I have the commercial plus version and have installed the version 2.59

I found that the Wizard has a problem.

When you select your file to encode and leave the "System (video and audio)" selected as soon as you start the encode the Stream type kicks to ES (video and audio)

This does not happen if you cancel the wizard and simply select the appropriate profile to load e.g. PAL DVD.

On that note what are best settings for highest quality for PAL DVD encoding? i.e. CQ or VBR and what bit rate settings amongst other choices available?

Thanks

Useing the CQ method is the best for time and Quality if you have a Good source file...Multi-Pass might be better if you don"t have a Clean source file..

I captured DTV(MPEG TS) with DTV capture board.

This DTV capture board captures DTV Stream(.tp).

TMPGEnc does not read MPEG2 TS(Transport Stream) file.

How can TMPGEnc read this TS file ?

What kind of VFAPI can be used to read TS file.

You CANT encode "Transport Streams" with Tmpgenc you need to use something like "PV Strumento" or even "Mpeg2VCR" can turn transport streams to System streams...then you can use tmpgenc...

I am just curious. I have dual processor P3 1Ghz, running a dual processor os... and running version 2.58.44... and I've set the settings in the "Option", "Environmental Settings", "CPU" for multithreading (2 CPUS)... But it appears that my other cpu is idleing... did i do something wrong... if i can get the second processor enabled.. would it be faster?

Just curious.. any help appreciated.. :D

Well that is the purpose of haveing a Dual CPU and Multi-Threading...so the odvius answer is Yes!!

I can report the same problem - I tested V 2.53, I've set the settings in the "Option", "Environmental Settings", "CPU" for multithreading (2 CPUS) - and both CPUs together are running with 50%....

I think, this is a bug and when Jack does report the same problem in V 2.58 I suppose, this issue does already exist in the actual version.

I would want to BUY the newest V 2.59 / 2.60-version - if this version would use both CPUs to 100%.....

Regards,
Reinhard

Abit VP6, 2 x P-III/1000, W2K

Never trust the Task Manager of Windows, it lies.

Hi,

I have spent a while looking through all these messages and found none that will solve my problem.

The problem is, when i am trying to convert my AVI file to MPEG2 the converted files' sound goes out of sync at a certain point in the movie. I have tried extracting sound from AVI into WAV using VirtualDub. I just dont know what to do now. The original AVIs sound is perfect all the way through.

Thank for any help

Humet

This can be very difficult to fix, and it isn"t a Problem with Tmpgenc But with the avi file..I get from your Post that the audio is in sync at the beginning but it gradually goes out of sync as the movie goes on..This can be caused By the fact that some Poorly Made AVI files aren"t the exact frame rate that they say they are..The file might say that it is say for example 23.97fps but the file would be actually 23.95fps so when the video gets encoded to the correct frame rate of 29.97fps the Length of the video becomes just slightly shorter than it was before and shorter than the audio therefor causeing the De-Sync..The reason that it is so difficult to fix is that the movie Can be the correct frame rate for most of the movie But at a certain point it changes so you never know were in the movie the problem starts...but if it is a Constant think through the whole movie you might be able to fix it by useing a Audio editing program like "Cool Edit" or Sound forge" to stretch or shrink the audio to the exact same length of the video, but as I said this can be very tricky...

Hi,

I have looked at the .WAV file size and the AVI file size and they are the same size. Plus, the sound doesn't gradually go out of sync it just goes out of sync at 1 moment in the film and then it is out of sync for the rest of the film.

thanks for any further help

What you can try to do to fix this is to Cut the Mpeg file exactly were it glitches and goes out of sync, then take the part of the file that is out of sync the whole way through and use "Mpeg2VCR" to Mux the audio and video together and Use the "A/V sync" Feature which will let you off set the audio to match the video, then when you got it right then Join the 2 files together...and hopefully this will work...

Is there any easier way of fixing my problem ???

Is there?

When loading TMPGENC I get the message "At adress 028BDB4A, Reading error ocure against adress 028BDB4A2 and then the program stops. Howe do I sole this, I can not use the programe.

BR
Morten

I have the same problem with most movies I am encoding, I cannot figure out how to fix the problem, I have been restarting the encode where it had stop (when the error occurred), works ok, but always a couple seconds of delay between the two or sometimes three movie segments, even when I set the delay between clips at "0" when buring with Nero. This error has become a real pain in the butt, and it isn't making the joy of encoding movies any fun, its actually a big headache. If anyone has any answers please please email me or ICQ me

I have Noticed that Most of the time this error will only pop up with Movies Downloaded off the net...When movies get downloaded off the net they usually get a Bit corrupted through the downloading proscess which Causes errors in the File which Tmpgenc will Choke on ....There is No Magic solution accept for not useing Files downloaded off the net...I downloaded about 16 little Mpeg and avi clips off Kazaa the other day and out of the 16 files only 9 were able to be encoded without any trouble, most of the others had errors while encodeing, I was in most cases able to Solve the problem by Frame serveing the file with Virtual Dub, but I still had 3 files that Just couldn"t be encoded even though they played without a problem....

