baby bug

TMPGEnc Plus-2.54.37.135

wizard mode click on svcd-film in the info its 29. fps should say 23.fps
like it used to be.

I downloaded the TMPGEnc Version 2.54a(1011KB)
file but it only contains 242K and cannot open also.

Download it again,and turn off any download managers.....

Id like to remove all the commercials without having to output 1 chunk at a time, like I can in virtualdub

I don"t know what you are talking about the "new" cut feature,the cut feature is the same as in the last version and there is nothing new about it,the only way to edit out comercials is to do it in pieces,or do it before hand with virtua dub and then encode.....

The 'New' cut feature is new to 2.54 and wasn't in any of the other versions.
To use the feature as you say go to Setting>Advanced and double click the 'source range' filter.
Using the slider and the the 'start' and 'end' controls select the part of the movie you wish to cut and then click the 'Cut editing' button and choose 'Cut currently selected area'.
Repeat the above steps for each part you wish to cut out then click 'OK' and your movie will have the selected cuts removed from the movie.
You can check the result before you encode by using the 'Preview' feature, go to File>Preview.

ASHY

Yeah that New cut edit feature rocks!! I can cut scenes from DVD in d2v files before I encode that way I can reduce the file size by just killing credits or blank spots in the movie. TMPGenc just keeps getting better good job Hori. ~NewtronX

That is a new "source range "feature, there is nothing new with the "merge & cut"..........

Who mentioned Merge&cut?
The question was the New cut edit feature which is a new feature located with the source range filter and is indeed used for cutting and editing.

It even even states it as a new cut and edit feature in the version history on the download page.

ASHY

I thinking cut as in merge and cut when i was answering the Q,just an oversight....

I have a mpg file from the ReplayTV I want to burn to SVCD.

I use DVI2AVI to create a compatible audio and video file.
I select the bitrate that will fit on a 80min CD 1.5xxxMbps.

Everytime I click start I get a generic windows error.

tmpg has created problems and the application will close.

Dont know why any help.

I don"t know what it is but it sounds serious,does it work with other files? or have you used the program before and didn"t have problems?if it just started happening and it used to work try useing a different file or why don"t you just load the mpeg file in "tmpgenc"? if it is a mpeg2 file and you can"t load it in you have to then de-multiplex it and then load the files in...but if you geep getting this error try un-installing all the programs you installed since the program worked last,of un-installing "tmpgenc" and reinstalling.....I don"t know what to say .....good luck

...seems they may play in WinMed6 but 6 won't run on 2000....what to do, what to do.

er...that sould be "SMR formated avi files not 'playing' in winMedia player 7 or 8...." sorry, flopy fingers

Use another player. WinDVD works. Maybe even a DIVX player may work. BS player does.

ASHY

Bythe way Media player 6.4 used to run fine on my Win 2000 system.

ASHY

I have a divx film that has a framerate of 23.976 fps. I want to encode it using tmpegenc to a standard SVCD... but I do not want to do a framerate conversion... How would I encode it with the svcd ntscfim template? do I use the 3:2 pull down method? or do I have to convert the movie framerate? I am getting alot of mixed answers regarding this issue.. any insight would be appreciated

I"m pretty sure that you just load in your file and load the ntsc film template and encode,I think you use the 3:2 pulldown if you want to encode a 29.97fps to a 23.97fps,But don"t quote me on this.........

I read in a reply by ASHY that SVCD is not compatible with ntscfilm framerate...but vcd is...but I don't want to lose the quality on it.... but that 3:2 or inverse telecine will tell the dvdplaer to play it with an internal telecine o the fly to 29.97 ... wondering how I accomplish this...or will burning it with ntscfim template just be fine? This is a strange issue.. almost ready to just use vcd...but don't want to lose quality

Well if you think that doing vcd will solve your problems then do vcd,but I have encoded to 23.97 without problems,but if you want to do vcd with out looseing quality then make a xvcd,do a vcd with the bitrate up really high,I do these quite often and my dvd player playe them perfectly and "nero" won"t give you any errors,at 1650kbs you can get 60min on a cd,and about 40 min at 2500kbs..

You seem to have got the wrong end of the stick.
I'll just clarify what I meant.

SVCD needs to be at a frame rate of 29.97 not 23.976 to be compatible with your player therefore you will need to add a 3:2 pulldown to your DiVX file, which is 23.976, when you encode.

To put it simply 3:2 Pulldown tells the player to add an extra 6 frames per second to the 23.976 to make the movie 29.97 fps.
This is all you have to do to make the movie run at the correct framerate.

To do this just load the SVCD(NTSC Film) template and the movie will have the 3:2 pulldown added.
Pulldown only works for MPEG2 and only on sources which are originally 23.976 fps and won't work for MPEG1 or VCD.

Seeing as you mentioned it,Inverse telecine does the opposite. It removes the 3:2 Pulldown to return the movie back to it's original 23.976 frame rate.

