This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
TMPGEnc 2.5 (Free or plus version) BBS [ Sorted by thread creation date ]
Hello,
I am trying to encode AVI capture file into NTSC Film VCD. The file info: size ~35GB, AVI 2.0, codec Huffyv. After loading it into TMPGenc (not so fast but OK) and setting filters (Noise reduction, Inverce telecine, Sharp, Crop, Resize) it goes to encode. First it process Inverse telecine (slow, but working), after TMPGenc goes to actualy encode file and strage things starts - it working for ~30-40 seconds using 100% CPU and after it stops (0-2% CPU) and becomes "Not Responding", after some time it wakeups and load CPU with work again until next "sleep" session. The remaining time become very long and very bad thing it constantly increasing and does not go to end. So anybody knows where is problem and what the solution? The hard drive is fast, memory is enough - so what is wrong?
I can't tell you what the problem is, but may have a work around.
Use Virtualdub to frameserve the file to TMPG. You could also use Virtualdubs filters on the file, (Noise reduction, Inverce telecine, Sharp, Crop, Resize) as I think they are faster than TMPG's filters.
When i convert a DivX codeced movie into vcd , there seems to be this flickering of white lines in the output video. It looks like white lightning or something, and sometimes its even in the margin (if on widescreen. this problem started when i downlaoded the new free version of tmpgenc.. and i re-installed the old version and it now its doing the same thing..do you guys know anything about this.. thanks
Being new to this, I've just used tmpgenc to create a VCD compatible MPEG file. It seems to run ok on my PC. So far so good. Now, if I want to burn it to cd so I can watch it on my DVD player, do I just use something like Adaptec Easy CD Creator and create a data disc (like I do to back up my machine) or do I need other software to make the CD compatible with my DVD player. Thanks in advance for any advice.
You need a program that can burn in "vcd" format, there are quite a few programs for this but "VCDeast" and "Nero" are the most popular, "VCDeasy" is good cuz it is totaly free and it supports chapters, but I use the "ulead dvd plugin" to burn vcd"s cuz it does titles, menu"s and chapters and you can import and introduction video file to play at the beginning of your vcd movie...
I have 2 hd (4.5 and 60 gigs). Im using Premirer 6-Avisynth-TMPEGenc-compressed to MPEG1. I never had this problem before but when i tried the KVCD template i started getting this error. I rerouted all my files to my 60gig hd i.e. TMPEGenc Output File and Environmental setting, for Premiere 6 all files are stored in the 60gig hd as well. After doing this , i tried compressing a 2 minute file again and watch my c:/drive get filled up again. Did i miss anything?
Are you saying that you encode a 2 minute clip and your 60gb hard drive gets filled up????If thats true then that is the first time I have ever heard of this problem...
Did you make sure you set the TMPG temp file output to your 60gb drive.
Also you may need to increase you Virtual memory and/or move it to your larger drive.
I encoded the 2 min clip in the 60gig HD, and change the setting in the environmental settings to store the temp file to the 60gig hd. But when i try to encode the 2 min clip i see my C drive getting filled up, i suppose this is the temp file. Also i still have about 500mb remaining in my c drive. This should be enough for a 2 min clip.
I checked the settings on KVCD and i noticed that the I on GOP is set at 5328,i asked them this they said this does not cause my out of memory error.
I'm having an "out of memory" error as well. Although it seems to be quite a different one, i decided to post it here because it might be related somehow,
I get the error whenever i try to join 2 (or more) vbr mpegs with the included mpeg tools (merge&cut). it worked before but then i must have changed a damn windows switch i don't remember now. i get the error just when the program tries to multiplex the audio and the video stream. when i start the task-manager i can see that it uses up to one GB! of virtual memory before crashing.
Problem sound easy to me, but changing the virtual memory settings had no effect :((
Free hd space: about 5,5GB
File size: 2x600 MB
Fragmentation: 35%! no free space left at hd end! only in the middle of the hard drive.
