Pegasys Products BBS

Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.


Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 292 / 983 ]   Next > >>
Classify Product Title User name Reply Last update
Question TE25 muxxing don't work ?? BX-8017 1 2005-02-17 21:07:41
Question TE25 vob chapters nablus 1 2005-02-17 21:03:01
Question TME1 Hiccup in MPEG - how do I bypass it? TheShrike 1 2005-02-24 09:45:12
Question TE25 Tmpgenc fails when loading avi Giroux18 1 2005-02-25 13:41:26
Question TE30 very new to video emoore2020 2 2006-11-15 06:22:59
Question TE25 Problem with every "mpeg-->avi-file" mki 7 2005-02-20 23:09:26
Request TE25 Trying to make a VCD to play in home DVD player craig 3 2005-02-20 19:29:53
Question TE30 XDVD Bitrate Issues cgulka 0 2005-02-15 15:26:10
Question TE25 Making my mpeg2 smaller Monkey 2 2005-02-16 18:54:43
Question TE25 error message KED 1 2005-02-16 09:00:55
Question TDA1 Missing P3Package.dll kle1 0 2005-02-15 03:49:35
Question TDA1 How to make minor change in authored DVD? djohn 1 2005-02-27 05:30:40

Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 292 / 983 ]   Next > >>
Question - TE25 - muxxing don't work ?? No.42896
BX-8017  2005-02-17 18:16:40 ( ID:vqg.440x5uc )   [ Delete / Reply with quotation ]

Hi,

a 1000 times I used befor the mussing funktion of tmpgenc plus without any problems.
Now I have the following problem: I want to mux an mpeg-2 video file (an original stream file from digital TV) and an ac3-audio file (I streamed video and audio seperately because that's the only way for me to get the ac3-audio, if different audio-streams exist)

With the funktion "simple multiplex" it say "illegal mpg video/audio stream"
with the funktion "multiplex" tmpgenc does nothing without any notice but the list of stream stay empty.

I don't understand this. The files are correct! the ac3file I can play with the WMP.
I made the many times before with the same kind of streams. Why this doesn't work????
can anybody help, please !

Best Greetings
BX-8017


ashy  2005-02-17 21:07:41 ( ID:k9h6gdv/wof )   [ Delete / Reply with quotation ]

Try loading one at a time into the multiplexer, not the simple multiplexer and see if TMPG can read the headers of the files.

If it can't read the headers of one of the files then there is your problem.
However if it can display the header info of the files then try running just one or the other of the files through the multiplexer to see which one gets rejected.



Question - TE25 - vob chapters No.42894
nablus  2005-02-17 14:08:22 ( ID:th4japiu8rm )   [ Delete / Reply with quotation ]

I am running vob files through TMPGEnc without any problem unless the file contains chapters. Then TM processes only the first chapter and ignores the rest.

Im sure there is a simple solution but I cannot find it.

Thanks so much for any advice


ashy  2005-02-17 21:03:01 ( ID:k9h6gdv/wof )   [ Delete / Reply with quotation ]

The simple solution is 'DO NOT' run VOB files through TMPG.
VOB files are NOT simple MPEGs. They contain other components that could affect the encoding.
For instance you cannot select the required audio track with TMPG.

The tried, tested and best way to encode VOBs is to use DVD2AVI as frame sever.
Simply open the VOBs with DVD2AVI, select the required options, audio track e.t.c. and then create a project file.
After a few minutes you will have a compatible file to load into TMPG.



Question - TME1 - Hiccup in MPEG - how do I bypass it? No.54343
TheShrike  2005-02-17 03:37:32 ( ID:m7e4o8b6rsl )   [ Delete / Reply with quotation ]

I am trying to split up an mpg file. However, there is an error in it, and TMPGEnc wont do anything past the error. I am trying to cut out a certain portion of it, but all I get is the first 24 seconds, before the error in the mpg. How do I bypass this error, or fix it, so TMPGEnc can cut the file?


B_Racer  2005-02-24 09:45:12 ( ID:0jd4rmr3tyn )   [ Delete / Reply with quotation ]

Use the JAVA-Program ProjectX to correct the Stream.



