These would be mpeg-2 & H.264 transport streams.

Some 720p & some 1080i.

Occasionally some TV recordings have weird time sync issues & I'm looking for something I can use to repair them.

I wanted to convert a 720x576 format DVD to a 720x428 format MPEG4 AVC

In "Source" I edited all the 5 clips for the movie to use a crop to remove 74 pixels from the top and the bottom and they showed fine in the program.

In the "Format" I changed the resolution accordingly but the output format is still 720x576, pretty big downer after a 4.5 hour long encode to find out the program screwed up.

Is this a known bug in the free version, or a general bug in both free/paid version? I wanted it to remove the black bars since they take up a lot of space and are useless, especially when viewed in mediaplayer in windows, making the actual movie even smaller when in full screen then when playing the DVD.

Any solutions?

I was just about to buy the full version since I like how it works, but the final trial encode messing up like that is very critical and means no purchase from my side until I have a solution to fix it, so any help is much appreciated.

Same behavior here. I have a registered version of TMPGEnc Xpress 4 and tried different codecs to ensure its not the codecs fault, but TMPGEncs...

I think I found a solution.

In the filter list, select the "Picture resize" filter.

Next, select "Center (custom size)" for Picture position.

Then input your desired output resolution.

In the Encode stage, click on the Preview button to see a sample of how the output will look to make sure it's bar-free.

Actually, I may not be having the same problem as you guys; my output is always at the resolution I set it at in the Format stage.

So your output resolutions are always the same as your source resolutions, even if you change it?

What version are you guys using?

I created a compilation of chapters from few different (non-encrypted) DVD's and burnt it to a DVD (all from the DVD Author tool). When I play the DVD in PS3 with Audio Settings as Linear PCM (under BD/DVD Settings), I am get crackling sound. Feels as if the bass is not getting reproduced properly.

However if I switch the PS3 audio setting to "Bitstream", the audio plays fine and smooth.

Is there any setting in DVD Author that I can tweak so it works fine with LinearPCM mode as well?

Thanks!

You can try changing the audio settings for your tracks to Linear PCM.
In the Source Stage, click on "Settings" for your track(s). This opens the track settings window.
Go to the Audio Settings tab.
In the drop-down for Audio 1 (and Audio 2 if necessary), select "Re-encode as below if necessary" or "Re-encode all as below".
For the audio stream format you can now change it to Linear PCM.

I haven't tested any of this, but it seems like this should work. I'm also not sure how linear PCM audio will work with the bitstream setting on the PS3.

Thanks!

I was sceptical to try the LPCM alternative, as being uncompressed, it would probably have made the file larger.

However upon some more playing around I realized that the crackling was happening because I set the PS3 volume level to max (+2). This affects only the LPCM mode only, as in case of Bitstream the PS3 volume level has no effect. When I reduced the level a bit I wa able to get the sound I was expecting. Actually the base was still somewhat weaker than Bitstream, but that is probably because of different DACs in PS3 vs the Onkyo receiver that decodes bitstream.

My PC Config is-

AMD Athlon Dual Core 4000+
ASUS M2A-VM Mainboard
2GB DDR2 RAM 633MHZ
500GB SATA2 HDD Seagate
Liteon DVD RW

I am using TMPGENC Xpress V.4.4.1.237 for ripping of DVD to MPEG VCD PAL format with default ripping settings.
When I author that MPEG file for DVD with TMPGEnc DVD Author ver.3.1.2.176 with default authoring settings & play the DVD on DVD Players then on some DVD players the Video Flickers.

But if I Author the same MPEG file with NERO VISION Ver.5 then the problem doesn't occurs. The NERO VISION Ver.5 takes long time to author compared to TMPGEnc DVD Author.

What is the reason of the problem.Is there any settings for TMPGENC Xpress or
TMPGEnc DVD Author.

Please Help Me.

My PC Config is-

AMD Athlon Dual Core 4000+
ASUS M2A-VM Mainboard
2GB DDR2 RAM 633MHZ
500GB SATA2 HDD Seagate
Liteon DVD RW

I am using TMPGENC Xpress V.4.4.1.237 for ripping of DVD to MPEG VCD PAL format with default ripping settings.
When I author that MPEG file for DVD with TMPGEnc DVD Author ver.3.1.2.176 with default authoring settings & play the DVD on DVD Players then on some DVD players the Video Flickers.

