This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
Pegasys, Inc., home of the TMPGEnc software, is happy today to open this new BBS dedicated to TMPGEnc MPEG Editor. For Pegasys, and for the TMPGEnc users, this software is a landmark in terms of functionalities and design without leaving apart our main concern: the Quality. Our software, and TMPGEnc MPEG Editor is not an exception, are created with the goals to provide performance, stability and simplicity. We are confident TMPGEnc MPEG Editor achieves those goals and will be a satisfying tool.
This BBS is the place where you, the user, will debate with intelligence, pragmatism and in the respects of the rules, of the TMPGEnc MPEG Editor qualities, and because nothing is perfect in this world, defaults we hope the fewer possible.
I have a project that consists of four MPEG files. In TMPEG DVD Author, the size bar on the bottom tells me that the capacity of the burned DVD is 4173/4438MB
However, when I encode the DVD folder and try to burn it, I always get the message that the file exceeds the capacity of the DVD-R!
How is this possible that 500 megs are magically added? Particularly when the program tells me I'm okay? It shouldn't be doing any re-encoding, I unchecked the box to re-incode the audio on each of the video files. ANy ideas?
Yes, the DVDs all have enough capacity. Even if that was the problem, it does not explain why the TMPGEnc DVD ecoder is reporting the size of the burned DVD as 4.1 and then burning 4.5. It doesn't make sense.
Well, the ISOs and other DVD files adds more space. Try re-making your DVD by using this free Bitrate Calculator. It is bound to fit as long as you leave in a few extra minutes after inputting the movie's length.
this is a related question of a newbie:
can anybody explain the SIZE BAR? does the full length correspond to 4.7G? what is the line near 4.4G?
Why does it say 4435? Why is the color red beyond that line?
That's because the TRUE capacity of a DVD is 4.37 GByte, not 4.7 GByte. It's that old 1024 vs 1000 Problem...
And as a Tipp: Set the Min-Bitrate never at less than 1150 kbps. OK, the DVD-Standard does allowe Min-Bitrate at 0, but while Muxing, such Files will becoming larger (it's an internal muxong-thing, hard to explain, my english isn't good enough for that)
thanks,
Now that I have a file (mpg) that is 5366/4438, can I make it fit the capacity using tmpgenc by changing any parameter other then cutting pieces? or i must go back to other software?
Again - what does the vertical line in the size bar near 4.7G says? can I fill the bar to its end (inc red area?) or only the purple?
Izzy
I HAVE A SIMILAR PROBLEM I MAKE THE PROJECT JUST UNDER THE CUT OFF SAY 4373MB (4.3GIG) BUT WHEN I BURN THE DVD IT COMES IN AT 3500MB (3.5GIG). ANY IDEAS?
THANK YOU IN ADVANCE. MAL
4.7 DVD-R is actually 4200MB or 4.2GB as displayed by DVD Author on the timeline. So Max is 4.2GB. Like someone else said, this is old conversion problem like hard drive manufacturers use for defining ONE MB. 1024KB or 1000KB.
okay I was wrong. Thanks for pointing my mistake out.
I tried adding more files to DVD Author, just beyond 4438MB red line. It gave error message saying I went over the capacity. That the capacity of a 4.7GB DVD is about 4437MB.
TMPGenc red line is at 4200MB. So this gives the user a little room (237MB), to author the DVD and add menus.
So if you don't plan on adding menus, you should be able to set the estimated file size in TMPGenc to about 4438MB. But after encoding, the movie may be a little more in size, so I would choose a smaller size so it don't go over. Maybe 4350MB maximum?
the problem i'm having is that the capacity line at the bottom starts out with 530MB when i don't even have a file loaded. so i'm being cheated out of 530MB worth of space to use. anyone have any idea why this would occur?
How can i add music as the sound for the menu screen(s)?
And does anyone know how to make good back ground images which can line up with the button layout options, is there measurements for this?
As for the background image, it's really not that easy. There should be an option where you can move the thumbnails around and make it smaller. It's not possible to remove the thumbnails at all.
I have some MKVs where it uses AAC audio instead of AC3. If I convert those to DVD, would TDA support AAC? If not, what should I do in order to keep Dolby Digital?
