This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
Please stop making this program and TMPG DVDauthor for use in 1024x768 resolution and above only, it's very annoying!
ALL software should be able to work at a resolution of 800x600. Please sort it.
Are you serious? 800x600? That is very low-res for today's standards. Get yourself a new monitor. Even a $30 used one from Goodwill, will do 1024x768. I used to run my 15" monitor at 1024x768. My 19" .24dp Sony Trinitron, I run at 1600x1200.
The windows should be resizeable, because right now, on my 1600x1200 desktop, their software has a small window. There is no way to make it full screen! I think the "Pro" version allows you to resize the window.
Of course I'm serious.
For those people that don't have 20-20 eyesight anything higher than 800x600 is just a pain. Everything is just too small to see.
It could be made to work in both modes no problem. Other software developers manage it.
A lot of people I know use 800x600 not 1024x768. The program justs need a little tweaking and it should be satisfactory for both modes or at the very least it should have resizable windows.
I annoys me to have to keep changing my resolution every time just to use the damn thing.
Oh and there is nothing wrong with my monitor I just don't like having to press my nose to the monitor to see anything.
I'm with Ashy. The resolution of the finished product (DVD or VCD) will not suffer just because the program resolution of your PC monitor is 800x600. If they keep increasing the screen parameters we'll eventually be looking at individual pixels (If we can still see at all). I'm only guessing here but I think Kojo is under 40 and Ashy is over 40 (like me). Computers have already diminished my eyesight and I'm not going to strain to see anything anymore.
I'm having the same problem; No Audio. I've tried converting to one .mpg file and I've also tried converting to the video and audio as separate files, but the .wav file doesn't have any audio in it either! I've tried different sources of the same thing I want to convert and same problem. I've had more success with much smaller .avi files, but working with the size of a 1 hour TV episode seem to be giving me a lot of trouble.
I've been having some really weird problems with my TMPG. I've been using it for years now and its been working fine, but now when i finish converting all I have is video and no audio.
I'm not sure if i accidentally deleted a codec or program or something that is essential for avi audio conversion, or if my priorities are wrong...
I have the same problem, on the second page of Project Wizard audio fiels from .avi suddenly stopped opening, only video (when I try to browse it separately from the same file there's an error - audio can not be opened or is unsupported, Windows Media Player can read the audio so it's supported). I've tried to convert again some files I did a few days ago and it also doesn't work. Anyone know what to do except reinstalling the system???
I just encoded an Mpg-2 from an avi file. It is much larger than I'm used to and at this rate I could only fit about one hour on a DVD. I'm used to fitting about 100 mins, using AC-3 without shrinking. What settings should I use it order to get that kind of file size? I see I can limit it to a bitrate of 8000, and I could change to 8 bits, but how will that effect quality? Thanks!
You'd be better off using VBR not CBR. However you can reduce it to 8000 no problem. In fact that is what it should be. You could go even lower to 6000 with no real noticable loss in quality.
I want to let you know the capacity of DVD is not 4438MB. The correct DVD capacity is about 4482MB. DVD Author and the writing tool use wrong capacity. To get around this issue, I have to choose "ignore" and use Nero or another burning tool.
Please fix this issue for DVD Author Pro 2.0 version.
I can't download the installer because the link on the pegasys-inc.com website doesn't work. I am sent to an error page saying:
"The page cannot be displayed.
The page you are looking for is currently unavailable. The
Web site might be experiencing technical difficulties, or
you may need to adjust your browser settings."
Anyone know if this is caused by a problem with the website?
Thanks in advance.
It depends on what container format is being used. I'ts very hit and miss. I've tried to get this format to work myself, sometimes successfully sometimes not. Downloaded many different H264 codecs trying to get certain files to work.
Tried it, just can't get FFDSHOW to work with them. The current version is buggy anyway.
Each H264 seems to differ depending on who made it and what encder they have used. I've managed to get some files working using one method and certain codecs, but then some others just refuse to work unless you can find the right codecs and filters.