Hope this makes it clearer.

ASHY

Ok sounds good...the only question now is do I have to manually check 3:2 pull down? or will it just do this automatically...my original framerate is 23.976... Thank you so much for your help on this issue.

one more thing...when I look at the video tab under settings... it says the encode mode is 3:2 pulldown and at the top it says the framerate is 23.976 (29.97 internally)...does this mean it will automatically encode into this? or does this mean I don't have to check 3:2 pulldown? or do I just do it no matter what if it 23,976 and I want to encode to svcd? I am confused...but that is apparent... lol...thanx again

If your source is 23.976 and you want to encode to SVCD then simply choose the SVCD(NTSC FILM) template and the 3:2 pulldown will be automatically added and the frame rate will be changed to 23.976 (29.97 internally) which means you will end up with a movie which play in your DVD player at 29.97 fps.

All you need to worry about is setting the correct source aspect ratio for your movie.

ASHY

ok that is all I needed to know...on a side note ...when would I manually check the 3:2 pulldown in the advanced options?

To be honest I'm not quite sure what the functionality of this setting is.
It doesn't produce a true 3:2 pulldown it simply converts a 23.976 fps or 24 fps movie to a 29.97 fps or 30 fps de-interlaced movie which doesn't look very nice.

You would never really need to use this and can't think of a situation when you would.

ASHY

Correction, I should have said a non-interlaced movie.
De-interlacing and non-interlace are 2 different things.

ASHY

I am exporting a .avi from Premier using "Matrox MPEG-2 I-Frame V2" compressor. When I convet using TMPGEnc v2.54 it runs along but the video is black and no audio. And sure enough,upon playback the video and sound is both missing. I want to create NTSC Video CD's. What am I doing wrong? What settings can I change to test?
Thanks

It will work well of you export you files in uncompressed avi format,I don"t know anything about the matrox mpeg compressor but i know that uncompressed avi"s exported from Premier work well.......

I am trying to encode a avi to svcd. The source is bright and I would like to sharpen or deepen the color as well. I tried playing with both color corrections in tmpgenc, it seemed to look fine on the preview but after encoding a bit I checked and there was too much purple. Should i be using tmpgenc to do this or maybe virtual dub...but I am new to the virtual dub program.

Another question..I encoded a movie that was 56 min and was able to use CQ max 3100 and min 1800, when I encoded the other half which was 60 min I had to use max 2000 and min 1400 to make it fit...I am wondering why I had to go down so much for the extra 4 min. I would like to know what a good bitrate program to use is ...I have downloaded some but I find they are not accurate at all...any suggestions?
I am using 80 min 700 mb CD-R.

thanks
Jules

"tmpgenc" isn"t the program to use to enhance your images,once you get a good source file then "tmpgenc" will do a good job encodeing it to look like the avi you put in but it isn"t for makeing them look better than the source..useing "cq" and "vbr" It is mostly the minimum bitrate that needs to be adjusted most of the movie will be encoded at a bitrate closer to the minimum bitrate, the max bitrate is saved for the complex scenes and ones with high motion,I usualy put the minimum bitrate a couple hundred kbs lower than the average i want, and put the max bitrate really high, so for the complex scenes there is enough bitrate there to do make the movement look smooth.....

You seem to have a lot of problems with this purple buisness Jules.
What are these movies? Angelpotion?

Anyway I don't see what's wrong in using TMPG's filters as most of them are pretty good.
What you need to do Jules is enable the 'Overlay' in TMPG as most players use your graphics card overlay to render the image.

To do this double click the 'custom colour correction' under the advanced tab and then tick the box which says 'overlay'
This will show you the image as it would appear when played in your player.
Now click the 'Add' button and this will add the 'RGB Brightness' control. We don't want this so click the box labeled 'Type' and choose 'Basic setting' from the drop down menu.

Now use these controls to change your movie (ensure the overlay remains checked while doing this).

To correct the purple problem use the RED and BLUE controls to return the picture to a normal colour.
When you encode the result should be the same on your player as you set it in TMPG.

ASHY

Regarding your question about bitrate calculators.
I have used many bitrate calculators and some of them are either clunky and cumbersome to use or are downright inaccurate.

I have however found one which is easy to use and is absolutely spot on with it's calculations.
I have done quite a few tests with this software and it has always correctly calculated the final size of the movie and is the most accurate one I have found.

Download here: http://www.tomzavodny.cz/program/bitcalc/VideoCalc.zip

ASHY

The .avi movie plays fine in all my windows programs. After I use TMPGenc
to convert it to MPG the audio is absent.... Any Ideas??? HELP!!!

ALL RECENT CODECS ARE LOADED!

Thanks in advance...