But if I Author the same MPEG file with NERO VISION Ver.5 then the problem doesn't occurs. The NERO VISION Ver.5 takes long time to author compared to TMPGEnc DVD Author.

What is the reason of the problem.Is there any settings for TMPGENC Xpress or
TMPGEnc DVD Author.

Please Help Me.

Hello I'm new to TMPGenc 4.0 Xpress. First program of this nature I've used. I uploaded a movie left it as it is because I just wanted it to be converted from AVI to Mpeg. However it ran out of space doing the movie because the out put size was 50G!? Is there some way to change that? I mean the original size was only at 700mb. All I did was load the file in and changed the output format to mpeg. any ideas?

What are the attributes of your avi file? Resolution? Framerate? Codec used?

What settings do you see for the MPEG output (in the Format stage)?

That's quite a large leap in filesize, but it's hard to say why it's doing that with so little information.

I have a set of subtiltes (idx & sub ) ripped from DVD.
I read the User Manual that mentioned those messages as below:
List: (Subtitles list)
Contains the current subtitle stream text. Subtitles imported from a DVD-Video are displayed in a graphical format instead of text, so they do not appear in this list.

Import subtitles (I)
Displays a standard file selector where you can choose the subtitles files (*.subtitle) you wish to load in the Subtitles list.

Please tell me how to transfer sub to *.subtitle for TDA, Thanks a lot!

I got it!
Because TMPGEnc DVD Author also supports DVD-Video files (VIDEO-TS.ifo) as input files。
About making a (*.subtitle) file, you can surf this page for details:
http://forums.xbox-scene.com/index.php?showtopic=639697&st=135

Nice find! This is really helpful!

I use both TMPGEnc Express 4 and TMPGEnc DVD Source Creator creating an MPEG2 file from a WMV file. It's OK. But when I use TMPGEnc DVD Author 3, when i add created MPEG2 file it informed: "Could not open the video part of the file. Only the audio part can be opened". The details of the MPEG2 file: MPEG2 Video 720x480 (16:9) 29.97fps 5288Kbps [Video], Audio: Dolby AC3 48000Hz stereo 224Kbps [AC-3]. Thanks for any help.

[Options]-[Preferences]
[Input format list]-[File input plug-in], Plaese check
[MPEG file reader].
Try this! Will be OK!

I have this same problem. I checked on the mpeg file reader as gogo suggested, but it was already checked. Any help would be appreciated.

I'm also having the same problem.

Has anyone got an answer yet?

I've tried GOGO!'s suggestion and it was already ticked (checked).

My goal was to convert AVI file to DVD.
My AVI file is really big (208GB), it's 1 hour 58 minutes movie.
It started analize the file and then it's appeared a window on the screen with the text - Catastrophic failure (error code 0X8000FFFF). I was trying to do the same several times, but every time was the same window with the same text. Can somebody help me with that?
Thank you very much!

when i convert my avi's to mpegs. The final MPG jumps, skips, jerks a bit at certain times. I have the latest version of TMPEG. does anyone know how to solve this problem? I have it set at 8000kps and really need to keep it there, it seems to work at 6000 smoothly but other than that i continue getting the skipping motion in my playbacks of the final mpeg. It worked for a long time and just suddenly began happening. Help me out if you can please. Thanks

I using TMPGEnc 2.524 (Freeware Version) to make movie recorded with fraps smaller but TMPGEnc 2.524 remove all hud ingame so how to set it will enecode to normal video like i record with fraps ?

I would like to setup my menus with the following layout.

Top menu has play and chapter buttons/links.

Then a page of the different chapters linked to the chapter button.

I do not wish to have to select track then goto chapters.

Thanks for your assistance.

So you only want two pages: the top menu and a page showing all the chapter thumbnails?

Just construct your DVD so it only has one track (put all your clips into one track).

Next, you have two choices:
1) Create the menu with top and track menus, select the appropriate layout and it should work as you want it to.

2) Or, select the "Create a Title page in the Track menu" option in the Menu Wizard. Then when choosing the DVD menu structure setting, select "Track menu only".

Of course, all your clips will play one after the other since they are in the same track, but if you don't want to select tracks, then this is your only option.