This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
No matter what I set the priority to, my CPU never shows more than a 75% (total, across all cores) load. Not only that, the CPU speed varies between 800mHz, 1400mHz, 1900mHz, and 2600mHz (according to PC Wizard, from CPUID.com). These correspond (roughly - I think the 1900 is supposed to be 2000, but whatever) to the power-saving states of my CPU.
I've tried changing the task priority under Options, but it doesn't seem to have an effect (I know that option worked when I ran Windows XP, but that was also a different processor).
Has anyone else experienced something like this? I'd like the encoder to be nice while I'm multitasking, but if I'm not using the computer, I'd like it to run at 100% to finish faster.
It's not a help, but I have the same problem. CPU usage is max on 60%. It seems that the application is not optimized for multithread (dual, or 4-core) operation. It would be of great interest if a moderator could comment on this and advise if there are any new versions in the near future which solves this.
I'm running on a HP xw8000 dual Intel Xeon processor 2.8 GHz, 512 KB cache, 533 MHz front side bus with SCSI RAID 2x 15000rpm HDD.
I've noticed that if I just start with my Track Menu page, there is a link for "Chapters" on the first page. I've never been totally sure what chapters are. Do you even need them? I've noticed that I can get rid of the reference if I want to.
very simply put, instead of going to the start each time and fast forwarding to the part you missed etc, you can go to the selected chapter of the where abouts it is.
if you go to the start where you added the file theres the edit tab, go in and on the edit tab within it look down right theres a menu button and i think its the top option, i would noral select the 2 option within that ie the mins selection. i go for 5 mins. it will then scan for every selected chapter section.
Actually, right after I posted this I discovered some revelations about chapters in my AVI's. Basically the ones I have don't have any more than one chapter. I found that out by opening up the "Chapter Editor" That makes sense too because someone else had told me that things like special features, cannot be retained in an AVI, so that would explain about chapters too.
I want to burn several different 50 minute videos to one disc, however I've noticed that, in the main menu, when I click "Start New Project" and add multiple "clips" or "files" that they all just get listed as chapters under "Track 1". Is there any way to make each "clip" an individual "track" instead of "chapter" or how's that all work?
The column on the left side of the Source stage shows your tracks. Click on the "Add a track" button to add another track. Click on a track to select it and add your clip(s). Or you can drag a clip from on track to another.
Got it! That worked out great! So it's kind of designed to where tracks are, or can be the same thing as files or clips, correct? Also... how would I set it up where, say I have 5 tracks...I want my top page to show the track button, then when I click on the track button and go to the main track page, it shows all of the tracks? I don't want separate pages for each track.
Also, I recently had to reinstall TMPGEnc but I never noticed something that may have been happening before. When I loaded up an avi file that was only 808 MB's in size, it showed on the bottom display that it took up 6163 MB's but when I finally advanced to output and set it on single disc, it went back down some. That's normal right?
Also I had a friend that was able to get an hour and a half show and quite a few few 44 min shows on each disc, but I don't know how he did it. In all, he was able to spread out 22 episodes onto 4 discs. One disc had up to seven episodes and the others had less.
I messed around with trying that in TMPGEnc but I was only able to get to two episodes, the one big long one and the smaller one, but they both almost maxed out the capacity. But here again, I know that some of that readout will go down when I set the output...So how do you know how many files you can load up in the Source page and how do you think this guy was able to get all those files squeezed on a disc?
ah right, thats normal due to the time legnth of the footage and also depends on what settings you have it on .
with me ill make it encode to the best it can so in the settings on the left i drop the bar down to custom, and push the average and max bitrate to max and also to 2 pass vbr.
you can then at the end change it to the dvd5 size
So at what point can I customize all that you are talking about? I did find where, in the "Output" menu I can select "Custom" and reduce things there. Is that what you were talking about? Is there some other place you can tweak too? You mentioned something about 2 pass vbr...where is that at?
Also...So in regards to putting multiple tracks and files of this show I was mentioning, do I just take a guess and try loading say, 4, 5 or more episodes, then when I get to the end, once again, select custom and drop down the bitrate?
So I can do the same thing with multiple tracks or files. Just go in there and crank each individual one down some. How do you know if you go to to low a bitrate?
Has any1 had any success with making a AVCHD or bluray disk using tmpgenc4 with spurs engine using H.264/AVC ??? i have had no luck. I tried making AVCHD disks many times but had no luck.. however using premier pro & using the main concept H.264/AVC output it made AVCHD disks fine. And i'm using the same settings for both. I'm getting a bluray burner soon so hopefully i will find a way to use the spurs h.264/avc output to create a compatible bluray H.264/AVC file/disk.
if any1 has successfully created a bluray or AVCHD compatable file/disk using the spurs engine output. please tell me how you did it and what your settings were.