There's no support for AAC because AAC isn't Part of the DVD-Standard. Search for a good Tool to split the Audio-Parts in Channel-WAVs and encode them as AC3 by using BeSweet.
when converting avi file to svcd with tmpgenc xpress 3.0 I get an error message when the encoding is at 50%
Error "any_file.avi" is not a supported file format
I'm getting the exact same problem, Have you been able to find a solution? I have tried every combination of Codecs, and Filters I can think of and somtimes it works, sometimes it doesn't. Thanks, Steve
I wonder if theres anyone in here that know anything about the TEMPGenc DVD authoring 1.6 software. I just downloaded a trial version but it seems quite limited though it seems to be stucked with already finished templates of backgrounds and buttons. Anyone out there that know more than me?
The TMPG Menu is not limited by any means. In fact it is one of the easiest menu creators I have used and the possiblities are there for a very good menu if you desire it.
You can create motion menus and motion thumbnails, you can add your own buttons and backgrounds. You can change the size, colour and position of any of the buttons, thumbnails or headings quite easily by just dragging them where you want them.
I have created some wicked looking motion menus with this software and in a much quicker time than some other software.
It's simple only you need do is first select 'New theme'. Then select a layout to start with then start from there. If you wish to change anything simply click on that particular item. For instance lets say you prefer to use your own buttons.
Click the existing button then find the image you wish to replace it with. The same goes for backgrounds and thumbnails, simply click the one you want to change.
If you want to move or resize anything then just click the 'Edit menu theme button'. When done just 'OK' it.
when i have 2 similar file names. ie. xxxxxxx1 and xxxxxxx2 if i am trying to only work on the first it always automatically joins the 2. is ther a way to prevent this, or do i always have to check the source range?
I purchased the TMPGEnc 2.5 download version about a month ago and my computer crashed recently and I lost everything. How do I go about redownloading it? I can't contact support because it requires a serial number which I don't have anymore! I also never registered because I had just gotten it but I can't create an account without the serial number! Help!
Of course you can still contact support.
If you did indeed legitimately purchase a serial code then just tell them your case and your reasons for not having a serial code.
I'm sure they will still have your email address on file that they sent the original serial to.
If they find that your case is satifactory I'm sure they will oblige by resending the code to the same email address.
Yeah, I left this going last night, and when I checked on it this morning, there was an error box that just said "error 580 848". I clicked ok, like 4 times and then it said "error 277 848" and numerous other #'s. I chcecked the progress of my movie........ it was at 96% and now isn't doing anything. Just sittng there.
I'm running Windows XP Pro on a Gateway Mediacenter with 69 GB available.
Anyone have any ideas?????
I have a 3 hour avi file encoded with divx5. I set everything up in 2.5 and it was encoding fine until almost the end where it gave me a message, "invalid scanline" or something similar and stopped the encoding. Would've been nice to have a 'skip frame' option. But no, it made the whole thing useless.
The avi plays fine in players.
So i grabbed 3.0 because you can cut out parts of the movie. I was just going to test if it could encode the bad part and if it couldn't, i'd cut out half a second or so. So when i add the avi to 3.0 and play it in the cutting mode, it won't show a picture, only the 1st frame. When it encodes it just encodes the one frame which stays on screen forever but with sound.
I used DivFix and DivxRepair an neither reported any errors with the file.
I've downloaded and installed the divx codec off the official website just in case something was wrong. Same problem still. So i downloaded a movie trailer off the site. It plays fine but it has no sound. LOL. Opposite problem.
I've also noticed, the trailer is 1:15 but in tmp 3.0 in the 'clip info it reports it as 1813 frames but in the 'cut-edit' when i play it says xxxx/3762 frames.
i'm a newbie and for some reason i don't know how to adjust the output size of the avi. it always outputs at i think 352x240. i have TMPGEnc Plus 2.521. does anyone know how to adjust the output size of the avi? i want to use the avi in premiere and after effects so that i can edit a home made dvd and add effects.
i forgot to add that i want to export my editted movie to dvd (viewable on tv) so i also don't want to lose any quality which i've experienced in lots of other ripping programs. i seem to get pixelation in black clothes and jerky movements. any help would be appreciated.
You're encoding an AVI to MP2? I don't think that's possible. Maybe you are converting an AVI to MPEG? Make sure your AVI is working. If it is, go into TMPGEnc, Options, Environmental Setting, VFAPI plug in. Right-click on DirectShow Multimedia File Reader and increase the priority so that the entire row is at the top of the list. Restart TMPGEnc and try converting.