Sorry to add this, but I have better luck with movies off the net, the problems I am experiencing are when I am encoding from an actual DVD, not from movies downloaded.

Then the process you are using to encode DVD's must be wrong because you should not be experiencing errors from such a clean source unlike dirty and corrupt downloaded AVI's.

ASHY

I have done about 50 movies, and about 20 of them I have expereienced this problem, the others no problem at all, but lately happening a little more often. This is about the only problem I ever have encoding the movies. This problem seems so common, that I cannot believe that others don't experience it from time to time. The Process I follow are from the guides from vcdhelp.com, and I have followed it step by step. Only once I have tried to encode an .avi to vcd, I had better luck with it, except the playback was a bit jerky.

Hello. I am a big fan of this product, so when the demo version expired on my machine, I came to this site and purchased the product. I received a serial number in my email box. However, I can find NO PLACE to enter the serial number and re-activate the software. Every time I open the splash page and click where the email directed me, I end up at the Web site. I have paid the full price for the software and would like to be able to use it. Any suggestions?

OK...after much searching, I figured it out...you CAN'T register the Freeware Version...you have to download the PLUS version. Uninstall any old version you have on your machine, and then reinstall the Plus version...which will then prompt you for a serial number. Anyway, if anyone is having the same problem that I was, do the above and it should work for you.

Hi
I have created a few SVCDs from captured video (high bit rate), encoded to SVCD and used VCDEasy to author the CD to enable chapters.
This has all worked well and I have some excellent digital backups of my VHS movies and home videos.
Now the problem started when I wanted to alter one of these so I tried to bust out the MPEG from the SVCD. I have previously used ISOBuster with good results but these SVCDs wont play on my PC and are difficult to view in 'My Computer'.
The original MPEGs (before authorising) worked fine in media player.
I have a Plextor CDRW so I thought that shouldn't be the problem.
Has anyone any ideas of how I can get these MPEGs out of the SVCDs.
Thanks

Flash

This is simple "Don"t Use anything like ISO buster or anything like that Just go into the Files that are on the SVCD disk and go into the "MpegAV" folder and Just drag & Drop the .MPG file to your Desktop..and that is it ,That file is the Mpeg file that you burned to Disk and it is in the correct Mpeg format..

Thanks I will give that a go.
Just curious though... what do these iso buster programs do then?

Flash

i have a message already on here but my other problem is when i try to encode and theni get a message that says tmpgenc will shut down error occured in MP43DMOD.DLL, does anyone know what that means and how i could fix it??? i would appreciate it alot. nicole

I'm (a newbie) using DVD2AVI with TMPG. I'm outputting the audio track as AC3 (whatever that is), and TMPG seems to recognize it fine, but the final MPG has no audio.

I've tried various other audio output settings from DVD2AVI. Decoding to WAV results in a playable WAV track, but it is not recognized in TMPG.

Am I missing something?

Tmpgenc in Most Cases will Not Decode AC3 audio, that is why you need to extract the audio as a WAV file from DVD2AVI and use that as the audio format..Tmpgenc encodes WAV files better than any other format..You should have the "Dolby surround Downmix" setting on in DVD2AVI when extracting the WAV file...

Thanks. I suspected as much, but I keep getting an "unsupported format" error when I try to encode the WAV file that DVD2AVI creates.

Any ideas?

>Tmpgenc in Most Cases will Not Decode AC3 audio, that is why you need to extract the audio as a WAV file from DVD2AVI and use that as the audio format..Tmpgenc encodes WAV files better than any other format..You should have the "Dolby surround Downmix" setting on in DVD2AVI when extracting the WAV file...

Can anybody please help!
When I convert avis to mpegs I often find that the picture keeps going purple,it then returns to normal colour. This cycle continues through the whole film at 5-10 second intervals.
Many thanks in advance.
Rob

This is caused from 1 of 2 things..You either have the "Angel potion" codec installed on your system..This codec is a Very buggy "Hacked" Codec which is Known to cause this problem, if you have the codec Get rid of it...Or you just need to raise the priority of the "Direct show" file reader.....

Is there a way to protect files from conversion? This one set of movies is really giving me trouble. TMPGENC tries to convert the file into a 72 minute video, when it is only 24 minutes long. Someone suggested using a bitrate calculator, but i dont know what to do with the results.

After further inspection, i realized that the audio bitrate is set to 127...while the successful conversions had bitrates of 128? can tmpgenc encode avi files of bitrate 127?

It doesn"t matter what the bitrate of the AVI files are accept that Tmpgenc will not encode audio streams that have "VBR MP3"try setting the beginning and end points with the "Source Range" in the advanced settings...

I'm converting an avi to vcd at the same time using Virtual Dub to frameserve subs to the movie, but after 2 minutes Tmpgenc closes down with no warning or error messages. Anyone has experienced anything like this and has a possible solution. It closes down at same spot in the movie, but there is no error when i watch the avi.