Question - TE25 - Tmpgenc fails when loading avi No.42892
Giroux18  2005-02-16 17:22:22 ( ID:a5z7vys9cv6 )   [ Delete / Reply with quotation ]

I'm trying to convert an AVI to MPEG, so i can put it onto dvd, but when i load the avi, TMPGENC fails on me. I can play the file in a media player, such as windows media, and divx, but why is it failing when i try to load it? I've reinstalled all my codecs, and have restarted me PC many times, anyone know what i can do to get it to work?! Thanks in advance.


aldaco12  2005-02-25 13:41:26 ( ID:oqc/f/b5mok )   [ Delete / Reply with quotation ]

Nope. And what happens if you open the video with VirtualDub and, just for tamporary file, you compress it with Xvid codec set at maximum quality (AS @ L5 and maximum quality)?



Question - TE30 - very new to video No.53403
emoore2020  2005-02-16 02:07:47 ( ID:jr4rgeb287m )   [ Delete / Reply with quotation ]

when i select an *.avi file for converting, i get a message that the file "cannot open, or is unsupported."

any typical things i'm forgetting to do?

thanks


Bojo  2005-02-28 07:47:56 ( ID:9jtuinwmf8g )   [ Delete / Reply with quotation ]

That error message usually means that TMPGenc can't find a codec to decode the audio or video. Sometimes this occurs when the AVI file uses an older "Video For Windows" codec instead of the newer DirectShow codec. Your best bet is to use another program to transcode the file to another encoding before using TMPGenc to convert to MPEG.


asim prabhu  2006-11-15 06:22:59 ( ID:t1au8zjoeg2 )   [ Delete / Reply with quotation ]

IN ENVIRONMENTAL SETTING>VFAPI PLUGIN set higher priority for the respective codec go by trial and error. Restart TMPG every time till you get to see the video.



Question - TE25 - Problem with every "mpeg-->avi-file" No.42884
mki  2005-02-15 19:53:32 ( ID:xho82zh7up. )   [ Delete / Reply with quotation ]

Well, first of all *sorry for my bad english* :)


Im using TMPGEnc 2.521.58.169 (core 1.98.152)

everytime I encode my mpeg-file I get an error at the same position.
every player just stops playing every file at 01:07:40.

The Mpeg-files are always between 0.9GB and 1.3GB (about 1.5 hours)
(MPEG-1 640x480 25fps CBR 1150kbps, Layer-2 48000Hz 128kbps)

The Avi-files have a size of ~500MB
(AVI 640x480 25fps CBR 1150kbps, Layer-2 48000Hz 128kbps)

(I know 640*480 not a standard resolution for videos but i watch the files on my computer, so it should be ok, right?)


Well the problem is no matter what i do it always stops the *.avi at 01:07:40 while the mpeg-file doesnt stop at all. I have tried about 10 different videos, everyone stops at the same position so i don´t think it happens by accident.

Can anyone help?


ashy  2005-02-16 08:47:44 ( ID:k9h6gdv/wof )   [ Delete / Reply with quotation ]

First of all, can I just ask what is the point in re-encoding the AVI's at all?
As you say the resolution is not standard and won't play in any other player then the PC.
If that's the case what's the point in craeting an MPEG that will have reduced quality and be twice the size? You may as well just watch the AVI.

Ok aside from that I need you to explain what you mean by saying the file stops playing.

Do you mean it actually ends at that point or does it just freeze on the last frame or do you mean it continues playing, but still shows the same frame?

Have you checked to make sure you don't have your source range setting to end at 01:07:40?


mki  2005-02-16 15:59:49 ( ID:u1gjpk3cjuw )   [ Delete / Reply with quotation ]


What do you mean with "reencoding the file"?

I use a dvb-s card to record mpeg streams and then i encode them to avi
(with Xvid Codec)

If i use PowerDVD it just quits the programm. If i use WinMediaPlayer it says "corrupt file" (keeps playing video but without sound and if i close the error warning it stops).

The file doesnt end at 01:07:40, i can go on watching the files at about 01:08:00


ashy  2005-02-16 16:36:10 ( ID:k9h6gdv/wof )   [ Delete / Reply with quotation ]

So your capturing to MPEG and THEN converting to AVI?

Why not just capture to AVI? Does your card not have the ability, seems a bit daft converting to AVI.

I can capture to full resolution on my PC using MPEG4 at 25fps without dropping frames and I only have a crappy WinTV card.

