This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
When i select a source file to convert to mpeg (normal avi file, divx video codec, and wmaudiodecoder DMO audio codec) i get nothing in the 'audio file' field, where normally it would automatically list the same file name as entered for video. When i try to manually enter this file, i get a message saying it can no open this file, or it is unsupported. Is there anyway around this?
What codec do I use for XviD MPEG-4? I only have FFDSHOW and FFVFW. What do I need to check off? When I play the movie, it seems fine but in certain points, there are these trailing purple colors. At first, I thought it was a corrupted file but when I viewed it on another computer, it wasn't like that. I'm viewing this in Virtualdub.
Just make sure you don't have any other codecs installed apart from FFDSHOW. Uninstall XVID, DIVX and 3IVX codecs.
Disable raw video decoding in FFDSHOW also and it may also help to disable FFDSHOW when using FFVFW and Virtualdub.
For FFVFW, I have the Encoder at MPEG-4. Bitrate is 900 Kbps. The FOURCC is FVFW. Mode is One Pass - Constant Bitrate. I only checked off XVID.
For FFDSHOW, I checked off XVID, DivX 3, DivX 4, DivX 5. On the Supported Output Colorspaces, I checked off I420, YV12, YUY2, YVYU, UYVY, RGB32, RGB24, RGB16, RGB15. "Use Overlay Mixer" is NOT checked.
Even if I deselect everything in FFDSHOW and then use Virtualdub to play the movie, the color glitch still appear.
Ok, uncheck all the codecs in FFDSHOW. Check to make sure you have no other codecs installed especially from any of those crazy codecs packs which are guaranteed to cock up your system.
Make sure XVID is checked in FFVFW only. Load the AVI into Virtualdub. Now click file information and check the decompressor info. It should say FFVFW MPEG-4 codec.
Also for now make sure that you don't have 'Directdraw acceleration enanbled under 'Options'
Click the second play button NOT the first and check the output. If you still have the same problem then click 'Options' and select 'Directdraw acceleration'
This time click the first button not the second otherwise playback will be slow, but be aware that this will only show the input video.
As a last resort I would disable FFVFW and FFDSHOW and just simply install the latest XVID codec and see what happens.
If the problem still exists then I can only guess there is a problem with the file itself.
Request
Will you send a/some good (x)SVCD templates?
Maybe some good DVD templates too?
And now your at it maybe some (x)VCD templates?
KVCD... been there, tried that. I'm into quality not quantity.
Question
And to the question you don't like Ashy:
How is the complete syntax of a .mcf file?
As you state in other messages, you have posted, if not all, then some syntax.
I've searched for hours now and read hundreds of messages (that you've answered since late 2001) but no hit.
I would like to make some (x)VCD and (x)SVCD templates/wizards for my kid brother, since he is a newbie to TMPEnc.
On page 1 of the wizard I need the ability to choose from CBR/VBR and PCM/MP2.
On page 4 of the wizard I need the ability to select Video resolution, Average video bitrate, Audio bitrate, Media with Auto setting.
I've grabbed some code from a template, but don't if it's the way to do it:
MPEG.WizardAutoChooseList.VideoSize = <
item
MinVideoBitRate = 0
Width = 240
Height = 480
VideoEncodeMode = MPEGVideoEncoder_VideoEncodeMode_Progressive_32Pulldown
FrameRate = 1
AspectRatio = 2
end
item
MinVideoBitRate = 1000000
Width = 352
Height = 480
VideoEncodeMode = MPEGVideoEncoder_VideoEncodeMode_Progressive_32Pulldown
FrameRate = 1
AspectRatio = 2
end>
Templates received. And yes, I've figured out my self to put the templates in same folder and use the same WizardCategoryName and different SubFormatName. In fact I get a sub category by entering 'xSVCD/xSVCD PAL'.
Templates should have been PAL though, my fault. If you read this Ashy and you're in a good mode, plz post some good SVCD PAL templates.
I'm very new to Video Editing. I have Quick Time movie I took with my Digital Camera. The lighting in video is very dark. How can I reprocess the QT movie so it is brighter?
It's very difficult to pinpoint this problem, but I wanted to post this in case anyone else finds it so they know they're not alone.
I am making MPEG-2 files for DVD-PAL with mp2 audio.
I've never had any problem with a file encoded as a CBR but about 1 in 3 that I have tried to encode as VBRs produce a file which plays perfectly on the PC using any media player I choose and I can author a DVD and burn it without a problem. The resultant DVD will play in PowerDVD or WinDVD without a problem. But playing the DVD in a DVD player (I tried several) and the video will freeze occasionally, always at the same points, while the audio continues. The video then jumps to the correct frame after a second or 2.
This is no longer a problem for me because I've given up encoding as VBRs now.
TMPGEnc does not honour it's maximum bitrate setting in VBR and will often produce peak bitrates of 1000 bps more than you specify. So if you are encoding streams with a maximum around 9000, there may be sections that are 10000+ and this will cause standalone player to choke.
You should set the min to 2000 and the max to 8000, under or over that and you are risking choking your player.
I have seen this problem fixed also by dropping the VBV buffer down.
I have used DivX 2.2 and TMPENGenc to assist me encoding a DVD film into VCD using Nero. Nero (version 5.5) shows the disc was burnt sucessfully. When play in Window Media Player version 8 it wont play. A message saying file currently on the CD is CDI , EXT, MPEGAV, SEGMENT, VCD. I opened the VCD folder which revealed non exe files. Oddly enough it will play in Win DVD but not on its own in my DVD rom drive or in WMPLayer.