Can anyone help ? The resulting mpegs from TMPGEnc MPEG Editor 3 play fine in powerpoint visually - but theres no sound. Its driving me nuts ! Any suggestions ? Thanks !
Motion looks "ghosty", ie. subjects moving in front of re-coded video are not as clear as on Sony AVCHD player (or Splash Player) playing .MTS files directly. Instead they leave appear with trails.
I've noticed that changing the level makes some difference (slightly better with level 3.1 than 4.1).
My guess is that the ghosting has to do with your framerate or deinterlace settings.
Currently, you're doubling the framerate to 100fps and then outputting as 25fps. I think you should only double framerate if you're actually going to output at the higher framerate (i.e. doubling 30fps to 60fps and outputting in 60fps).
Have you tried "Deinterlace always" (without double framerate) with an interpolation method?
I've tried changing the field order as my first guess. I have tried the default deinterlace always with one method of interpolation. That didn't seem to work either. Slightly concerned about the fact that interpolation will degrade the quality of picture.
I think that it seems like I was getting the framerate wrong. Indeed, I'm doubling the framerate. What the recommended clip input settings would be for 50i mode (I assume that means my videos are 50 frames/second interlaced)?
INPUT:
Clip properties:
Display Mode: Interlace.
Field Order: "upper" field first ( HD is upper fields 'NOT' lower )
Aspect Ratio: Pixel 1:1 (square)
Framerate: 25 fps ( it is 50 fields per second - but the frame rate is 25 )
Filter properties:
Deinterlace when neccessary
OUTPUT:
MPEG-4 AVC (1280 x 720) 25 fps
Level: 4.1 ( 3.1 is for SD resolutions )
1 Pass Constant Bitrate 17500kb/s
Motion Search Range: 256
Detect Scene Change: On
GOP Length: 33 frames
Entropy Coding Mode: CABAC
Motion Estimation: Quarter
I am using TMPEG DVD Authoring 3 and is there a way to delay the activate button for a few seconds after the title page has loaded??
What I have done is:
created a dvd title page that fades in and then the play movie and scene selection fonts fade in..I want to, AFTER the play movie and scene secletion, font has faded in to have the active frame around either of them to then press the play button
This is not possible and I don't believe it ever will be. So why do some commercial DVDs appear to be able to do this? Simple. Their transitions into and out of menus are video files. Usually, you can see when the video ends and the actual menu begins by a slight pause or the text will become sharper, but some DVDs hide it rather well such as the Lord of the Rings menus.
Unfortunately, DVD Author 3 (and Authoring Works 4) doesn't let you use video files to transition between menus. However, it is possible to use the first-play track as a way to transition into your menu when you first insert the DVD.
Why TMPGEnc Authoring Works 4 didn't work on my xp windows computer? Other computer which is vista version works well. Program don't start all in xp windows computer.
well ive had the issue when software starts to mess up or not work, so after doing a chkdsk function and unistall and reinstall of the said software if it still doesn't work right, i normally format and do a fresh os install
works a treat and also allows you to sort your system out to how you wish it to be.
You are probably right. Os reinstall lead to large number software install. Therefore i evade thus alternative. I wonder...how is possibly that three different computer was similar out of order?! Thank you good advice!
When some of my clips are too loud, how do I adjust the volume of them? I found the audio filter and lowered the percentage but there is no different in volume when I play it back. If the difference will only be there after I burn the disk, then I can't really check to see if the volume is acceptable. Same with Normalization. How can I make and hear a difference before I output the project?
Thanks in advance,
Reduce the % a LOT...I never used it to lower the sound, only to increase, and I have to put 250% or 300% UP to have a good normal sound level (using 5.1 to render of course) for a normal downloaded AVI movie...so I think you must try to reduce 50% or even less to get to the point you want.By the way...you will be abble to ear the sound level change on the preview window...go back and change the % if it´s not good enough for you.
If ever you are stuck for a program to view things on on your computer, then VLC Media Player plays every type of file you can every imagine, as for a converter I use AppGeeker, can't go wrong there. http://www.ilikemall.com/how-to/convert-flv-to-mov-mac.html
I have a Canon DV camcoder which records in a 720X480 widescreen format. The native ratio after capture is (1.5). When I Add the clips to the express 4, it automatically sets the aspect ratio of each clip to 4:3, and to get the correct aspect I have to manually set it to pixel 40:33. Everything from there encodes great, but since I like to capture with scene detect and have a tape split into multiple clips, when I convert for projects, I may have to manually adjust the aspect ratio for a hundred clips as each one to the project. Is there a way to automate setting the aspect ratio for all the clips at once?
I think you're gonna have to change the aspect ratio one by one.
I was thinking you might be able to do it through your output format settings, but that will only add black bars to the sides if the clip properties are still set to 4:3.