This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
I am having trouble playing VCD's in a stand alone DVD player. Back in October, I made my first collection of VCD's (Band of Brother's - all 10) and they worked perfectly in my current stand alone DVD and even in some stand alone DVD players owned by some friends in the dorms when i went back to college. This morning, since i'm on xmas break, i decided to crack out the VCD stuff again. The only problem is that this other DVD player that my family bought won't display my VCD's. It is a Sony - almost identical to the other DVD player i first used to test my VCDs. According to vcdhelp.com, only 2 Sony DVD's don't support VCDs and this one is not one of those 2. In fact, it says right on the front of it: "Supports DVD/CD/Video CD". It won't play any of the ones i made today or the ones i made a while ago. It just says NO DISC and skips to the next disc in the 5 disc changer. I'm a bit stuck on what to do. It supports yet says no disc. Is there something i need to burn at the beginning of the cd's to tell the dvd player to play?
This is Odviously a DVD Player issue and not a Tmpgenc issue..If the VCD"s you made a While ago Played on your other player then the VCD"s are fine and the DVD Player has issues..My First DVD Player would Play DVD"s But not play any of the VCD"s I put in it and it said it supported them So I returned it and exchanged it for the exact same model But this one worked Just fine so Maybe the VCD Function on the DVD Player is Busted....
Don't be fooled by that clap trap on the front of Sony players. Most Sony players do not play homemade VCD's. Yes some will play VCD's as stated, but this means the pre-recorded variety only.
Most Sony players such as the Sony Davs3000 and similar will not play VCD from a CDR, but you may be lucky as these players will accept CDRW VCD's.
CDRW are nearer to the the reflected light wavelength of DVD's than CDR therefore as long as your player can read the disk it should play your VCD.
I have used TMPGEnc for a while now and everything was working fine. Recently when I try to encode, about 12 minutes into the encoding my computer resets. If my computer doesnt reset, the screen says "Out of source range", on what looks like a dos screen. I have no idea what it might be... if anyone can help please email: ecw666@cs.com . Thanks
Nice to see you again.
I hope you are not bored about the theme. :-)
I extracted a clip from a movie DVD and run demux and mux with TMPGenc Mpeg Tools. Clip was of 500Mb, 10 min and result was some 200.000 s buffer undeflows
I copied whole 1048Kb vob (where the clip was) from unencrypted movie DVD to HD. Handled it with Tmpgencas like the clip and there weren't any buffer underflows (=0). Next I Hexedited the 1 Gb vob to the same clip and checked it with binary file compare, it was exact copy of the smaller clip vob.
Now I checked the vob again with TMPGenc - and it had the same exact number of buffer underflows. I checked the headers with vobedit and played files with software DVD player, everything normal.
The question is what is the meaning of TMPGenc buffer state report?
Does it makes any sense at all?
As long as the correct VBV buffer size has been chosen in the first place, buffer underflow errors are usually just caused by incorrect muxing rate.
The muxing rate TMPG chooses for VBR files isn't always correct and a few hundred underflows is unlikely to do any harm anyway.
The muxing rate should be altered according to the bitrate and BBMPEG has a better muxer than TMPG which will allow the muxing rate to be changed.
With MPEG2 files setting the muxing rate to '0' will force BBMPEG to scan the MPEG for the correct muxing rate. This doesn't work with MPEG1 files though, but the correct muxing rate for MPEG1 can be maually set.
This way you should never get underflow or overflow errors.
Thanks for a replay.
I haven't found correct bbMPEG with mentioned capabilities to multiplex m2v and audio (mp2 or ac3). The one I have tried is downloadable under the name BBMPEG but instead it's executive file is anmed avi2mpeg and while it may accept some streams as input there isn't any options to control muxing rate. Included in the downloaded zipd is also a bbmpeg.dll, which appearently works with avi2mpeg only or only as a plugin for something else.
Obviously it's not the one you mentioned. I have tried to search something else with the same name unsuccessfully. Can you give any hints where to download the one with capabilities you mentioned?
tia jetty
Happy Christmas!