Have I not done something wrong, do I need some file association to get it work? any advice is mosst welcome
I have a similar problem using WinME (Win95 is fine) and I have yet to get to the bottom of it. What appears to be happening with Windows 98 and later is that Windows detects that the CD is a VCD and locks the files somehow so that they can only be read as a video stream. Media player tries to read the files and so fails, DVD players read the video stream.
It may, however, be something to do with the CD drivers; I gave up trying to solve this a while ago because there's nothing on the www or the Microsoft knowledge base.
Thanks Bob for taking time out to reply, I have solved it! I knew it would play on a DVD software player like PowerDVD or WinDVD but I couldnot distribute these software ( they were big in size) to friends if they wanted to watch my movie. While browsing a magazine which had a cover VCD I read the instructions which basically said if WMP wont play the VCD do the following:
open the drive which has the VCD in it, double click on it, select MPEGAV folder. Left click on this folder, right click on MPEGAV and select open.
The file AVSEQo1.Dat appears, left click it, right click it choose OPEN WITH,
select WINDOWS MEDIA PROGRAM from the list of programs shown. Thats it, you will need to go through this each time you want to watch vcd on Wmp, the image is on the sentre of the screen measures about four inches by 3 inches but the resolution is very clear and there is no delay in speech or motion. I can tell you I was mighty please when it worked.
Of course I will use WinDVD which came with Nero but for all my friends who dont have DVDsoftware player I have written out the 'structions for them to follow. I hope this helps Bob
Just distribute the 'Mediaplayer classic' .EXE with your VCD's or Videolan player.
They can be run directly from the .EXE and will play almost ALL file types.
To play VCD/SVCD in Mediaplayer classic simply select File>Open CDrom and then just select the drive that contains the disk you want to play.
To Open VCD with VIdeolan player click File>open disk then select VCD.
Now I have a new camera (Panasonic DGVX100A)that can shoot in real progressive 25p PAL MiniDV.
I convert in DVD PAL using the your wizard but the result is a little bit jerky video (on vertical lines like "strobo" effect) in the left-right pan of the camera shoots.
How I can avoid this?
Is there a sw that reproduce the 2:2 pulldown of telecine? (Each frame splitted in two field?)
You say you are experiencing interlace lines even though your camera captures to true progressive?
It doesn't sound like your camera is capturing to true progressive at all otherwise you wouldn't be experiencing this effect.
What you are really saying is that the camera actually captures the fields in the same frame hence the 2:2 pulldown. This is not true progressive, however when encoding you should be able to treat it as progressive.
Don't encode to interlaced, encode to progressive frames. The output will be better anyway.
Your DVD player will take care of the interlacing. I always encode PAL streams to progressive frames.
Just ensure you have the field order correct, in fact you should be able to set the input as progressive also and not even bother about the field order.
The camera is the best now, in indipendent production. Some people shoot progressive, edit and mixdown in progressive and then digitally blow up in film 16mm or 35mm (a RGB+y 4 lasers print each frame), winning some Film Festivals.
It is a real bundle!!!!
The question is: how I recognize the exact field order? The wizard tell me "interlaced field order B", but the camera makes a complete frame 720x576 25 times each second without field A or field B.
I' don't know if the DVout file is interlaced or progressive. Probably video out is interlaced but the DV file is progressive. This the reason for the film blow up capabilities.
Do you know in wich way can I avoid the "strobo" effect (left and right pan) in the final mpeg2 file?
My dvd player ( a strong Sony 735d) does'not correct the defect. Only using plasma displays with "100hz or progressive function", the effect disappear.
I would like to make the right shoot in order to give the best quality in progressive and in interlaced.
For sure the image quality of progressive is the best I've never seen. It is comparable to film.
I've tried to solve it creating an AVI (RGB uncompressed, very big file 20Gb) with Motion Blur in Virtualdub, but it makes "trails" (wakes) in the vertical objects.
Do you know any sw that recreate the 2:2 pulldown without artefacts?
However it seems to also indicate that as long as the intended output is progressive there should be no problem.
It seems you are not actually encoding to progressive, but are attempting to encode to interlaced from progressive material.
It seems TMPG is detecting the material as interlaced which in a sense is true as the camera splits the frame into 2 fields but both fields are in the same frame, so for all intents and purposes the file can be treated as progressive. Therefore ignore what TMPG detects and set the input manually to 'Non-interlace' you can then ignore the field order issue.
My advice is to make sure you are indeed encoding to progressive frames.
When using the wizard set the input to 'Non interlace' not 'Interlace' then ensure that the output is set to 'Non-Interlace' also.
You can do this by clicking the 'Expert' button in the final Wizard window.
Under the 'Advanced' tab ensure the 'Encode mode' is set to 'Non-interlace'
I have some AVI files and when trying to encode for VCD, comes up with not supported message and seems to be related to compressed audio
Can someone advise on how to proceed? Thanks
I wanted to know how to create a DVD with biligual Audio file. I demux my TS-Linux File in 1 MP2 file Vidio and 2 oder 3 WAV Files but I canA't import 2 oder 3 different audio files. Did you have an answer for me how to do that.
I've searched through the archive for people's comparisons between motion estimate search, normal and high quality motion search precisions.
I just accidentally encoded a vid using "motion estimate", normally using "high quality", but I noticed very good results and am comparing them with the same vid encoded with "high quality". The source is captured from VHS home movies, and I'm comparing scenese that actually have some nauseating camera motion.
My question is: does anyone have a definite opinion these days that one is better than the other? Is there a general consensus on what to use? I would love to use the faster precision if it got me the same or better, but am also kind of fanatical.
I don't need an explanation of what the various methods do, thanks.
I'll post my comparison results in, oh, a couple hours...