Pegasys Products BBS

Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.


Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 971 / 982 ]   Next > >>
Classify Product Title User name Reply Last update
Question TE25 purple flashes garfar 1 2002-03-29 07:49:25
Question TE25 Quicktime mov files over 2gb cannot get into TMPG Noah Kadner 0 2002-03-28 20:25:58
Question TE25 i still can't get it to work walidcederbond 1 2002-03-29 19:46:45
Question TE25 i can't get the software to work walidcederbond 1 2002-03-28 17:56:53
Question TE25 Want ot READ a Review? eagle 0 2002-03-28 17:00:11
Question TE25 Stream reading error Shaft 1 2002-03-28 18:44:24
Question TE25 Anyone now some good mpeg-editprograms? hekne 2 2002-03-28 18:25:15
Bug report TE25 Program Crash WHile Batch Encoding Daari 4 2002-03-29 03:01:49
Question TE25 Wont load .mov Why? leadbiscuit 1 2002-03-28 16:33:08
Request TE25 Compression Steve 4 2002-03-29 20:22:34
Question TE25 Will the Serial # work for future versions? Bruce 4 2002-03-28 18:00:30
Question TE25 OGM File Format. ssmith 1 2002-03-28 18:42:32

Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 971 / 982 ]   Next > >>
Question - TE25 - purple flashes No.17463
garfar  2002-03-29 01:09:17 ( ID:6spp2x9jrvm )   [ Delete / Reply with quotation ]

are trying to encode avi movie file into vcd (ntsc) but im getting purple flashes(pixelization) they only last couple seconds then disappear to repeat every 5-10 secs any help would be great


techno  Home )  2002-03-29 07:49:25 ( ID:82zqdopxre6 )   [ Delete / Reply with quotation ]

lower the directshow filter in the environment settings.

Techno



Question - TE25 - Quicktime mov files over 2gb cannot get into TMPG No.17462
Noah Kadner  2002-03-28 20:25:58 ( ID:ird3okhrtjm )   [ Delete / Reply with quotation ]

I've got Quicktime DV files I can't get to encode- they are usually 9 to 15gb. When I use the Quicktime VFAPI plugin I can load these files but then the image quality is very bad-almost as if TMPG is encoding the proxy version of the file and not seeing the DV codec.

If I don't use the Quicktime loader- the files will either not open in TMPG or they will open and encode but the encoding stops at the 2gb point of the source file. I realize this is a file system limitation.

Is there any way to qet around this without breaking the Quicktime into 2gb chunks or recompressing into AVI? Perhaps a program that breaks it up and sends to TMPG automatically?

thanks,
Noah



Question - TE25 - i still can't get it to work No.17460
walidcederbond  2002-03-28 19:12:56 ( ID:byfgb8hg5fn )   [ Delete / Reply with quotation ]

i went to that link you gave me earlier and checked my dvd, it said that my dvd supports vcd and cd-R, so what's the problem. am i doing something wrong with converting from mpeg to vcd? by the way what is the converted file's extention, is it still mpeg or something else? because when i'm done converting, the new file is still mpeg but smaller size, is that how it's supposed to be?


Ashy  2002-03-29 19:46:45 ( ID:n3gjkhi6dvc )   [ Delete / Reply with quotation ]

Are you actually burning the mpeg file as a Video cd or are just burning 'as is' to a cdr.
You need to use software such as NERO to burn the MPEG file as a valid Video cd using the Video cd option or you player won't recognize the file.



Question - TE25 - i can't get the software to work No.17458
walidcederbond  2002-03-28 17:07:22 ( ID:byfgb8hg5fn )   [ Delete / Reply with quotation ]

what do i do? it seems like it's converting fine but i try to play the new burned cd, nothing comes up on the screen. is the problem with my dvd player or with your software? i have a denon dvd-1000 .please help out here.


erzug  2002-03-28 17:56:53 ( ID:stzs9.rriyg )   [ Delete / Reply with quotation ]

Check out this link for your player.
http://www.vcdhelp.com/dvdplayers.php?DVDname=&DVDselect=Denon&Submit=Search&Search=Search



Question - TE25 - Want ot READ a Review? No.17457
eagle  2002-03-28 17:00:11 ( ID:8yfrh0k0y/a )   [ Delete / Reply with quotation ]

Hi,

If you have a few moments vist http://www.softdeko.8m.com/review.htm . Here you'll find a few software reviews - with more to follow.

Checkout http://www.softdeko.8m.com/video_encoder2.htm - there are a few programs that might be of interest to TmpgEnc users :-)

---------------------------------------------------------------------------

SoftDeko TRY before you BUY software info data http://www.softdeko.8m.com/latestupdates.htm Remember to bookmark (use Ctrl+D) this site for future reference - add it to your "Favorites".






