I read a few guides on frameserving files to tmpgenc, and they all said to fire up virtualdub, start a frameserver, save to outfile.vdr, and then load the outfile.vdr as video source in tmpgenc. However this does not work for me, tmpgenc says it's an unsupported format...

what could I be doing wrong here?

- Mike

You need to install the frameserver client first. Read the virtualdub help files. It will tell you how to install the frameserver client.

ASHY

After I have cinverted a movie in AVI formate to MPEG there is no sound in the new file Need help!

Your avi file probably has an unsupported audio format, you need to extract the audio from your avi file with "virtualdub" to a Wav file and use that as your audio source...

Basically these are my problem,
1.) Tmpgenc seems to hang during an encoding session(the file is only 48mins long in play time.) It hangs when it reaches the halfway mark sometimes.

2.) If above doesn't happen then sometimes Tmpgenc will reboot my system when I am encoding a big file(600-680 megs)

3.) I encoded 3 mpeg files using Tmpgenc. All three files are fine and working
I merge all 3 files in to one giant mpeg file. The mpeg file is fine.
I try to split the file into 2 files so one half fits on one cd and the other half on another cd. The first split comes out fine but when i go for the second
split tmpgenc freezes totally. Even after a complete reboot this happens. I try
moving the entire mpeg file to a new drive, same thing happens, I move tmpgenc to another drive, same thing happens.

My machine:
Win98 second edition (unpatched due to reinstall)
128 rdam
Ati all in wonder radeon 32ddr
sound blaster live 5.1
P4 1.7 gig
60 gig maxtor hard drive partitioned into 5 drives (all
vob + mpeg files are stored on a 15 gig drive). The entire drive has recently been reformatted
8x cd burner
16x dvd player

Because of this problem I even tried the following:

Most of anything in my startup is closed prior to encoding
icons in my systray are removed prior to encoding
My virtual memory is set to my entire C drive which is 1.4 gigs.

Same things happen.

The only time that the hanging+rebooting during encoding does not happen is when i encode files that are only 27mins to 35 mins long in play time.

Can someone give me a clue as why this is happening? Has anyone seen these symptoms before? Thanks for any help

Try raiseing your "Virtual Memory", and for the merge and cut use something else to edit your mpeg file cuz the ones in tmpgenc suck most of the times....

Hi!
I got to knoe the merging thing under this BBS and i tried it......
I have 2 NTSC MPEG file and i want to make it into 1 VCD ( they are of 30 minutes each ) the final output is in mpg. I use NERO BURNING ROM to burn the vcd out....
everything works fine.......
untilll.......
I could play the VCD on ALL VCD, BUTTTTTTTTTTT.......
for pionner DVD PLAYER, SMASUNG DVD PLAYER and PHILIPS DVD......
everything is veryyyyyyyyyyyyyyyyyyy choopy.....
Any suggestions?

** if someone knoes ( i m using final cut pro 3 on my mac ) can i export a MOV and encode it using TMPGENC to mpg?

Thanks!
Darence

Try burning the mpeg as a non-standard vcd..and if that don"t work then don"t use Poiner, samsung or philips.....

I would guess that you burned the VCD at a speed higher than 4x. A lot of players will have problems reading VCD's burned at this speed as VCD's don't burn to good at high speed. Try reducing your burn speed to 4x.

ASHY

>can i export a MOV and encode it using TMPGENC to mpg?

Yes, use Bink and Smack fro Radtools http://www.radgametools.com/

Export to AVI and TMPGEnc does the rest.

NB, some MOV files have locked audio which can't be extracted.

Griff

I downloaded and installed TMPGEnc 2.56.39.143. I then tried to use an AVI as the video and audio source. The error message was "can not open or unsupported".

The file was created with a Cannon Sureshot G1. The AVI file plays fine in Windows Media Player 7.01.00.3055. If I right click the file in Explorer and select properties it says:
Audio
Audio format PCM
Average data rate 11.24Kb/second
Sample rate 11.24 khz
Audio sample size 8 bit
Channels 1 (Mono)
Video
Frame width 320 pixels
Frame height 240 pixels
Play length 30.0 seconds
Frame count 450
Frame rate 15.01 frames/second
Data rate 146.855 Kb/second

The web site says TMPGEnc supports all AVI formats that Windows Media Player does. Is that only for output? IOW, does TMPGEnc support AVI files as input?

Stu

Please delete the previous message. I did not read far enough back in the BBS message list.

Stu

I want to frameserve a .avs script to tmpgenc because I read that it can resize faster than tmpgenc's built in resizer. Does tmpgenc use bilinear or bicubic resizing when it makes a VCD?

I beleive it uses the direct show cubic resizer, but I don"t know what you mean by the resizer being slow cuz the resizer doesn"t take any time (if I under stand what you are talking about)it actually takes longer to encode a movie as eg:704 by 480 avi to a 704 by 480 mpeg than it takes to encode a 704 by 480 avi to a 352 by 240 mpeg but then I might not understand what you mean...