Likely it's still the same application and these options are all under start encoding command... But the problem is that none of these streams wouldn't load.
Nor m2v alone nor vob. Application just hangs. I tried with some othere vobs and these opened normally. While all are from commercial DVD titles, where I'd like to extract a clip! What is "wrong" with some vobs or m2v's which aren't even encrypted?
If you are using Win XP then you may need the patch.
To multiplex click: Start encoding>Settings
Load your files in.
You will find the muxing option under the 'Program stream settings' tab
When i convert a avi to VCD , the image has a hitch after every second and i don't know how to solve this problem.
When you are watching the VCD the image isn't fluent all the time
What exactly do you Mean By "Frame Skip:??? What it sounds like to Me is that you have encoded the file to a Different Frame rate than the AVI file..The Mpeg file has to have the Same frame rate as the AVI file or you will get Jumpy Playback.....
I hava a avi-video with 704x384 pixels and want to convert it to mpeg2 to make a SVCD. When I convert the avi to mpg2 the video is to small and to high. I tested several modes: center, center (aspect ratio), center (custom) - but I haven't found the correct mode for SVCD. When I use the center (aspect ratio), I will get a correct ratio but on the left and right side "some film is missing". What is the correct setting, to get the complete film with borders at the top and bottom?
Don't forget to tell us, if it is PAL or NTSC.
I think, it's a wrong resized PAL 1.85:1-Video, but it can also be a wrong resized NTSC-Video. So it's impossible to tell you, what to do.
But it's always a good Idea, to use FitCD and AVISynth for a correct, fast and High-Quality resizing.
Some of the sides will allways be cut off ,or there will be exsesive borders on the top and botom, Use the "Clip Frame" settings in the "Advanced settings" to Adjust the Frame so it looks the way you want it to....
OK, I have installed FitCD and aviSynth. I have made the script with FitCD - it looks as follows:
# -= AviSynth script by FitCD v1.1.2 =-
#LoadPlugin("D:PathOfAnyPlugin.dll")
AviSource("S:+DIVX+ estmovie estmovie.avi")
BicubicResize(448,352,0,0.6,10,0,668,320)
AddBorders(16,112,16,112)
#Trim(0,120550).FadeOut(150)
But what must I do now?
Sorry - the avi is in PAL-Format
Thank you for your answer first. When I try to "load" (open video source) the script - i get an error: file "s:+divx+... estmovie.avi.avs" can not open, or unsupported.
Where must I "load" in TMPGEnc???
I have got a test-avi-video with 704x384 Pixels and one with 688x262 Pixels. Is there a general way to convert to mpeg2 for svcd in TMPGEnc without much more tools?
If AVISynth is installed correctly, TMPGEnc should open the Script without Problems. Have you tried to open the Video and the Script in MadiaPlayer?
If MadiaPlayer is able to play the Video, TMPGEnc can read it. Maybe you need a additional Codec.
You can convert AVI to MPEG2 without further Tools, but on DivX-AVIs or ASF/WMV-Fiels you may have Problems with the Sound, therefor it's a good Idea to use an other Tool for Converting the Audio-Part first.
All these extra steps are unecessary. Any strange aspect ratios can be corrected with just TMPG, no other tools are needed.
Firstly your 704x384 AVI is simply a 16:9 PAL anamorphic movie.
Choosing the '16:9 625 line (PAL)' as the source aspect ratio setting under the Video tab and 'Full screen(keep aspect ratio)' as the 'Video arrange method' under the Advanced tab should give you the correct picture size and ratio ( you shouldn't lose any of the original picture).
Also you are creating a SVCD with a frame size of 480x576, so remember the aspect ratio will not be correct when played with media player, it will be squashed vertically and look longer horizontally.
Don't worry your DVD player or your PC DVD player software will correct the aspect ratio to give you a correct sized movie.
Hello - and thank you for your tip! I will try to convert my movie with your named settings:
Input: 16:9 625 Line (PAL)
Output: ClipFrame - ArrangeSetting - Full Screen (Keep AspectRatio)
I will burn a test-CD and look at home on my DVD-Player what happens...
Hello!