Question - TE25 - Stream reading error No.17455
Shaft  2002-03-28 15:40:11 ( ID:5mtqcsz6m5w )   [ Delete / Reply with quotation ]

Hi @ all,

I got a problem with encoding VBR with TMPEG.
flask MPEG and avisnth are used as frameserver, and everytime at 99% progress TMPEG prompts an error Message"Stream Reading Error".

Did anyone know a sulution on this problem?


Techno  Home )  2002-03-28 18:44:24 ( ID:82zqdopxre6 )   [ Delete / Reply with quotation ]

have u tried different Avi's?

Have you tried w/o frameserver?

Techno



Question - TE25 - Anyone now some good mpeg-editprograms? No.17452
hekne  2002-03-28 15:01:52 ( ID:r2xc2vdefgc )   [ Delete / Reply with quotation ]

Looking for a good mpeg-editprogram where you can cut the mpeg-file so it fits a regular CD-R. I've tried Ifilm edit 4.1 but the trialversion didn't allowed movies greater than 5 minutes. Anyone who knows a share/freeware program that with good quality.

Thanks.


techno  Home )  2002-03-28 17:06:31 ( ID:82zqdopxre6 )   [ Delete / Reply with quotation ]

TMPGENC!!!!!!!!!!

You just select how much you would like to encode (video) and select the source range filter in the settings tab. Then hit start frame and then choose your last frame that you want to stop at, and hit stop frame.

Then you encode!

Techno


Ashy  2002-03-28 18:25:15 ( ID:n3gjkhi6dvc )   [ Delete / Reply with quotation ]

Or use the MPEG tools within TMPG.
Just goto file and click MPEG tools then click the Merge&Cut tab. Select your movie by clicking the ADD button, choose the TYPE of stream you want i.e Video cd then highlight your movie and click the EDIT tab. Then choose where you want to cut the movie by selecting the start and end points and then click ok and then run. Don't worry if you get some silly error like 'Read error occured against address 73f01d04' it's just a bug and won't affect your movie.



Bug report - TE25 - Program Crash WHile Batch Encoding No.17447
Daari  2002-03-28 14:46:56 ( ID:xcin33i9hgw )   [ Delete / Reply with quotation ]

The program seems to crash after finishing the first file of a batch encode. I will set four or five to run overnight and wake up and only one is complete. I observed the program shut itself down after completing a single encode file also. I don't think this is the normal behaviour.

Since I was unable to find any setting on any menu to control this, I assume it is a bug.

Thanks!
Daari


techno  Home )  2002-03-28 16:34:15 ( ID:82zqdopxre6 )   [ Delete / Reply with quotation ]

Well, it could be some of these reasons:

1) Plain simple bug
2) corrupted frames in video
3) low memory
4) too many background application running thus low system resources

Techno


Sluggo59  2002-03-28 22:18:15 ( ID:fq.fvsnt4ml )   [ Delete / Reply with quotation ]

I've been having the same problem with Version 2.0 and forward. Anyhelp? I'm running w2k 384mb of mem and a 500mhz P3. No crash has been noticed, just shutting down after 1 mpeg. Help?


AlanB  2002-03-28 23:14:11 ( ID:8yfrh0k0y/a )   [ Delete / Reply with quotation ]

With regards to BUG.

I have had the same problem Ver 2.53.35.130 on Windows 2000. I Have a PIII 1.3Ghz, 500mb Ram and 20gb HDD. I tried encoding a video file as Mpeg1 and after it had finished it Bombed out with a Windows Program error. It did finish the file.

Hope this info is useful

Cheers

AlanB


Daari  2002-03-29 03:01:49 ( ID:xcin33i9hgw )   [ Delete / Reply with quotation ]

To follow up a little:
1. It happens on EVERY avi file I have (and all the ones Im trying are verified to be non corrupted.
2. I have a Tbird 233FSB 1GHz processor, 512MB RAM, 20GB free HD space, WinXP and no other programs running during the batch encode.
3. It always finishes completely and correctly the first encode in the batch then quits with no WinXP errors.

Hope this helps fix it!

