This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
We are trying to encode WMV format video. Video consistantly lags behind audio. Original has it just fine, once we encode to WMV it lags.
How can we fix it?
It would help if you can tell us your source format, from my experience, AVI container has the most audio sync issue. You have a few options if its AVI,
1. Extract the audio and convert it to WAVE (TXP4 doesn't handle VBR MPEG Audio very well) then import it as your audio source under the clip property when you import the video.
2. Find out how many seconds your video lags behind audio and use TXP4 audio delay and see if that helps assuming this lag is consistant and not progressive.
3. If it is progressive lag then you may have a faster or slower framerate for video compared to audio. This site may help you work out your problem, http://www.gromkov.com/faq/faq2004-0064.html
4. Lastly, if it plays fine for a certain time then starts to get out of sync then your video may have been joined or encoded at separate times which might be harder to fix but do-able, just use VirtualDub to split where the problem is and try to sync it back up then do a re-encode of both parts for a complete file.
It's in the "Cut-Edit" section, to the left of the big Undo button. "Audio gap correction" it means the same as Audio Delay. Type in a negative number to slow down the audio.
I am wondering if there are any plans to add support for HD-DVD sources
(EVO files), and support converting them into WMV-HD? This would be a tremendous feature that would make TMPGEnc product unique from all the competition.
There is a number of us looking for ''one-click'' process to
do HD-DVD to WMV conversion (mainly to obtain Xbox360
compatibility). If you look at this thread on Doom9, the
current process involves 10-12 steps and is highly complex:
This would be an awesome feature but I think you might be asking for too much. Theres a big war going on with AACS copy protection and fair use issues, I don't think it will be easy to have a commercial program get the required licensing to convert ripped EVO files from HD-DVD/Blu-Ray.
The guide doesn't seem all that bad, only 5 steps, the 10-12 steps you mentioned were just a list of software you may need, but for some video enthusiast that ventures into HD probably already have 70% of these software installed on their computer and ready to do the 5 steps to convert an EVO file.
I've been trying to take a divx file and make from it an mp4 video that will play on my ipod. I've tried a few different configurations of the mp4 settings in TMPGEnc 4.0 XPress (Ver. 4.2.10.211), but I always end up with my ipod only playing the audio and not the video. I have a fairly new 80GB model.
Is there a trick to making this work? I'd prefer to use TMPGenc for this, as it's my favored software for all other encoding.
You might want to try ISO MPEG-4 template and make sure to change the output container type to iPod Video with the default settings, this should create an iPod compatible video.
(Experimental) Try using QuickTime template to create a .mov file using H.264 codec, once it finishes encoding, rename the extension to .m4v.
I did some videos to ipod 5.5G h264 and they are played but I don't like the block in scene change. I did a conversion with mainconcept h264 with the same settings and I don't have these blocks. Maybe you are using a old version of mainconcept codec.
Also, you don't enable all options avaiable in mainconcept h264. Can you resolve these problems?
There is a trick to making work. I like TMPGEnc 4.0 XPress too.If you use ISO MPEG-4 not a problem,but when you use MPEG-4 AVC /H264/ you can't transfer video file to iPod via iTunes I don't know why is a maybe some restrictions with iTunes or iPod.
You do video file MPEG-4 AVC /H264/ =Baseline=Level 3=640x480=Average Bitrate 1500kb/s =1 or 2 pass your choise= The other settings are not important.
To transfer this video to your iPod you need Anapod Explorer do the some function like iTunes,then you may need to do some work with the tag.
That is the trick transfer with Anapod Explorer........ http://www.redchairsoftware.com/anapod/featpw.php
You Andre Crespo you did 320x240 with Mainconcept- when you do 640x480-1500kb/s and you transfer this file to iPod via iTunes callllllll meeee.....
I'm having the same problem but ONLY when using the "iPOD Video" container. iTunes doesn't even recognize the file then. If I do normal video, then make sure the bitrate is appropriate on the output, iTunes/iPod/iPhone see it and play it just fine...weird.