It still works with smaller files.
Could defragmentation help?
Why uses the multiplexing the virtual memory without showing in the progress bar?
Well, we figure it out what my problem is. It so happen im still using the beta version of TMPEGenc and the KVCD template is designed for 2.0 and up version.
If you have "mpeg4" codecs on your system then you can use tmpgenc to encode to mpeg4/divx, you just load in your file(mpeg/avi/asf/wmv/mov/ect)then go to "file" then output to "avi" then choose your codec then encode that is it,Tmpgenc isn"t licenced to distribute patented codecs but if you allready have them installed then tmpgenc will encode to that format........
I know what Minion and ASHY are saying, however, this may cause misunderstanding...
TMPGEnc itself does not have feature to encode a movie to MPEG-4 format, so you can not expect quality advantage of TMPGEnc I think.
I thought megamind's question means if there is any plan to support MPEG-4 encoding by having its own MPEG-4 engine or logic inside TMPGEnc...
I really do not know if they support MPEG-4 natively, however, I found the sample movie at "List" page is interesting. The average bitrate of the movie is just 1.1MB, but MPEG1 640x480 Filesize : 21.5MB..., this is challenging to the
MPEG-4 standard..., and I hope they impliment MPEG-4 encoding feature inside
TMPGEnc.
What would be the point. I doubt the encoding would be any better, if at all, than the current Divx 5.02 codec, which in my opinion is the best MPEG4 codec there is.
At least when using TMPG to encode to MPEG4, using an external codec, you have the added advantage of it's filters and cropping/resizing ability.
I doubt this will be implemented into TMPG as part of the encoder as MPEG4 is an AVI format.
My point is if TMPG team implement MPEG-4 encoding engine, or if they apply their algorithm to MPEG-4 encoding, I think the quality of movie would be better.
> Filters and cropping/resizing ability
I know these are of course advantages, but this does not affect to quality.
my thing is, I use vegas video, and it dusnt work with divx:(
also i need to store a huge lot of video material on my HD, for use in vegas video.
so I need a small filesize but high quality. divx doesnt work, and since mpeg4 comes close to divx i thought i might use this one. it seems the best filetype for that case, isnt it?
also, its mpeg4. mpeg1 and mpeg2 have their videoCDs compatibility, so how about videoCDs using mpeg4? they would smash the old mpeg and VCD versions against the wall. divx also cant do this, you have to reformat the divx to mpeg1/2 before you make a vcd out of it
Well if you are useing "Vegas Video" you can render directly to a fairly high quality mpeg2 with the main concept mpeg1/2 codec and not have those huge file sizes.There is now way as of now to make a mpeg4 vcd but soon Divx will have there own stand alone devices for playing mpeg4 movies.......
>so I need a small filesize but high quality. divx doesnt work, and since mpeg4 comes close to divx i thought i might use this one. it seems the best filetype for that case, isnt it?
May I ask what you mean by this. Why does it not work? There isn't really much difference between DIVX and MS MPEG4. Both are using the MPEG4 format. DIVX is simply a modified and tweaked version of the original MPEG4 codec and in my opinion gives superior results.
Is it possible to create a picture show CD to be played in a DVD player (like that from Ulead 'DVD Pictureshow')that has a long narration/sound track - BUT that can have the pictures displayed for differing amounts of time to correspond with the narration.
I don't want to create a simple video file as I want to place as many hours worth of presentation on the CD as possible! (I have 24 hours of Powerpoint presentations to put on the least amount of CDs for mass distribution and I want it accessible to people who have DVD players)
Any other options/ideas would be greatly appreciated.