I certainly don't understand the point of capturing to such a low quality format such as standard VCD format and then converting to AVI.
The quality loss will be drastic.
If you must capture to MPEG first then capture to MPEG2 with a pretty high bitrate. Your AVI's will then be of much higher quality.


However I still don't understand your problem.
Are your MPEGs stopping at 01:07:40 or your AVI's?


mki  2005-02-16 17:47:54 ( ID:u1gjpk3cjuw )   [ Delete / Reply with quotation ]

I can only record in mpeg2 or pva and i use mpeg2.

the thing is i am new in videoencoding and the only way for me
to get the videos to avi was

record as mpeg2. (works fine)
encode to mpeg1. (works fine)
encode to avi (the 01:07:40 problem)

I cant encode mpeg2 directly to avi (sound+video wont match)

I already tried FLASK. It works to encode and doesnt stop at the position
but when i open the file it runs for a half second then freezes for a half second, and so on the whole file trough.


ashy  2005-02-16 23:09:47 ( ID:k9h6gdv/wof )   [ Delete / Reply with quotation ]

>I cant encode mpeg2 directly to avi (sound+video wont match)
This is a problem with your card dropping frames. Your PC isn't powerful enough to handle the bitrates and resolution you are using.
MPEG1 VCD format is less demanding.

Is it possible to adjust the MPEG1 settings for your card? If you can, raise the bitrate, double it if you can as it will improve the quality no end.

It's obvious TMPG doesn't like the MPEGs your card creates.
What sort of card is it, manufacturer and model?

To be honest you are using the wrong application for encoding to AVI anyway. Virtualdubmod is faster and better at it.


mki  2005-02-17 14:12:12 ( ID:f9xn2diebs. )   [ Delete / Reply with quotation ]

Im using a Technisat Skystar 2 PCI on a AMD 64 3000+ with 1GB Ram.

I havnt tried virtualdubmod yet, but i have it on my HDD.
I will give it a try.

Thank you for all the answers btw. :)


mki  2005-02-20 23:09:26 ( ID:4.wrbmnpelm )   [ Delete / Reply with quotation ]

wow, VirtualDub works perfect. encodes the files without a single error
+I could save my old videos by cutting some frames at 01:07:40.

thanks for your help ashy



Request - TE25 - Trying to make a VCD to play in home DVD player No.42880
craig  2005-02-15 17:21:10 ( ID:ag4g5fkogjj )   [ Delete / Reply with quotation ]

I down loaded this program because it says that it can create VCDs, but the only thing it does is convert video files to mpeg format, correct? Well I've been looking for the past week for a program that will actually let me burn a VCD that will play on my home dvd player and every program that I've downloaded which claims to be able to do this turns out to be nothing more than a file converter. I'm not saying that this program doesn't work , but , simply converting a file to mpeg and burning it to a disc does not create a VCD.I need a true VCD creating program (freeware or fully functioning shareware)if anyone can help me out I would greatly appreciate it. I already have a million and one programs that can rip dvds to mpeg format and that is where I'm stuck at, I need to actually burn a VCD not just make an mpeg file!!


ashy  2005-02-16 08:52:42 ( ID:k9h6gdv/wof )   [ Delete / Reply with quotation ]

Jaysus man you've done the main part, you've got your MPEG all it needs is burning.
If you wanns be lazy using all in ones programs will simply sacrifice quality.

What's the problem?
You've got your MPEG just bung it into nero and burn. A few minutes later you'll have your VCD.

TMPG simply creates the MPEG in the right format for VCD burning. If you've done it right then you'll have an MPEG which is VCD compatible.

Open NERO, select the VCD burning option load you MPEG in and burn. Simple as that. Now watch your VCD.


jimbus  2005-02-20 18:04:51 ( ID:mbuce3/w28r )   [ Delete / Reply with quotation ]


To give a decent reply (without the unrelated answer from ashy) that actually relates to the request.

Most CD/RW and DVD/RW devices come with software that does just that.
Burns VDC's and/or DVD's. If not then there are alot of burning programs available commercially that can help you out. (only a few of the free programs are halfway decent at best, none worth mentioning)

Try a search on the Internet for these:
Roxio , A good 2nd best program
Nero, the #1 burning program
These are the best burners, but beware of Nero. It has built-in adware inserted into your Internet Explorer or Netscape program.

