machine sonverting AVI files. It was working fine but taking forever. So I installed the software and gave it a run on a faster Machine and it refuses to load the same avi files?

The only funny thing that I have noticed is that the other machine has an older version of windows media player and can view/play the avi files, the new machine has the newest version Of windows media player with eth latest Codecs and still can't play the AVI files.
Does this have anu bearing?

Can you shed some light on this.

Both Machine are on windows 2000 server sp3

try option/environmental settings/VFAPI tab and raise the priority of the direct show multimedia file reader....

If you Have Media Player 9 get rid of it cuz it will cause Major problems with Codecs and File decodeing...Doing as Lupy said will usually help with Files that will not load into tmpgenc....

Hi,
currently whenever i am encoding avi to mpeg-1 I get the error ''Read error occured at address XXXXXXX of module 'TMPGEnc.exe' with XXXXXXX' at some point during the process, which causes my encoding to stop and the need to start from the beginning again. I am not sure how to fix this and was hoping that someone may be able to explain what i am doing wrong and how to prevent it...thanks in advance

Hello, I noticed some tutorials at VCDhelp.com used TMPGEnc's Project Wizard so I followed step by step. When I clicked on Start to start encoding, in the middle of the screen says "Analyzing". What does that mean? The numbers to the right of the blue progress bar at the top says 0/----- (of course the - means numbers). Does that mean it's only testing?! Because I have just spent about 5 hours "analyzing"...how can I prevent analyzing?

2 pass VBR, right?

Analyzing means that it's going through the first pass to see where it should apply the highest bitrates to achieve the average bitrate you asked for. When it's gone through one pass, it'll do it again for real and the analyzing tag will go away.

Thanks, no wonder it takes so long! But what's the difference between CBR and 2-pass?

CBR is "Constant Bit Rate" Maning that the Bitrate stays the same through the whole File...2-Pass is a VBR method Meaning "Variable Bit Rate" it analizes the file in the First Pass to determine when the Bitrate should be used to Produce the best quality while trying to Achive the average bitrate that you set in the Bitrate settings...2-Pass is Usually the Best quality setting But Not really with Tmpgenc, you can get Just as Good Quality in most cases useing the "CQ"(Constant Quality) setting, which is a Type of VBR setting But it is Difficult to Predict the Final File size...

I'm capturing some of my laserdiscs to burn to svcd. In messing with Raiders of the Lost Ark, I've come across a problem that seems to be a deinterlacing / inverse telecine artifact. On some scenes where there is alot of heavy horizontal lines, the video goes crazy for a few seconds then settles out. A good frame looks like this:

http://www.downtowncomputing.com/good_frame_01.jpg

Note the windows, particularly the cross pieces (muntins is the technical term I'm told).

Now look at a couple of bad frames:

http://www.downtowncomputing.com/bad_frame_01.jpg
http://www.downtowncomputing.com/bad_frame_02.jpg

Note again the windows and also the new jaggies on the desks and other straight edges. It looks nasty when playing the video in real time. It jumps in and out between good and bad.

The original .avi files (captured with VirtualDub using Huffyuv v2.1.1 compression at 640x480) show no signs of problems.

I've found that I can eliminate the problem by changing an Inverse Telecine setting. Under Setting, Advanced, Inverse Telecine, Auto-Setting, the default "deinterlace set threshold" is 300 for deinterlace method of Even-Odd field (field). If I change it to 400, everything seems OK.

Any idea what's going on and why changing that setting seemed to fix the problem? Will changing that cause me any problems down the road?

Thanks,
Steve

These Artifacts should Only appear on your Computer Monitor Cuz The Monitor displays a Progressive Image so it doesn"t Display Interlaced Material Properly..it should Look fine on your TV ...Or you can Just use a De-Interlace Filter..You can"t use "Inverce Telicline" On NTSC Materal...Inverce Telicline Will only work Properly on Material that has Been Previously Teliclined From A Progressive Film Source...

Hi friends,
I have firewire card for my DV camera. Is there any method or peripherals that I can connect my VCR to that card to catch VHS vedio to PC to produce VCDs (without using DV camera). I am new bee to this. So can you educate me how to do it, if it is possible to produce VCDs from VHS thru firewire card. Advance thanks.

Canopus ADVC 100

http://www.canopus.com/US/products/advc-100/pm_advc-100.asp

Looks like the best solution to me. I did the research a while ago, just haven't bought it yet.

Some DV Cameras Have RCA Inputs in them that will let you Plug in your VCR and then it will Convert the analog Signal to a Digital Signal...Or you Can Buy a $20 analog Capture Card to capture from VHS...

Hi, I have a question about playing back VCD's on my DVD player. I have used TMPEGenc to create the VCD's, which playback fine on the PC. But when I play them on my DVD player, every few minutes the sound will go out of sync with the video. Then the playback becomes jerky until the sound is sync'd again.

I am already using a .WAV file from VritualDub to encode with the .AVI file.

I have 1 disk that plays okay, the others are all jerky. Could this be something to do with the 'field order' setting in TMpegEnc ?

Any/all advice much appreciated.

This is the first time Ive used the program, its been strongly recommended.
Im trying to convert an avi file to svcd but when I enter it into the the video scorse after selecting PAL it says format not supported, although its just a standard divx file as far as I know.
Any help much appreciated.

I have used this software for the 1st time. Created a test conversion avi>mpeg2 and got a .m2v file and a .wav file. Please can you tell me how I can use these files or a series of these files to burn my DVD..? am using Pinnacle Express... Thank you for your help

This is a Job for your DVD Authoring program...so read the instructions for your authoring program or go to the Support site for your Authoring program Cuz we aren"t experts in Pinnacle software and this isn"t a Pinnacle forum...

Thank you and sorry for having asked you such question. Nonetheless, can TMPGEnc-2.59.47.155-Free burn a project to my DVD-R..?

Question2 if I may: Why can't I read the m2v file created? How can I?

Thank you your help

You can not burn a DVD with TMPGEnc. It encodes/creates a MPEG file so you can author and burn for instance with NeroVision Express or Ulead DVD factory.

I have used this software for the 1st time. Created a test conversion avi>mpeg2 and got a .m2v file and a .wav file. Please can you tell me how I can use these files or a series of these files to burn my DVD..? am using Pinnacle Express... Thank you for your help