I have encoded the film last night with those settings. Today I watched the mpg-file on my Laptop with PowerDVD - and it looks fine! Now I will split the file into tree segments and burn the first CD. When I go home for lunch at 11.30 am, I take the CD with me and look at home, what my DVD-Player and my TV do with that SVCD...
I let you know how it ends...
Hello again - and many many thanks - it works!!!
The film comes correctly on the TV over the DVD-Player!!!
Now I can delete all other Programms like VirtualDub, AviSynth, FitCD and so on...
ok i used this beatiful program to encode a movie from divx to a mpeg1 ,, but as i encoded it i probably miss'd an option that i can use to flip the image so it isn't upside down when i play it on my dvd player, is there any option that would allow me to rotate the movie ????
So your Problem is that the AVI file Plays upside right But after encodeing to Mpeg the image is Upside down??? Or is it Upside right in Mpeg format But upside down on your DVD Player???Well you can try Frame serveing it to With Virtual Dub and see if it is displayed Upside right ,and you can use it to rotate it also Like B_Racer Said...
If your AVI Movies are playing upsidedown in media player then this is related to a codec problem unless this movie was ccreated upside down.
This problem has been posted before and if I remember rightly was solved by installing the correct codec.
Your AVI is probably using the wrong codec to decode the movie causing this problem. Check the FourCC code of the AVI and download the correct relevant codec.
If your saying TMPG is causing the flip then this is an unusual problem.
In this case I would try re-installing TMPG and raising the priority of the 'Dirtectshow reader' in the VFAPI plugins.
Does the image look upside down in the preview when encoding and does it play upside down in media player?
Well, I have been capturing dvd quality mpeg2 files with MyDVD , ,through an Adaptec avc2200. For several days everything went fine with TMPGEN, I had my own template set up for very high quality SVCDs. Today, I went to encode a file as usual, but I get the error message about "file cannot open or is unsupported." I have never seen that before. I did not change any settings. And the Mpeg files are fine, they play in powerdvd and in ulead videostudio6. The files are fine.
Any ideas what could be causing the sudden problem, after working fine for so long?
I read many threads with similar problems and tried the suggestions but I think it is something more sinister, like a conflict with another program possibly.
Thanks to anyone out there who can shed some light.
Well All you can do is Try Raiseing the Priority of the "Cyberlink Mpeg2 Decoder" But if that doesn"t work they That Is probably better Cuz the best way to encode Mpeg2 file with Tmpgenc is to use DVD2AVI to make a D2V file and encode that with Tmpgenc..Tmpgenc doesn"t seem to decode Mpeg files as Fast or as good as DVD2AVI..I used to Have the same USB Setup that you have and Quickly came to the conclution that I could get Better Quality useing a $30 BT878a Capture card and capture to a Low compression high Resolution AVI format Like HuffyUV or Pic-Video Mjpeg then Encode the AVI files to Mpeg2, Because captureing to Mpeg2 Is a Lossy Format and HuffyUV isn"t you get Much better results captureing to AVI But you do need a Very Large Hard drive to Capture to high Quality AVI, I use a ATA/133 120GB drive and it is barelt large enough to hold a Whole movie in Low compression AVI..But as Far as Mpeg2 Capture devices go it is one of the better consumer products for Mpeg2 capture even Considering that it is a USB device that has a Much Lower data through Put than PCI...
Well you can use something else to encode the audio like "Headac3he" or you can use a External Audio encoder Plugin for Tmpgenc Like "Toolame" or "SCMPX"..They can be found on any Search engine...
During the Encoding Process, An error window pops up every 2 seconds - pausing the encoding. Error 9616 9616. I push Ok and it continues encoding. It still works but I don't want to sit and keep pushing Ok Ok Ok Ok for like the 6 hours it takes to encode the thing on the highest quality. What does the Error 9616 9616 mean and how can I fix the issue?
If you Only get this problem with Certain Files then the Problem is with the Files and Not tmpgenc..The Files could be Corrupted and Tmpgenc Has Problems encodeing Corrupted files..Downloaded Movies Have this Problem Quite often...