Tmpgenc is basicly just an encoder so any building of files you have to do with a different program(ulead dvd picture show)but if you have the avi file with all the video clips and naration in it tmpgenc will encode it to mpeg but you are trying to get way to much onto a single cd-r, you shouldn"t try to get more than 90minutes of video on a single cd-r and that is with sub-standard quality, and lowering the bitrate to 500 or even 750 might not play on most standalone dvd/vcd players, Most players that play vcd"s are made to handle standard vcd"s with cbr and a bitrate 1150kbs so if you are trying to supply these to a number of poeple then there might be some compatability issues,so I think you basicly want to make a slide show with audio on a vcd, so go check this program out it might be what you are looking for, let me know if it helps. http://www.xat.com/xatshow/
>Tmpgenc is basicly just an encoder so any building of files you have to do with a different program(ulead dvd picture show)but if you have the avi file with all the video clips and naration in it tmpgenc will encode it to mpeg but you are trying to get way to much onto a single cd-r, you shouldn"t try to get more than 90minutes of video on a single cd-r and that is with sub-standard quality, and lowering the bitrate to 500 or even 750 might not play on most standalone dvd/vcd players, Most players that play vcd"s are made to handle standard vcd"s with cbr and a bitrate 1150kbs so if you are trying to supply these to a number of poeple then there might be some compatability issues,so I think you basicly want to make a slide show with audio on a vcd, so go check this program out it might be what you are looking for, let me know if it helps.
>http://www.xat.com/xatshow/
Only one time period for all pics on this one also (xatshow). The company has plans for the next version to be more versitile!
THANKS FOR TRYING
This too creates an AVI file. I can do this with a number of other programs.
I think I really need to retain the Pictures on the VCD and be able to time them to a narration - a timed slideshow. (But I think you get the idea).
I understand you wish to create a VCD. My thinking was that you could create the slideshow, render it to AVI and then encode the whole AVI to VCD afterwards.
There is one more I came across and this one allows you to create a timed slideshow with features such as fade in/out and allows sound, but not narration, but it does allow the slides to be timed with the sound. It would just be a simple case of recording the narration first and then adding it to the slides.
It also encodes directly to MPEG. http://www.iomation.com/products/product.asp?ProductID=flyvcd
Okay, just when I thought that I'd have a BEAUTIFUL movie on my TV screen, now the sound is out of sync. Here are the specs on the AVI file:
Audio format: MPEG Layer-3, 127 kBits/s, 48,000Hz, Stereo
Video format: 576x256, 148263 Frames, 23.976 Frames/Sec. 114 KB/Sec, Unknown format
The file has a name with DVDRip Vite Dix.avi
The picture and sound look great (and in-sync). I cut the AVI file into two pieces using Virtual Dub, I raised the bitrate to 1500, arranged the screen to full screen (keep aspect ratio), and then converted to MPEG using TMPG (I did nothing with the sound-like uncompressing first). When I viewed each file (first half and second half)...a beautiful outcome. The picture was great and the sound was in-sync. I went to play it on my DVD/VCD player and the words are about 2 seconds behind the lip movement. How can that be? Please lend me your words of wisdom if you have an idea on what I did wrong.
So I guess you encoded the file useing the "vcd ntsc film" template?Plus you shouldn"t burn you mpeg to cd-r at a speed more than half the max speed of your burner.So if you have a 24 speed burner don"t burn at more than 12 times but 8 times or less would be better.The fester you burn the more errors on the disk and de-sync can occur...
I'm actually working on two files. The other one was PAL (which I'm not done with yet). This NTSC Film file I thought would be easy but I was having that problem with sound-sync after I burn. I have a 32/10/40x burner and I burned this video at 16x. So I should burn at 1/2 the 32x or 40x?
By the way, getting back to that PAL file I'm working on, the video and sound look to be in-sync. I haven't cut the MPEG file in half yet, though. Am I bound to lose sync or run into problems when I chop it in half? The only software I have to chop MPEG files is ifilmedit. I chop AVI files with Virtual Dub. The NTSC Film file I chopped in half before I converted to MPEG (since I wasn't dealing with any out-of-sync problems).