There are no decent "all in one" programs, although Roxios Easy CD Creator does come close, you will sacrifice alot of time to use it and the file will come out alot bigger than expected.



ashy  2005-02-20 19:29:53 ( ID:k9h6gdv/wof )   [ Delete / Reply with quotation ]

>These are the best burners, but beware of Nero. It has built-in adware inserted into your Internet Explorer or Netscape program.

Since when?
I've been using it for years and not noticed any.

>There are no decent "all in one" programs, although Roxios Easy CD Creator does come close, you will sacrifice alot of time to use it and the file will come out alot bigger than expected.

And the quality will be rubbish.



Question - TE30 - XDVD Bitrate Issues No.53402
cgulka  2005-02-15 15:26:10 ( ID:lydwe2zfgno )   [ Delete / Reply with quotation ]

When I encode a file using the XDVD template using the bitrate suggested, I get a file that is much smaller than the projected size. When I use the DVD template it is right on. Can anyone tell me why I am not getting accurate file sizes with the XDVD template? I would love to be able to bump up the bitrate to get an even higher quality final product.



Question - TE25 - Making my mpeg2 smaller No.42877
Monkey  2005-02-15 08:23:54 ( ID:0jqiljuienm )   [ Delete / Reply with quotation ]

i tried to encode my avi file, DivX 3 Low-Motion. The original avi file was 178Mb, but when i encode it to mpeg2 it turned to 1.4Gb. My settings were ;

size : 720 x 480 pixels
aspect ration : 16:9
Frame rate : 23.976 fps (internally 29.97fps)
Rate control mode : 2-pass VBR (VBR)
Average bitrate : 2500 kits/sec
Max bitrate : 9000 kits/sec
Mini bitrate : 0 kits/sec
Max pass : 2 pass (old types)

Encode mode : 3:2 pulldown when playback
YUV formant: 4:2:0

Are there anyway that i can make the encoding smaller?? around 700Mb?? i dont mind losing the qulity... Can nice kind person tell me what settings should i but in...

*Cheers


ashy  2005-02-16 09:00:29 ( ID:k9h6gdv/wof )   [ Delete / Reply with quotation ]

Forget about the size of the AVI, it's irrelevent.
How long is it?
As far as I can see for an AVI which is of only 178MB it must be low quality. Your MPEG settings are way too high. Why 9000Kb/s. That's just too high for a low quality source.

Create a SVCD and drop your max bitrate right down, however I can't help you any further with settings until I now the stats of the AVI.


Monkey  2005-02-16 18:54:43 ( ID:e1pitlbdvng )   [ Delete / Reply with quotation ]

nah the video is only 23mins lng... i think i found out why..somehow i have 40mins of blank space... why is that???



Question - TE25 - error message No.42875
KED  2005-02-15 05:07:51 ( ID:wwluptk.arh )   [ Delete / Reply with quotation ]

HI, I get a "" Can't load "p3package.dll"" message when i click start when encoding. What's this mean? Thanx in advance.


ashy  2005-02-16 09:00:55 ( ID:k9h6gdv/wof )   [ Delete / Reply with quotation ]

Answered.



Question - TDA1 - Missing P3Package.dll No.49347
kle1  2005-02-15 03:49:35 ( ID:.t2yyuxd81h )   [ Delete / Reply with quotation ]

When trying to convert a file I get "Unable to load P3Package.dll" error message. I am a newbie can antone help as I don't know what this is referring to. It has happened on to files so far.



Question - TDA1 - How to make minor change in authored DVD? No.49345
djohn  2005-02-15 03:16:27 ( ID:cbixufgjer6 )   [ Delete / Reply with quotation ]

Ok, so I make up my DVD. Let TDA author the dvd. This can take 40 mins up to 3.5 hours depending on the source video. Burn to disk, check, then find I want to make a change.

How do I make a minor , say spelling correction, and not re-author the dvd?

Thanks,

-j


Sakuya  2005-02-27 05:30:40 ( ID:njjiivtkzsw )   [ Delete / Reply with quotation ]

I don't think that's allowed. You must get it all correct and author or you will have to do it again. When it authors, it merges everything into VOBs so you cannot edit anything on the menus. But I'm not so sure about track titles.



Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 292 / 983 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.