This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
I have established that TMPGEnc is supposed to be the best, so all I want to know is how does its PAL vcd template quality compare to real vcds you buy? Also I would like to know how I can increase the quality from the template without going into svcd.
Thanks
Techno what do you mean increase the buffer size to 224? To create correct Mpeg1 VCD data the buffer has to be set at 40KB. This is the buffer size the decoder uses and should be set at 40.
You won't get an increase in quality with that setting but you may get playback problems on your hardware player if use it.
To increase the quality just up the bitrate. A 2hr movie can roughly fit on two 80min cd's at a bitrate of 1600 kbits/s and if you lower the audio bitrate you can up the Video bitrate even more.
Look Techno I'm not being funny, but there is loads of documentation on buffer sizes and I suggest you go and read it. The same doesn't apply to Windows software decoders because the VBV buffer is irrelevant.
The buffer size needs to be set accordingly with gop sizes and bitrates and the particular decoder being used. At bitrates up to around 1800 kbps a buffer of 40 kbps should be enough, but above that the buffer should be increased.
So for VCD 40kbps is the optimal setting.
I doubt it has any bearing on quality as it's only used to set the buffer size of the hardware decoder so that it can display the clip correctly. If this buffer is set higher than the physical limit of the hardware decdoder the movie won't be displayed correctly if at all.
Most DVD players will be able to handle this higher buffer size, but some other hardware equipment which can only play MPEG1 such as Dreamcast or Cdi may not.
Why the hell do you think Mr Hori has set this as the standard in TMPGenc for Mpeg1 VCD. Don't you think if there was better he would have put this as the standard in TMPGenc.
It's fine tweaking things, but at least find out what it does before you do it.
I have a high quality widescreen dixv file that I would like to encode as mpeg2 to make an SVCD but the file is encoded at 640x352 @ 23.976fps and every resolution I have tried has "cut-off" the widescreen. Anybody know what resolution would be best for this situation and hopefully let me keep the widescreen, thanks in advance for any help
I keep get this error after i have run dvd2avi, and try to encode the project file in tempeng.
any ideas, I have the registered/installed the plugins as instructed (vfaip)
When I'm trying to open a .mov file (with the Project Wizard) in TMPDGEnc 2.53 I get an error which says "...can not open, or not supported". Does anyone know what's wrong?
I'm using TMPG 2.5. With earlier version I had no problems, but no I can't seem to make a working .mpg file. I only get sound and NO video.
Installing TMPG again didn't work.
Can anyone help me??
Now the next problem occurs (and I know I should look foor faq's or already answerred questions, but this way is faster):
after encoding, the movie is of bad quality (al little blocks). Is it something you can adjust in the options screen? P{lease help me, for this way I can't watch the movie!
In all the versions of Tmpgenc that ive used, when i try to use the the "Merge and Cut" tool, i have a problem...
If i click on an mpg in the list and edit the start and end points, when i come out of it, i get a "At address 73f91D04,Read error occurred against address 73f91D04".
I can continue on without problems, but whenever i go into an mpg to edit the strat and end points, i am greeted with the above message when i exit.
Any ideas?
I use Winxp PRo (but i beleive this happened on Win2000 as well).
What's wrong with my VCD making when I get only the voice but not the picture at all?
I've done everything by the manual: starting with the virtual dub, encoding with TMPGEnc and burning with VCDEasy or NERO. I don't see the picture of the movie in the virtual dub, but I don't see it in TMPGEnc either. When I start to watch the original (avi, divX) movie file with media player it works beautifully, but in the TMPGEnc (v. 2.53) I only here the voice...
I received this error when trying to merge two .m2v files.
Error Not Enough Memory
Windows Out Of Memory
Your sytem is low on memory. To insure that windows runs properly, increase the size
of your virtual memory pageing file. For more information see help.
The files sizes I was trying to merge were:
1.)movie_1.m2v = 3.45gig and
2.)movie_2.m2v =4.49gig.
My windows 2000 Virtual memory paging file size is :
384mb initial size and 4095mb maximum size.
Total paging file size for all drives:
Minimum allowed: 2mb
Recommened: 382 mb
Currently allocated: 1149
TMPG vers.2.52.34.129 core 1.83.129
Windows 2000
Intel P3 - 1ghz proccessor
256 P133 mb Ram
Gigabyte mainboard GA-6VX7B-4X (VIA chipset with 4 in 1 drivers) ATA 100
40 gig hard drive 7200 Rpm
Im not sure but I think there is a 4gb limit on file sizes within the windows platform,all windows systems work on the fat32 system which has a max file size of 4gb.....this could be your problem...........
The 4gb file limit is only imposed on Windows 9x and Me systems.
Windows NT 2000 and XP practically have unlimited file sizes within the limits of the file system of course.
It seems your problem is probably your swapfile isn't big enough to handle the job your trying to do.
There is a limit for swapfiles which is 4095mb.
The way around it is to create another swapfile on another partition of maximum size.
Windows will then use both swapfiles and effectively gives you a total swapfile size of 8190mb. This should be enough.
If you don't have another partition then I suggest you create one with partition magic or other software as this will not only make things easier but will also increase the performance of your system.
If you don't want to do either of this there is a way to create multiple swapfiles on one drive but involves some registry editing and isn't really advisable when you have the other options at hand.
Thank you all for helping me out....sorry I forgot to add and this I should had I already have a NTFS file sytem going because I ran into the 4 gig error in WIN9X so I did a duel boot system with WIn2K and did a NFTS fdisk/format....I beleive that it is my swap size and I will create another partition like sugested and specify it for swap size , but how do I do that....I nkow how to use partition magic so all I need to know is how to specify the new swap. I have another HD in the system and I think I allredy specified it as an additional swap, and if I did it the way suggested the result is still not the answer because it still does not work.
Techno,
Iam well aware of the choice NT 2000 and XP give as file systems, but the point is that the error that windows was giving to the gentleman is that there isn't enough virtual memory and no amount of changing to another file system such as NTFS will change the swapfile size barrier.
It will still be 4095mb and the only way around it is to do as I suggested. I didn't even mention about formating the hard drive, so where that came from I don't know.
To access the Virtual Memory property sheet, open System Properties from the Control Panel. Then follow these steps:
Click Advanced
Click Performance Options
Click Change
Then you should see a list of your drives. Click on each one then change the maximum size to 4095 and click set for each one.
I can only give advice and help on the information I was supplied with and to my knowledge this is the remedy to the problem for the error which windows is creating.
If it doesn't work. I'm all out of ideas.
Ok, Here is my question , NEED Help !!!. I use tmpg to encode the movie to a svcd and it encodes fine i noticed though after i burn the movie to disk and play it the picture fade to a redish , pinkish color then goes away , then about 2 min later it does so again though the whole movie ????? is there somthing im doing wrong ?? PLEASE EMAIL ME !!!!!! Thanks ,...