As far as the error report from Virtual Dub, there were none reported. I did get a message, however, right when I began scanning for errors that said "VirtualDub has detected an improper VBR audio encoding in the source AVI file and will rewrite the audio header with standard CBR values during processing for better compatibility. This may introduce up to 0 ms of skew from the video stream. If this is unacceptable, decompress the entire audio stream to an uncompressed WAV file and recompress with a constant bitrate encoder (bitrate: 128.0 +/- 0.0kbs)."
Is this my problem? Did changing it to 1500 on the bitrate screw it up? I'm lost! Help!
OK, now that could be where your problem is ,your file had "vbr mp3" audio which tmpgenc will not encode so it changed the header so it would apear to tmpgenc that the audio was cbr, but doing this can cause de-sync,It is allways a good idea to extract the audio to uncompressed wav,but changeing the bitrate to 1500 wont affect sync. you should burn at less than half the writeing speed which is 32 so maybe 12-16 times would be good.You can edit your mpeg files with tmpgenc, go to "file" to "mpeg tools" and there is a de-multiplexor and multiplexor and a "merge and cut" that is where you can edit your mpeg file but make sure you choose the proper format from the drop down menu, but for the file that is out of sync you can fix it, load the mpeg into the "de-multiplexor" and separate the audio and video streams, then load your avi file into virtual dub and go to "file" and "save to wav" this will make a wav file now load the wav file into tmpgenc and choose "audio only" in stream type, then encode the audio, now load the video from the mpeg file and the audio you just encoded from the wav file into the "multiplexor" choose the proper stream type choose the output directory then click "run" now you will have a mpeg file with the audio in sync(hopefully)......good luck...ps: you can e-mail me if you need help.......
Just a couple of questions, does the original MPEG actually play in sync on the PC before burning and is only going out of sync only when you burn to VCD and played on your DVD player or is the burned VCD out of sync on both the PC and DVD player.
Also what software are you using and what version is it to burn this MPEG.
I just got home from work and tried playing the disk on my PC and the sound IS in-sync! How weird! It plays fine through Windows Media Player on my PC but is out-of-sync when I play the disk on my DVD/VCD player (through my TV). How do you explain that?
Make sure that you have the very latest version of NERO as some earlier versions can cause this problem with certain players.
If that doesn't help try using VCDeasy or one that has been known to solve this problem is Instant cd/dvd.
Last but not least, be safe and don't burn your VCD's higher than 4x. Many DVD players can and do have problems with disks burned higher than this.
hi, is it true that there is a big output quality difference between tmpgence 2.57 and the rest of the previous versions. Can anyone validate that there is a big quality difference on this version from the previous, if so, then i would want to upgrade to this version.....thank you and have a nice day
I personally haven"t noticed any quality differance with the new 2.57 version, it does seem a little more stable were importing mpeg2 files is concerned.And in the release notes I didn"t notice that there were ant quality optimizations in the latest version but I could be wrong...
I have noticed a huge quality difference, but I am also starting with an MPEG2 source, and as I understand it, the decoder used with 2.57 can be different than previous versions. My only problem seems to be the inability to use the audio gap. Although I might offset the audio by 100ms, it seems to sync it to the nearest GOP.
May I ask why CCE is so expensive compared to TMPG? I looked at their site--CCE SP costs almost $2,000 dollars, while the "lite" version costs $250! eek!
It is so expensive because it is one of the only encoders that supports true multipass encodeing, you can do up to 9 passes with cce ,plus on my system I can encode avi files and twice real time, so a 2 hour movie will only take less than one hour to encode, plus if you know how to use it it will give you unsurpassed mpeg2 encodeing quality, I encode to xsvcd with CCE and the quality is amazing, and you can frame serve d2v files through tmpgenc into CCE and there for use the settings in tmpgenc to encode with CCE..But you are right it is pretty expensive but I guess if you are a persom who needs the multi-pass quality and super fast encodeing speeds it is probably the only software encodeing solution for those specialized needs, the new 2.66 version that is comeing out soon is supposed to be exelent with lots and lots of features, but very few can afford something like that for a hobby...