When I start to encode avi movie into mpeg it gives me an error message that says -537403781 180576. This keeps on popping up every two to three seconds and I have to click OK. It does encode in between these error messages but pauses when they appear. If anybody can help please reply ASAP!

I have the exact same problem right now. I am trying error protection under the audio tab, and highest quality for motion search percision under the video tab, maybe that will work. Good luck.

I have a few Stargate SG1 divx files with AC3 sound. I have extracted the AC3 sound from the avi file and converted it to a wav file successfully.

When I use TMPGEnc, tried 2.52; 2.53 & 2.54, to convert to ntscfilm there are no files. I usually create a batch file for a few different episodes and leave my machine for a few hours. I do not click the "turn off" when finished option. When I return the program is no longer running has been shut down and there are no MPG files to be found, not even a partial from the first one that started.

I have convert about a dozen episodes in the same manner with no problems until now. I can not figure it out.

Any help or suggestions or questions would be greatly appreciated.

Thank you.

John


System spec's:
Amd xp 1800+
768 MB DDR ram pc2700
MSI KT3 Ultra
PNY Geforce 4400 128MB
3 h/d's 80gig main, 60gid secondary and a 40gig Raid used for video editing.
usually video edit from the 60gig to the 40gig drive.

If it wasn"t for the fact that there is not any files after encodeing I would say that your batch files had the same output file name as each other, cuz if you have your out put file with the same name each movie will re-write the next one, just a thought.....

Thanks for the reply.

I encode my files from one drive to another drive and each file had a different name. i can't understand it. also, Iv'e tried encoding my avi's to m2v & audio to mp2 then simple multi-plex, the work but the audio is out of sync with the video. another puzzle to the question.

Just another question, since you are probably more familiar with TMPGEnc more than I am. avi files w/ac3 sound, what would you recommend doing to convert to MPG2 for SVCD?

Any insight you may have regarding this would be greatly appreciated.

Thanks

Just another question, since you are probably more familiar with TMPGEnc more than I am. avi files w/ac3 sound, what would you recommend doing to convert to MPG2 for SVCD?

Any insight you may have regarding this would be greatly appreciated.

Thanks

Hi, tmpgenc will not encode the ac3 sound so you will need to extract the ac3 to a wav file with an ac3 decoder then you can encode the avi to mpeg and the wav from the ac3 to mp2 with tmpgenc.you could save the ac3 and mux it with the mpeg file but I don"t think any dvd players will play it....

I've tried that. I used virtualdub to extract the ac3 file from the avi, then used headac3he to convert ac3 to wav then used tmpgenc to convert wav to mp2 and convert video from avi to mv2 and then simple multiplex.

I've also tried to let tmpgenc convert the wav with the avi video to mpg2.

Each way the audio is out of sync and I can't figure out what I'm doing wrong.

Greetings,

is there a way to set the compression rate? I would like to reduce the size of the files encoded with TMPG. Thanks a lot for your help.

Thanks

Ste

I don"t really know what you mean by compression rate ,the compression rate is set to the mpeg standard, there are different encodeing modes that will help keep file size down and there is the bitrate this is the biggest factor of what determines your file size , useing the CQ (Constant Quality) encodeing method will give you the smallest file size with the best quality, to change most of the settings you will have to load the"unlock.mfc"template in the "Extra" folder...

in "other settings" "system" I unlocked the "stream type" and set it to "mpeg 1 system automatic". I found that that together with reducing the frame size and the bitrate significantly reduced the output mpeg size

Help, I'm trying out the demo version of this program, don't want to buy it unless it does what I want, and I can't figure out how to create files that will run on my DVD player. I've converted a few files but they just don't play.
Any help would be great, you can email me at JohnnyVomit99@aol.com or just respond to this question here.
thanks

Go to www.vcdhelp.com

ASHY

Who is this guy?
VCDhelp has very comprehensive info how to dreate DVD/VCD/SVCD using programs such as TMPG which is what the guy is asking for...sheese.

ASHY

Who is this guy?
VCDhelp has very comprehensive info how to create DVD/VCD/SVCD using programs such as TMPG which is what the guy is asking for...sheese.

ASHY

Granted no one site is all encompassing, and I myself am a regular user of www.dvd-digest.com, but I find the layout of the site for beginners a little confusing which is why I suggested VCdhelp.
It has an easier to understand approach and deals with people as total newbies who have no prior experience. Which I thought would be more relevant to the original poster and VChelp has exaxtly the info the person needs.
He didn't ask for sites to research just a guide.

So in retort to your jibe about research, maybe you should try reading the posts more clearly before making assumptions of things you know little about as I have probably done more research into encoding over the last 3 years than you have had hot dinners sonny.

Cheers,
ASHY

>Maybe you should do a little research into your spelling.
If this is the line in question 'VChelp has exaxtly' to which you refer, may I just explain that it is not my spelling that is at fault, but my typing. I do not claim to be the worlds greatest touch typist and find that remark rather pedantic coming from ,as you say, someone so distinguished as yourself (hmm yeh right).