It's far to mish-mash at the moment for my liking and not very standardised at all. The protocols need to be tightened up.
My H.264 file is MP4 (High@L3.1). By installing ffdshow's h.264 support, I can actually open it in TMPGEnc...only to get a constant black image. So it doesn't really help me.
I would like to use an mpg (MPEG-2) file from my capture software as an input file to TMPGEnc. There aren't any MPEG-2 Decoders in my list of VFAPI plugins under environmental settings even though I have several players which would have put the plugins in my system (that is, I can doubleclick on the mpg and it will play in Windows Media Player.
Purpose is to capture at highest quality then shrink with TMPGEnc, rather than capture at low quality, which I think gives poor results. Also want to color correct and edit, too. My capture software puts out MPEG2. (Sonic MyDVD, came with the Adaptec capture card).
Error message is:
File "F:\cap.mpg" can not open, or unsupported.
I split the file using the MPEG Tools menu into M2V and MP2, and it cannot open the M2V for source either. Ironic that TMPGEnc is unable to read its own output. Any suggestion to get VFAPI table to include Decoders which are installed somewhere on my system? Some "How to use TMPGEnc" sites feature a screenshot of this menu with several MPEG-2 Decoders listed.
Any suggestion for a program which will turn the MPEG-2 file into another format (lossless uncompress to AVI, etc) which TMPGEnc could then open.
if tmpeg is properly set up , it can import mpeg1/2 files with mpeg2 audio assuming ITS NOT A VOB!!!!, so check yourr setup and make youre your capture card is captureing it properly, tv card are notorious for goofing wht the GOP so if that is the case ,capture to xvid/wav first then encode with tmpeg
I have gotten emails about how to do this if either (a) the mpeg-2 stream is whacked or (b) the audio isnt a mpeg-layer II or wav so try it and emial me your replys
tmpeg 2.x can't open up files with a ac3 stream so if your file has this , follow the rest of this, if it doesnt , and it still fails this will work as a workaround also
1: feth dgindex and vfapi from the net and set them up
2 install vfapi before doing this or else tmpeg will not use the d2v files
3 open up you mpeg-2 stream (wehter it be vob or mpg) in dgindex
4 select the audio output to decode the trac to wav (don not demux it) 5 select save project and let it go , when its done youll have a wav file and a d2v file
5. open tmpeg an import the video souce as the d2v file, it this doesnt work go to step 5a
(5a) open vfapi, input the d2v file and have it save it , the output will be a 12MB avi file with no sound, then hop in tmpeg and import the avi file as you source
6 import the wav as your audio
7 assuming you know how to use tmpeg, set you setting ans savie ti as a mpeg-2 ps
It has come to my attention that the recent builds of FFDshow (2005) + TMPGENC
do not work together!
When you have installed FFDshow the decoder is unable to open any AVI file through DShow.
What works really well is AVISynth ( http://www.avisynth.org/ ). I made a simple script with the DirectShowSource filter and loaded it through TMPGEnc and it was good as new.
You might want to tinker with it though, I haven't tested it all the way. All I know is that it works.
Alright, assume I have a .AVI file and a .SSA softsub for it. Is there a way, with this program or another, to permanently apply those subtitles before converting?
i'm trying to convert some avi files into mpeg so i can stick them onto a dvd but after a few minutes of encoding the program just closes itself down with no error message.
Does anyone have any idea what might be causing this ??
I'm no expert, but I've found the same problem when I set the task priority to High in options. I suspect that you are demanding too much of your CPU. Perhaps try closing any applications that are running in the background. Make sure priority is set to normal. If that doesn't work, I'm afraid I don't have any other answers. Hope this helps.
Using Tempc 2.5. When doing AVI to MPEG conversion (the only thing I'd need this tool for) I end up with separate *.m2v and *.wav streams, but no final mpeg. I guess the mixing of the two is called multiplexing, right? Any ideas why I don't get a final mpg? Thanks in advance.