There are quite a few reasons that this can happen,but they mostly come down to the audio in your avi file isn"t compatable with "tmpgenc",The audio could be "vbr" which tmpgenc doesn"t handle ,or a unsupported format like "ac3".You can extract the audio from your avi file to wav with "virtua dub" and encode that to mp2 then multiplex it with the video from your mpeg file after de-multiplexing it..but if the audio is "ac3" you need to convert the audio with an "ac3 decoder".....

how do I tell what format it is encoded in??

Thanks

all I do is this.... open virtual dub and load the movie file....go to the audio tab and choose compression...choose no compression...PCM....then in the conversion tab I do not convert it...leave it alone ...then set it to full processing mode...then go to file and choose save wav...also go to file...file information...this will give you the framerate and the resolution....this is good to know which template to load...after your done saving the wav file...in tmpgenc load up the template that corresponds to the framerate found in virtualdub...then for the video and audio...use the avi file for the video source and use the newly created wav file as the audio source....there a re a few benifits by doing this...#1 the audio and video will be in sync(as long as the encode framerate chosen was the same as the source framerate)...#2 Will stop alot of unecessary errors that can come up from using avi for video and audio file...#3the file should encode a few hours faster... If I use the avi for video and audio it takes about 4 hours....if I extract and save the wav and use that for the audio source it drops down to about 1 1/2 hours... Happy encoding

It isn't necessary to do the selecting no compression, full processing blah...blah...blah..bit as it doesn't have any affect on the outcome anyway when you choose the 'save wav' option.

Just simply choose 'save wav' and the wav will be extracted as a wav no matter what the settings are.

ASHY

actually ASHY this is not true.... If you leave it on direct stream processing it will save a wav...but in avi format leaving you with a file about 100-300meg...I have had terrible sync problems with these audio files... If you choose a mpeg or layer compression the wav will be saved with compression...which could possibly cause a loss in quality...the resulting wav files that have the best sound quality and always create perfectly synced movies are around 800-1000meg.... I find this is the only way to get it to work... on a side note...I sometimes have problems saving the wav file with virtual dub...the whole program crashes.... I found that magix music video maker generation 6 works awesome for saving the wav files... it is alot slower than virtual dub...due to loading the movie...but it resamples the file for excellent sound reproduction and can also be increased or decreased in volume for those that like to mess with this...along with a multitude of filters...but even a direct save will create a very good sound...

I apologise you are absolutely right!
For some reason I was sure that it would only save as a wav and not with compression.
Has it always been like this with Virtualdub because I could have sworn blind that I had tried it once and it didn't work (but that was a long time ago when I was a complete amatuer)

Well you learn something new everday.
Thanks 4 the info.
Heres a tip for you.
TMPG is quite capable of extracting the audio from an AVI or MPEG file.
Simply load the file and click File>Output to file and choose wave file. You can also add compression if you wish.

ASHY

well ASHY I am not exactly sure....as long as I have been using virtual dub I have noticed this issue... I found the solution to my problem at www.vcdhelp.com that site is really nice....it has many tutorials...the problem is is that not one tutorial is 100% accurate, nor does each one explain all of the options.... I have found the best possible settings from reading totorial after tutorial and coming up with my own way of diong things... I reccomend reading every tutorial on that site and all the different ways of doing things... if your a halfway intelligent person...you will come to the same conclusion as I did...

Trying to convert AVI to Mpeg for a videao CD. Each try the picture freezes at the same frame and will go no further. I even tried waiting a while but it did not resume. Any suggestions?

Does it happen with all files or just this one file?It"s probably just this file so the problem has to do with the file as opposed to tmpgenc,you should try to run it through "virtua dub" and scan for errors,and see if there are corrupted frames, but this won"t solve your problem,one thing you can try is to encode up to were it stops and then start encodeing agein at the frame or a few frames after after the error occors(virtua dub should tell you were the bad frames are but if not just encode after the error)and then you can join the parts together with the "merge & cut" feature.....

i put a mpeg-1 movie on a cd and played it on my dvd player and when i watch it there is a delay with the sound and picture when the person is talking the sound comes after there lips move.

is there a simple way of fixing this prob?

Go to the "search" and type in "sync" and you will get a bunch of reasons why movies go out of sync and way to correct the problem.......

hi,

I used DVDx 1.8a and TMPGenc to real time encode DVD to MPG. It was working fine for a while. Today I upgrade TMPGenc from 253 to 254, run TMPGencVFP_install.bat. Then after i start DVDx encode, and run TMPGenc, it give me error messages when I try to select the avs source file:

IPO source: There's nothing to serve, Are audio/video server taken?

I even restart the machine and reinstall TMPGenc, still doesn't work.

what exactly does it mean? How do I fix it?
thanks.

I even remove version 2.54 and reinstall 2.53, still the same problem. It used to work just fine.

never mind. i got it. I uncheck the "directshow multimedia file read" from environmental setting, then it works. no idea what it means though.

thanks anyway.