Hello, is there a way to delay the audio about 2 seconds. I need to make the audio and video sync and they are 2 seconds apart. I want to be able to start the video encoding and then have the audio start encoding about 2 seconds after. Any Suggestions? Thank you.

Is it your mpeg file that is out of sync or your avi file? either way just encode like normal then de-multiplex you mpeg file and get "bbmpeg" or "mpeg2vcr" and they have multiplexors that let you offset the audio or video when multiplexing to correct sync problems...

Is there a way to edit mp3 audio files(like virtual dub with avi files)?

In a way but not with "tmpgenc" I hope you aren"t useing mp3 files for audio in your vcd"s or svcd"s cuz they will not play on most dvd player cuz they are not part of the vcd or svcd standard but if you just want to know for other reasons you can use "cool edit" or "sound forge" or "goldwave" but I think you will have to decode your mp3"s into wav files then edit them then output them as mp3"s or output them as wav then encode back to mp3, It is difficult to edit compressed files be it mp3 or mpeg files unless they are uncompressed that is why you might have to convert your mp3 to wav to edit them then encode them back to mp3..you can find a few good audio editors on kaaza for download...

Ok I'm not using the mp3's on vcd's. I just wanted to know. Thankyou

to create a 2 second gap goto settings/advanced
doubleclick source range
audiogap correct

enter + or _

if you tinker with it you will sync your audio

I finally converted an avi to an mpg and I uninstalled Angel Potion Codec and the movie came out great, instead of all the purple pixels. However, now the problem exists in burning it as a VCD. I have Nero Express and it gives the option of making VCDs, which I chose to do. I have a 700MB CD and the movie is 637MB, and is about 86 min. in length, and 640x272 resolution. I chose the ".mcf" file from KVCD that lets you burn a 120 min. movie onto 1 CD at 704x480 resolution, but now I noticed that Nero won't let me burn it because the length is too long, I guess. I know this because the bar on the bottom which shows how much space is left turns red after 80 minutes and it's past that. The data side of it is less than 700MBs, but the length of the movie is 86 minutes. It was doing that when it was in avi format too, so now I'm thinking whether or not it was worth the 3 hours to encode it into an mpg because I might as well have just left it as an avi if I knew it would give me the same problem as the mpg file. I thought maybe MPEGCutter would cut the file into 2 parts so that I can burn it on 2 CDs instead--maybe even add chapters so that when I play it on my DVD player, then it would be as if it were off the real DVD, where I can hit the skip button and it would go to the next chapter. But I couldn't even figure out how to use the program. Please give me some advise on all these problems. I was having a big problem where all the movies I tried were taking 24-26 hours to encode, but all of a sudden something happened and it only takes 2-3 hours. I guess maybe uninstalling Angel Potion Codec helped. Also, if you know of a free program that lets you make chapters out of the mpg file, I would really appreciate it if you could let me know. Also, I was given advise that I should go into TMPGEnc and use the Merge function and have it rewrite the header because that may have been the problem in burning the movie. So I did this and I went back and added the file into Nero's VCD creator and the bar on the bottom went red again after 80 minutes, signaling that the file is too big for the CD. It encodes the file, but then it spits the CD out again before burning it. I tried burning it last night and it encoded the mpg file for about a couple of hours it spit the CD out saying that there was not enough space on the medium for the size of the file and I should insert a larger medium or something like that. Please help. Thanks.

How much to big is it cuz if it is less than say 10-15mb you can use the "overburn" option in Nero this will let you burn more than the disk says it holds..anyway I"m glad that you got your computer working at a good speed again ,I knew that getting rid of that codec would solve your problems cuz it is a notoriusly bad codec and can cause a whole host of problems.As for doing chapters I know there are lots of authoring programs that let you do chapters like "dvdit" and "ulead dvd workshop", the encoder I use for mpeg2 lets me do the chapters in the settings before I encode and the encoded mpeg file has the chapters allready in it, but maybe this will be a feature in tmpgenc in the future (i hope).......anyway take care

Hi guys I was just wondering if anyone knows how to fix this problem,I downloaded the new 2.55 trial version and as soon as I open the program I get the evil "The 30 day Mpeg2 trial Has Expired" thirty days , hell it hasn"t been 30 seconds yet, so I tried to edit my registry to get rid of any mention of tmpgenc and I thought I got every thing but I still get the error.Does anyone know how to fix this problem, it"s kinda hard to help out on the BBS if I can"t Keep up with the new versions, I know I might be able to fix it if I set back the date on my computer but I don"t want to go to that much of an extreme if I don"t have to........Thanx Guys......

Buy TMPGEnc Plus.

I"ve got tmpgenc pluss so don"t get smart, I was asking a simple question..