Regarding your remarks concerning the fact that it is up to the user to make a choice, then you are absolutely right. The reason why your posts offend me is that I have been using this BBS for a long time now and have seen many 'chumps' like yourself come and go who think they know it all and seem to contradict every post anybody else makes.

This BBS is about helping people and giving incorrect advice doesn't help. The way you make your posts it seems you like to sham the advice of others as you think yours is more relevant. Advice on this BBS should be given in addition to not instead of and trying to throw your weight around by claiming you are such and such a person is just laughable as it means diddly on this BBS and won't impress anybody, least of all myself.

Anyway keep researching and pay a few more visits to this BBS you may learn something from my posts.

ASHY

>Anyway keep researching and pay a few more visits to this BBS you may learn something from my posts.

Hmm, yea you're right ASHY as usual...

Griff

I got problem with my audio by burning DVD with Sonis myDVD. Audio disappear after 80% of movie. I'd like to try NERO.
Now, when I come to burn it onto the DVD using Nero I get these error messages in Nero: Required file VIDEO TS.IFO IS NOT PRESENT and
Required file VIDEO TS.BUP IS NOT PRESENT and
DVD VIDEO FILES Compliance Test Failed
But after TMPGenc I'm getting single mpg.file.
Any suggestion ?
Thaks,Sergey

You need to use an authoring program like "spruce up" or "dvdit" to make the Video.TS folder for you then you can burn it with nero,it is good to author it so you can put chapters in...

Thanks for reply.
So,doesn't mean TMPGenc doesn't create those files for NERO even I choose
DVD settings ? I'm not so happy to use one more software , but if you say there is no other way, I'll try.

Thanks
Sergey

Thanks for reply.
So,doesn't mean TMPGenc doesn't create those files for NERO even I choose
DVD settings ? I'm not so happy to use one more software , but if you say there is no other way, I'll try.

Thanks
Sergey

Thanks for reply.
So,doesn't mean TMPGenc doesn't create those files for NERO even I choose
DVD settings ? I'm not so happy to use one more software , but if you say there is no other way, I'll try.

Thanks
Sergey

If anything Nero should make those files out of your mpeg file,but if you really
want to have a dvd that plays like a dvd then you Should author menu"s and do chapters I even do them with vcd"s and they make watching a movie more enjoyable and whith out chapters how would you skip to the next scene or fast forward or rewind with any acuracy at all.....

Hi Minion
Well last nigth I did some more work.
I found out that I have a problem with Sonic myDVD program - audio disapear after about 80% ov movie. So, I did download Ulead Movie Factory trial version and it's working fine.I'm doing all chapters and no problem with audio.
So,this is just trial version of Ulead and I have Nero yet.I saw explanation in vcdhelp.com how to author DVD with Nero.But my question again about TMPGenc:can I get those files in TMPGenc for NERO without additional software,
Thanks,Sergey

Yes you should but for some reason you can"t, nero should make those files while proscessing your file, but tmpgenc isn"t a DVD maker it is a mpeg and it is up to your authoring software to put it to disk, but if you got dvdit and ulead dvd movie factory then you don"t need Nero cuz they will burn it for you....

I'll find a ulead Movie factory works just fine.
Thanks a lot

Sergey

Can anyone help me please?
Now, I can't browse Mpeg2 file, it can't open or unsupportted. Even I tried every way, re-installed Mpeg2Codec from www.plmovies.com/mpeg2codec_installer.zip or tried to make new VFAPI setting with the Direct Show file reader at 2 priority!

Actually, last week it still worked fine until yesterday, I bought a new Dazzle DVD.Master and installed everything, Boom! my TMPGE could not open MPEG2 from then!!!!!

Thank you in advance
NightBird.

Well to get the program to read the mpeg2 file you would raise the mpeg2 plugin no the direct show plugin, but try this ,de-multiplex the mpeg2 file and load the video in seperately,This works cuz the mpeg2 plugin reads "m2v" files not mpg files......

Thank you for your advice,

I've tried, it still doesn't work!!!! In my idea, I think the XP must be the cause! This afternoon I tried to browse the same Mpeg2 file with another PC (Windows Me). There's no any problem!!! everything runs fine!!!! Well, I think the last choice I would do it is re-install the XP, as everyone knows, it's cost a BIG time to backup everything!!!!!!!!! huuuuuuh.................................................................

any solutions??? please help!

Thank you again,
NightBird.

My 2c worth.
Confilct of codecs. Try and check one thing at a time before you reinstall windows. Like uninstalling codecs or program that came with DVD master.
I had the same thing with Ulead. Once I uninstalled it, everything was back to normal.
Good Luck
Yossi

I would also gues it is Dazzle DVD Master causing the problem. For some reason some other encoding or editing programs can cause a problem with TMPG. I don't think it is down to XP, but as the previous poster said, it is more likely a codec conflict.

ASHY