Which is better and why would you have on over the other?

you use interlace on interlaced movies, ntsc movies at 29.97fps are interlaced, and pal movies and ntscfilm files are progressive.....

If you intent to play back the video on a TV you need to intelace as TV works by displaying two fields which are interlaced. If on the other hand you wish to play back only on the PC use need to deinterlace as the PC monitor only displays no interlace video, interlaced video looks torn on the screen as fast moving pictures containing the two fields are displaced on the screen.

Andy

More questions on the same project. The higher bit rate worked nice. But the titles screens (white text on a black background) flicker a bit. Is there any way to clean that up?

That could be caused by the source being "Interlaced" or it could be "Block Noise" or turning up the "motion precition Search" to the slow or slowest setting might help....

Hello TMPEGEnc,

It seems that there's a problem with the AVI export of TMPEGEnc, the volume is much lower on the AVI's than the source files. No AUDIO EDITING was perfomed (ie, normalize and etc)..

TMPEGEnc Version is 2.56

Using other programs, the audio is exported at the correct volume..

Thanks,
George

How can I encode dutch subtitles into my avi file when I'm converting avi2vcd?

Search on http://www.google.com for "sub station alpha".
With it,you can make subtitles for your avi file.
It generates a script which you must indicate to
the subtitle plugin in Virtualdub,and then the subtitles
will be displayed.

Most subtitles can be ripped from the DVD and converted to a format that Virtualdub can use when using one of the subtitle plugins and can then be added to your movie and frameserved to TMPG.

If you don't already have the subtitles there are various sites around the internet where you can download subtitles for most movies and then add them to your movie with virtualdub. These sites also usually have the software and info how to do it too.

ASHY

Check this link out: http://divx.times.lv/subedit

ASHY

http://www.geocities.com/agrgic.geo/sub2ssa.htm

...Bethween TMPGEnc and TMPGEncPRO?
Is it just the help files and unlimited MPEG2?

And another quick question.
I tried to encode a film at around 45 minutes before and it took about 4 hours.
Now I'm trying to convert another similar video, and it suddenly takes 17 hours instead. And it seems it takes that long with the video I encoded before too.
Have I tripped over something in the preferences to cause this?

Don't set "motion search precision"under settings at highest.

I guess you mean "Whats the differance between Tmpgenc(demo) and Tmpgenc Plus"I haven"t heard of a "Pro" version just the "Plus"version.Well the plus version has unlimited mpeg2 encodeing, and a better 2 pass method, and it is faster than the Demo and you get a instruction manual.......

I use Windows default options for a 1024x768 monitor with LARGE fonts.
However, text in several TMPGEnc 2.56 screens is not displayed correctly because too long lines are cut off. Any solution for this (apart from using SMALL font, of course)?
Many thanks,
Ted

What screens does this affect? Using large fonts only affects the actual OS windows eg.active windows, menu options, etc.The actual program fonts are preset so using large fonts does not affect application fonts. I have tried to recreate your problem using extra large fonts, and TMPGENC fonts remain exactly the same except for menu options.

ADEY.

Several screens do. E.g.:

Main screen: "Remaining time" is rendered as "Remaining tin"
"Source position" as "Source positi"

Environmental setting screen: General Tab: 1st & 3rd line are cut off
Canopus DV Codec: 1st & 3rd line
etc., etc.

I could send you screen shots in *.jpg format if you would be willing to give me your email address?

Thank you,
Ted

OK. Now we're getting somewhere! First of all I apologise for not asking which operating system you use.If you are running XP the problem is easily solved,if not,it is a little more involved.In XP there are actually to ways to create large fonts:
1:Go to display properties / appearance /fontsize. (correct method)
2:Go to display properties /settings /advanced /DPI settings. (produces your error. creates 120 dots per inch which also changes size of most screen items.icons etc.)
In windows 98 if you select large font from the "settings" appelet it also increases the DPI to 120. To create large fonts without increasing the DPI of other items, use the "appearance" appelet and select appropriate font size for each individual item in the drop down list. eg."active windows","menus","title bar" etc. You may also need to change the icon spacing setting in this drop down list to accomodate for the larger font.
I'm not too sure about windows 2000, but i'll presume it's one of the methods above. If you need to e-mail me, just click on MAIL next to ADEY at the top of this posting. Good luck,
Adey.

