Looking on step by step or any kind of info on how to make a simple 2 page menu in a manner that the 1st page has one 120 sec A/V (looped motion menu) a "Play All" Button and an "Select Episode" button.. Play all of course would play all clips/vids/episodes whatever one may call them & the "Select" Vid/Episode/Clip track etc. button takes me to Pg 2. On Pg 2 there is a 120 sec A/V clip (looped motion menu) & fading in on top of this menu are 4 little motion menus (60 secs vid only - no audio) of the 4 tracks/clips/vids etc. Page 2 also has a "Main Menu" button to take me back to pg 1 or the Main Menu.
Now if I click on any of these 4 little motion menus - only that whole Clip/track plays (with audio) All this I have done BUT the ONLY trouble now is that if I select any vid from Pg 2 it continues to play the every vid till the last one & then returns to Pg 1 ie: main Menu. What I would like to know is how to make a selection from pg 2 so that only that vid plays & after it ends the 2 pg appears...so I can either select another vid or go to Main Menu to Play All. Been trying to do this since Nov 19 & have searched the net to no avail.

Any help would be really appreciated as now it is over 30 days & I have exceeded the return window.

What you can do is create a Title page.

Make sure each separate video is registered as a separate track in the Source stage. If all of your videos are in the same track, they will just play one after the other like you described. Use the "Add a track" button to add tracks to your project, then add an episode to each track.

When you get to the Menu stage, you have to choose to create a Custom Menu and click "Next..."

The next screen should be the "Menu structure mode settings." Choose "Structure the menu in standard mode" and check the "Create a Title page in the Top menu" option. Click "Next..." when finished.

Next, layout your menu as you wish. Your Top Menu should have multiple thumbnails since this will be your episode selection page. Click "Next..." when finished.

Next is the "DVD menu structure setting" page. You will need a Top menu, but I'm guessing you won't need the track menu unless you want to see all of the chapters of an episode. So you would choose "Top menu only" or "Top and track menu." Click "Next..." when done.

Finally, we have the "DVD playback settings." Here you should choose "Display the top menu" for the DVD insertion action, and "Display the top menu" for the playback end action. Click "OK" when done.

And that's basically it! If you chose not to have track menus, it will be a 2 page menu almost exactly as you described. Unfortunately, after track playback, it will always go back to the 1st page (the title page) and not the episode selection page (top menu).
If this doesn't work for you, I think your only other option is to not have the title page and only have the episode selection page (top menu). Then it will always go back to the top menu after an episode is done playing.

You may have to alter some of the buttons to get the text you want ("Select Episode").

Im using a trial version of TMPGEnc Xpress, there's an filter option (under resize) to set a mask using the color of your choice. This is great for getting rid of overscan noise at the top of the video i'm using to create a 16:9 DVD.

My question: I'm looking for the same filter option for the application that I bought, which is TMPGEng DVD Author 3.0. I bought this application because I want to create a custom menu and more for my DVD. So, does DVD Author 3.0 offer a the same resize (and mask) filter? If not, are there plans to add this option? DVD Author would be the complete package for me if this option was available in it.

I am looking to purchase TMPGEng DVD Author 3.0. However, I have experienced several problems in the demo version. I am most frustrated that I am unable to play individual chapters. Once clip 1 starts it goes to clip 2, then 3, etc. No matter what I do it will not go back to the main selection menu. How have you been able to overcome this? Thanks for your response.
Peter

You can't just play one chapter and then have it go back to the menu. What you want to do is make each chapter into a track. Only tracks can have the option of going back to the track menu or top menu after playback is finished.

Also, this only applies to DVD's and not DivX projects. You can change the settings for the menu in the "Global DVD menu settings" or via the Menu Wizard.

I am a NewTek SpeedEdit user. NewTek has an AVI wrapper that works with your TMPGEnc 2.5 version. I am interested in buying the 4.0 version but want to be able to run the 2.5 version also. Does a single license for 4.0 cover 2.5 as well?

You could try downloading the trial of the TMPGEnc software to see if the AVI wrapper will play nice with version 4.0 as well as 2.5.

Having 4.0 will not disable 2.5. I have liscenses to both. The 4.0 liscense was an upgrade. 2.5 did not stop working.

XPress 4.0 and 2.5 are considered two separate products. If you want to use both, you will have to purchase both products.

Also, purchasing 4.0 Xpress does not entitle you to 3.0 XPress.