My dvd player plays Xvid ,so when i goto a family gathering I like to bering dvd's for the kids to watch ,So I rip the dvd to avi and one set of english sub(some of the older people watch as well) and I hard code them using TMPGEnc Plus 2.5.So i just put the sub pack in the same folder as the avi I am codeing it to and click save as>avi...then i select my xvid codec and i set my audio as WMA V2 @ 128kbps, 48 khz,stereo 15/kb/s(my player only decodes Compression format : Dolby Digital, MP3, PCM, WMA
MP3 bit rates : 32 - 256 kbps and no matter what it freezes at 51%
It might be easier to use TMPGEnc 2.5 for encoding just the video without subtitles. Subtitles isn't supported natively in TMPGEnc 2.5 so are you using a plug-in? From my experience, plug-ins from 3rd party will cause problems so its better to just use the program for what its good at then use VirtualDub to overlay the subtitles and do a quick recompress, all of it should take a few minutes.
Background:
I have a problem with the "Directional Links". I.e. the paths between menu items that control how your selection (cursor) moves when you press UP/DOWN/LEFT/RIGHT on the DVD player.
Problem:
In TDA 2, I activate the display of the links and can see how they change when moving the objects around. The problem is that the algorithm that decides which of the other menu items is the closest (or what the criteria is) is a little too smart. When I have text items of different length it is sometimes impossible to get the paths in a "natural" way.
I have tried different work-arounds to get the text boxes of equal size but that is also problem. If I try controlling horizontal size the whole box scales including the font size of the text. Setting font size back rescales the box.
I even tried to fool it by adding space characters ended by a "hardspace" (ASCII code 160) but that makes it totally misbehave.
Qustions:
Is there a way to take control of these links manually?
Any other hints?
Not sure, but I have found that dual processing seems to fall back to single core, at some point. Having a bunch of files, it starts out with 100%, but then later comes down to about 50%, and the second core seems to be just idling. Not working for the tmpgenc process anyway.
Has anybody else noticed the same? I havent spent much time investigating this, dont know what triggers it.
Quick update - this fall back to single core seems to happen when TMPGEnc moves on to the next file in the list. Testing done with 4.2.3.193. Is there somewhere where I can report this as a potential bug?
Hi there. I downloaded the Trial Version of TMPGEnc4 XPress (Vista upadte version). The problem i seem to be having is when i'm trying to encode a Xvid/Divx file to WMV video/audio, teh audio side of things is just all hiss and crackles.
I've used WinAvi and RiverPast converters with no problems, they just dont have the great options TMPGE has, like output size etc.. Also the fact that it appears a decent bit faster for myself as well.
I just wanted to know if there is a fix i can use or is it a problem with the program. I would buy the full version if i knew this wasnt an issue at all.
My setup is,
Vista Ultimate 32bit
Intel Q6600 Quad Core
4Gig Corsair Ram
Gigabyte GA-N680SLI-DQ6
2x150gig Raptors Raid-0
2xSamsung 500gig
You may want to double check your Xvid/DivX audio file. If its AC3(maybe MP3 too, I haven't checked MP3) then you'll need an external AC3(mp3) decoder or TXP4 won't be able to read the audio portion and you get hisses/crackles.
i've been having this problem for a month now. i don't know what else to do. TMPGEnc never failed any of my files before.
i'd like to convert an avi file to mpg with subtitle.
but everytime i tried, the audio wont come out. but when i did it without inserting the subtitle, there's no audio problem.
what is wrong with it? i've used TMPGEnc to convert many of my avi files to mpg with subtitle before but like i said, it never failed me until this time.
Just wonder why I'm not able to run TMPGEnc 2.5 in WinXP or Vista ? Only can run in Win2k ??? Why converting a 40 min RMVB file takes about 2.5 hours when run in pentium 4 2.4GHz, 512MB RAM pc ??? Any way to make it faster ? Thanks.......