Also appologies to all of you who are saying that this is not really a question for this forum.Of course you are right,and in future I will re-direct to e-mail.
Sorry.

My capture card allows me to save DV footage over the windows 2GB limit with multiple sequenced AVI's. Will TMPG allow me to select these files as group and convert into a single VCD. If not whats the best way to achieve this?

According to the TMPG info it will only accept Canopus or Panasonic and I-O data DV GigaAVI codecs which have been used to create the AVI as sequential files.
If your DV file isn't one of these you would have to use Virtualdub to frameserve the files to TMPG using the 'append' function to join your files into into one.
The insructions on how to use the 'append' function with sequential AVI's is in the Virtualdub help files.

ASHY

Can't load "P3Package.dll"

In the search at the top of this screen type in "p3p package"..

Unbeleivable.

I have 2 questions. Is there an easier way to join a sound and video file without having to encode the thing over again? And i have a video that is set for 640 x 272 resolution.... how do i keep it that way? the first time i tried it it came out stretched vertically because it tried to make it full screen. then i noticed that there is an expert button when setting up the video... i went to the advanced tab and changed the full screen to center (custom size) and typed in 640 x 272... this time the movie came out with the left and right sides completely cut off

You use the "fullscreen keep aspect ratio" setting and the movie will come out looking as close the the original as possible.......

hm, where exactly is this setting? i see aspect ratio with alot of different ratios...

Under settings to "advanced" to "video arrange method" and select the "fullscreen(keep aspect ratio)".....

I have about 25 minutes of video I want to burn to a Video CD. (I am using Roxio Video Pack to create the menu sytem, etc.) I have so much left over space on the CD. I was wondering if there was a way to increase the video quality while still keeping it compatable with all VCD players. The original files where output from Adobe pemiere to a microsoft AVI format using the indeo compression scheme. I have been using the generic Video-CD (NTSC)setting in the TMPGEnc wizard to convert the files to mpeg's. It works great. But can I use the extra disk space to make the mpeg's a higher quality (Forgive the redundancy.) Also which settings are best for output to TV. I have been using 4:3 525 line NTSC (aspect ration), interlaced (Video type) and top field first (Field order). Thanks again.

Yes and No, you definately make it much better quality and have it be complatible with probably 85% of the players(just a guess)that play vcd"s I actually never used a player that couldn"t play high bitrate vcd movies I do mine Really high and they look great,You have 25 minutes of video and a 80minute 700mb cd-r (can hold 800mb of vcd)you can put the bitrate up to 4250kbs and just fit it on a cd-r maybe make it 4000kbs to be safe.To raise the bitrate that high you will need to load the "unlock.mfc" template in the Extra Folder, your authoring software might give you an error saying the bitrate is to high but just ignore it..

I have ripped a DVD's VOB files, and it is too big to fit onto a single DVD-R. I don't want to compress it so I decided to use "Source Range" in TMPGENC Pro to first select the first half then the second half. When I select the first half and try to encode (it selected Inverse Telecine by itself), after the inverse telecine TMPGENC just closes by itself. If I deselect Inverse Telecine and hit "encode now" TMPGENC just closes. What is wrong here?? Thanks.

How are you feeding the "Vob" files to tmpgenc ? are you loading them directly in or are you frame serveing it to tmpgenc?If you are loading them in don"t ,frame serve them from dvd2avi and then you can edit the parts in dvd2avi then encode in parts, I have had problems with tmpgenc at times with the source range or the edit or any feature were the movie has to be displayed...good luck

By frameserving you mean creating the d2v files in DVD2AVI right? That is what I do.

So far I am loving this program. I am new to video encoding. This program makes it easy. It also seems to output the clearest Mpeg video of all the encoders I have tried. I was just wondering if there was some sort of manual. There are so many options and I have no idea what most of them mean or do. I would love to be able to understand what they all mean. Thanks.

Dan

If you click on the banner on the bottom or this page you can download (and or purchase)the "Plus Version" it has a fairly comprehensive explanation of all the features of Tmpgegc in the Help file,and the plus version is better than the demo version but the mpeg2 is only good for 14 days unless you buy it then it"s yours plus you get to have free upgade to the new versions.....