It seems to me that tmpenc doesn't allow 4:2:2 to be created conforming to the 422Profile spec.
The spec. clearly allows for up to 720x608 and bitrates up to 50Mbps - but Tmpgenc 2.5 plus complains that the bitrate is too high if it is set above 15Mbps in this profile - and this is incorrect.
A properly formatted SD NTSC Broadcast Mpeg2 should be 720x512 422P@ML (32 line blanking interval + 486 active image area), and allow for bitrates up to 50Mbps.
Also, to properly incorporate a 720x486 active area onto a 720x512 full-field Mpeg2, Tmpgenc needs to allow the user to position the original 720x486 (or 720x480) into the correct position in the final output - right now you can only center the image or squeeze it to fill the whole fram - but what is needed is a way to position it so that the first line of a 720x486 original file can be placed at line 26 of the 720x512 result - (or for 720x480 it needs to start at line 32)
I see no way in Tmpgenc v2.5 plus to do this. Is it possible with tmpgenc at all?

Here is the spec. for 422profile:-

4:2:2Profile@MainLevel
Abbreviation: 422P@ML
The goal of 4:2:2Profile@MainLevel is to be suitable for application in the TV production environment.
So the performance, in terms of video coded quality, is expected to be better than MainProfile@MainLevel. Furthermore the 4:2:2Profile should provide good performance also when several coding and decoding processes are necessary, but the number of generations should be kept limited, as the MPEG compression techniques are lossy.
The main removed limitation on the profile side is the chroma_format, 4:2:2, that gives the name to the profile, is possible and it should allow chroma key effects for the decoded images. Besides also the Intra DC precision may be improved (till 11 bits).
On the level side the most important increased parameter value is Maximum Bit Rate, 50 Mbps, that allows a good picture quality even with only Intra_pictures, so that applications that used Motion-JPEG compression (non-standard) can now use an MPEG-2 standard profile.

Level Table
_______________
B-frames
YES
chroma_format
4:2:2
or
4:2:0
scalability
NONE
Intra DC precision 8, 9, 10, 11 bits
______________________________ ________________
Maximum Bit Rate
50 Mbps
Buffer Size 9437184 bits
Sample Density 720 samples/line 608 lines/frame
30 frames/s
Luminance Sample Rate 11059200
Horizontal Vector Range -512:+511.5
Vertical Vector Range (frame pictures)-128:+127.5
Note:
Compared to MainProfile@MainLevel the number of lines/frame has been increased in order to include some lines from the Vertical Blanking Interval.
The maximum value of Luminance Sample Rate is lower than the simple product of the Sample Density values because the frame size 720x608 is used for 25Hz countries, while in 30Hz countries the format is
720x512.

Hello,

When a DivX video has been authored,
I understand that it needs a DivX Ultra certifed player
to be able to see/experience the menus.

But, will such an authored video play at all on a non-Ultra player?

or, will it just play like a regular video,
but obviously without menus?

Thanks for answering my beginner question :-)

Yes it will just play the video itself.

I just installed 2.5 plus and the silly thing loaded one time. Now, every time I try to call the program, the .exe file shows up as loaded in task manager process but does not show up on screen or in the applications window of task manager. When I shut windows down it comes up asking me to close 2.5 plus, which I cannot even see is running.... this is very frustrating. Any help will be appreciated. BTW, I have uninstalled it, cleaned the registry, reinstalled and same problem. After it asks for registration, it disappears.

Hello,
I would like to transcode MPEG-1 from MPEG-2 and simultaneously insert a visible image watermark on the MPEG-1. Does any of your software support such a feature?
Thank you

I guess this is still not supported but they may hear your voice some day.

good luck

I'm using TX4, but the TX4 forum seems to be gone.
I have an mp4 video, H.264 (3GPP).
When I open it with TX4, it's reading the video size wrong, and when I try to encode, it takes forever, just to encode a few frames. If I left it running, my great grandkids, would probably still be waiting for it to complete.
I tried disabling the Quicktime reader, but then nothing happens.

Any ideas... or is this just a bug?
I sometimes have the same problem with mkv files.

Thanks for any help!!

I'm having trouble with the authored disc playback. the MPEGS are all fine when you play them on a PC and the authoring process works and a disc is produced, but on playback there is digital breakup of the image just near the end of each chapter, This has not always happenned always but is happenning all the time recently. the whole image pixelates right at the end. Has anyone experienced this and does upgrading to version 3 solved this for anyone?

I am unable to encode avi to DVD with your product and still maintain lip sync. please advise .

I've just started using DVD Author 3 I have created a project with page 1 welcome screen, page 2, 6 chapters for 6 clips.
1. How do you get only one clip to play
2. How to at the end of the clip to return to page 2 (it currently goes back to page 1).
Thanks

I just paid $89.95 for the retail version of DVD Author 3. First I had to BUY the software on line and then a page opened with the serial #. Then I had to copy & paste that into their webpage so I could download the software. Then I installed it and they said to restart my computer, which I did. But, then when I opened the program, they again asked for the serial #, but once I restarted my computer, that page of course dissappeared. I checked my email, but they never sent the serial # there. Now I'm out $89.95 and they are impossible to reach. What do I do?

شماره سریال نرم افزار TMPG ENCODE DVD 3

SERIAL FOR TMPG ENCODE DVD 3