Daari



Question - TE25 - Wont load .mov Why? No.17445
leadbiscuit  2002-03-28 14:41:21 ( ID:5zzojdme/hk )   [ Delete / Reply with quotation ]

I just got TMPGenc and I cant get it to open, let alone convert, .mov
I would like to know why, and if there is a to fix it. Thanks.


techno  Home )  2002-03-28 16:33:08 ( ID:82zqdopxre6 )   [ Delete / Reply with quotation ]

www.vcdhelp.com

Download the quicktime plugin

This should work

Techno



Request - TE25 - Compression No.17440
Steve  2002-03-28 10:36:45 ( ID:zvcflshclp2 )   [ Delete / Reply with quotation ]

I have copied a DVD film using Clad DVD. I then used FlaskMPEG to convert to
MPEG1. I then used TMPG to compress to fit CD 650mb 74mins. Original film 75 mins long. I used the encoder no problem. When I try to burn to the CD using
NERO burn I get an error message stating that the file is too large to burn to
the CD. HELP!!! Where am I going wrong.


Ashy  2002-03-28 11:06:15 ( ID:4adzcnohuc. )   [ Delete / Reply with quotation ]

How large is the file in MB, never mind the minutes. Because your film is 75 mins long it doesn't necessarily mean it's gonna fit on 74 min cd. It all depends on the actual bitrate of the movie.
If your movie is just over 740mb then you may be able to use the overburn option in NERO. This will give you a few extra mins of recording time.
In NERO goto FILE>PREFERENCES>EXPERT FEATURES and tick ENABLE OVERBURN 'DISK AT ONCE' BURNING and put the maximum cd length to 78 mins.
Before you burn make sure you choose the Video CD option to burn your file and make sure you choose Disk at once as your write method.

If all else fails why don't you just get an 80 min cd, these are just as cheap as 74 min cd's.


Steve  2002-03-28 23:01:43 ( ID:zvcflshclp2 )   [ Delete / Reply with quotation ]

The bit rate is 448 kpbs.
Just for your infothis is the first time I have attempted this.Everything goes well until i go to burn. I can watch the whole film on windows media player.
Beleive it or not i did buy 80min CD today. Thanks for your help.


Ashy  2002-03-29 12:11:56 ( ID:4adzcnohuc. )   [ Delete / Reply with quotation ]

Firstly your VCD is not a standard bitrate and may not be compatible with your DVD player.
Secondly the bitrate you have used will make the movie look terrible.

If you wish to encode a compatible MPEG for VCD then forget the Flask MPEG crap and use TMPG and load one of the Video cd templates, make sure you use the right one for your system i.e PAL or NTSC.
This will give you a movie which you will have to split in two.

Go here for more info: http://www.vcdhelp.com/dvdtovcd.htm


Steve  2002-03-29 20:22:34 ( ID:zvcflshclp2 )   [ Delete / Reply with quotation ]

Thanks I will give it a go.



Question - TE25 - Will the Serial # work for future versions? No.17435
Bruce  2002-03-28 08:14:28 ( ID:11woevyb5zm )   [ Delete / Reply with quotation ]

If purchasing now for the current (2.53), will I be able to download future versions without having to put out any more $ for your product?


Techno  Home )  2002-03-28 08:34:45 ( ID:gye7n0apz7c )   [ Delete / Reply with quotation ]

I am not sure,you may wish to contact pegasys(?) on their website by clicking the banner at the bottem of your screen.



M.Bastian  2002-03-28 10:02:17 ( ID:vljrcsq3gdr )   [ Delete / Reply with quotation ]

http://www.pegasys-inc.com/e_license.html

According to this license agreement the License Key is valid for Version 2.5 This includes all minor updates. Version 2.6 will most likely be another purchase.

cheers

M. Bastian


RX  2002-03-28 10:16:24 ( ID:rq73n1voqvj )   [ Delete / Reply with quotation ]

As far as it is minor version upgrade such as 2.5X or possibly 2.6X, it is free to upgrade! But version 3.X will not be free although No one knows when it is available.



erzug  2002-03-28 18:00:30 ( ID:stzs9.rriyg )   [ Delete / Reply with quotation ]

Usually most software vendors allow free upgrades within a major release. I would also expect any other 2.xx releases to be free.



Question - TE25 - OGM File Format. No.17433
ssmith  2002-03-28 06:19:58 ( ID:lpuyzozt8.w )   [ Delete / Reply with quotation ]

Just got a new encoded file with the extention .ogm TMPGenc can't convert it to mpg to burn to disc, and I seem to be having trouble finding a tool to convert it to mpg. Anyone hve any pointers or suggestions?? Thanks!


Techno  Home )  2002-03-28 18:42:32 ( ID:82zqdopxre6 )   [ Delete / Reply with quotation ]

try increasing the directshow filter in the environment settings

Techno



Pegasys Products BBS [ Sorted by thread creation date ] << < Prev.   [ 971 / 982 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.