One of the reasons it is so expensive is because it is a high end commercial encoder and is aimed at professional commercial encoding and production.
You can guarantee that due to the price you will get a high degree of support included.
Also like minion says it is lighting fast and it's MPEG2 encoding is unsurpassed.
I agree it is expensive, but like I say it's not aimed at the ordinary Joe, but more to production studios.
The Wizzard no longer recoginizes .m2v .mp2 extentions, and I had to drag and drop to get the files imported.
Since TMpgEnc is written using Borland's Delphi, I would be very happy to supply a code fix, or even a patch :)
Since it appears that the internal code for drag and drop operation actually parses the dropped file to determine the actual file type, it might be cool to add a *.* (all files) entry to the Openfile dialog's filter property :)
BTW, you sure the "T" is for "TSUNAMI-MPEG Encoder" and not because every Delphi object (and many Delphi components) starts with the letter "T"?
BTW(2), this forum fails to recongise my homepage (www.code4sale.com) in the homepage entry section.
Joe Hecht - Former Borland engineer from the Delphi group and current marketer of many Delphi related projects such as TExcellentImagePrinter, TExcellentFormPrinter, TExcellentDIBLib...
I think you might be missing a mpeg2 codec or something cuz I just went and tried it and had no problem, I just had to chose "m2v" from the drop down menu, I tried it with 2.56 and 2.57 plus...
Recognizing m2v files all depends on the MPEG2 codec you have installed. With version 2.56 the MPEG2 codec I used didn't automatically recognize m2v files, but would still open them no problem using the all files option, but now this seems to have been broken with the new 2.57 version.
I don't know what is going on with TMPG now, it seems that more and more bugs are appearing all the time. Each new version seems to have some sort of issue which wasn't there in the old version.
I don't know if this has something to do with TMPG going commercial now because it seems new versions are being rushed out without proper testing. Maybe in an effort to entice more people into buying the product. If this goes on I think people will start to lose faith in TMPG. TMPG used to be rock solid, but the last few versions seem to have been a bit shaky.
I just hope TMPG sorts itself out so we can once again encode in complete faith with TMPG.
I'm wondering if you loose quality when you convert to an
mpeg of the same resolution as the input.
I've downloaded some VCD res mpegs. But some of them cause
the following warning when VCDEasy/VCDImager scans them for
VCD compliance.
bad packet at packet #33834 (stream byte offset 78488948)
-- remaining 149536957 bytes of stream will be ignored
And a roughly proportional amount of the VCD burn is blank.
I used TMPGenc (with default settings) on one and it now passes
the compliance checks.
Will this degrade the video? I've seen copy-of-a-copy type loss
when converting other resolutions to VCD res., but I couldn't
spot any here.
Would it make any difference if the input was an AVI of the
appropriate resolution? Rules-of-thumb on conversions vs.
degradation would be appreciated.
Any time you compress a source to mpeg there will be some quality loss,It might not be visible to the naked eye but it is there,The reason you are getting "packet" errors in vcd easy is probably because the files are mpeg1 not vcd files, mpeg1 has a different packet size than vcd/mpeg1 and different header information.But an easy way to make regular mpeg1 files into vcd/mpeg files is to just run the mpeg1 file through the "merge & cut" with the "mpeg1/vcd" option in the dropdown menu, then it will rewrite the header information and re-align the packets to make it vcd compliant, re-encodeing the mpeg file will make you loose a lot of quality cuz the bitrate used to make vcd"s is"t very high and not nearly high enough to give you optimal quality pluss re-encodeing the file will make you loose more quality...
I agree with minion. Simply re-multiplexing these files may correct the problem.
If it doesn't then why re-encode the whole thing and lose quality. Just demultiplex the file, cut out the video part which has errors, re-encode with TMPG and the join it back together with the main file and then re-multiplex with the audio. Saves time and preserves the quality of the rest of the movie.