If you "fix" that, I think you infringes MPEG-2 patent licnese or license agreement of TMPGEnc. I do not think it is good idea to mention about registry etc. at all. Plus, if you have TMPGEnc Plus, you do not need TMPGEnc.

Trust me If they didn"t like what I said they would have deleted the post, I don"t want to install the 2.55 version over the 2.54 version until I know that I will like it better than the 2,54 , like the 2.53 129 was better than the 2.53 130 so I didn"t install it, so I want to see if the 2.55 is better than the 2.54...I does not infringe on copyrights if I havent used the 30 day trial..so an answer would to my problem would be good not your misinformed criticism...

This would probably be my last post on this topic.

"TMPGEnc Plus" does not have installer, and people can try different version on same PC, Now I am using 2.54a and 2.55 in one PC, and I do not see any problems because of those 2 different versions.

I am not making an issue of what Minion is asking, but HOW Minion is asking...

OK now, let's wait and see how this topic goes. sherlock!

You still haven"t solved my problem,It still exists, I guess you didn"t understand my question,the one time I ask a question and all I get is problems,and by the way I"m not irish so don"t call me shamrock...

Hi All,
I want to know why I get a black preview screen when I try to convert
from AVI(Divx) or sometimes from MPEG to a VCD ,& the converted movie
is only an Audio file with a black screen!?!!? Could you please help me to solve the problem ?
My O/S is winXP > could it be the problem ?
waiting for your replies :)

Best Regards

Is the audio the audio of your film or video?

Yes it is the audio file of the movie ,but the screen is black !!

First make sure you have all the proper codecs installed on your machine, and make sure that your "direct show "vfapi plugin is at a priority of "2", hopefully this will get the file to be encoded....

thanks for your reply,But how can I make vfapi plugin at a priority of "2" ?
could u please explain it to me :)

Best Regards

Go to "options"then to "enviromental settings" then to "vfapi plugins" and then right click on your plugin to change the priority......

thanks buddy :) Working great :)

Every time I try to convert .avi file to .mpg file I get the error message Can't load P3Package.dlll Please let me know what is wrong or if I should have a specific codec. Thanks in advance.

Go into you "tmpgenc" filder and copy and paste the "p3p package .dll" file into your "system and system32" folders, this will solve your problem.....

I ripped a dvd with smart ripper and used dvd2avi then used tmpg to encode it as mpeg1 for a vcd. Frame rate was set at 23.976 fps and frame type was interlaced. Forced film was also on. I used the template (videocd ntscfilm.mcf) to encode. I used Nero to burn the video cd. The cd plays fine in my computer, 700 mghz running windows ME. Using Power Dvd to view the vcd. But when I put in my home Dvd player which is an Apex Ad-660 I get glitches in the first 5 minutes of the movie then it's fine for a while and then the movie looks like it's fast fowarding and then audio is out of synch then it starts playing fine again with audio back in synch.Could it be the nero software? My dvd is supposed to play mp3, cd-r and cd-rw ? anyone else have this problem?

This is a common problem with "tmpgenc" encodes, and have noticed that if you encode with your vbv buffer at a lower setting like 60, and you burn your disks at a lower speed like as slow as you can burn this might solve your problem .It has worked in the past with my system....

After converting a AVI file into MPEG2 (SVCD) the sound is metalic.
High tones are shrill.

What can I do to prefent this.

sound AVI file = wav 44.1 kHz

What program did you use to convert the wav.
The sounds you are talking about usually come from converting the sample rate using TMPG, but as you already have a 44.1khz wav it must be the software you used to create the wav.
If it was Virtualdub you used to create the wav then next time make sure you check the high quality box before you convert to a wav and this should solve your prob.

ASHY

The Capture file AVI has 44.1Khz wav sound.
Then I convert it into mpeg2 with TMPGenc

rate control mode is CBR 2520 kbits.sec
motion search =motion estimate search fast
encode mode interlace

Are you saying that the original AVi doesn't have this problem. If so I would use one of the external encoders you can use with TMPG such as Toolame.

ASHY

rate control mode is CBR 2520 kbits.sec
motion search =motion estimate search fast
encode mode interlace

Yes avi file is ok, where can I find such a tool like Toolame or how must I use it?

I recommend using ssrc...

What is ; ssrc

SSRC is a very high quality program for converting between different smaple frequencies, so it might help you of your audio sounds metalic... I use it through a program called Besweet that convers AC3 audio to regular stereo wave.

There should be a stand alone version somehwre but haven't found it yet...

when I create MGP file with Studio DV sound is also ok, but then video isn't good.
Downloaded Toolame Ashy placed it in environmental setting but no difference (until know)

Use BeSweet 1.3 to do the WAV->MP2 conversion.
You can get the program and it's Interface here: http://www.doom9.org/software.htm#audio

ABS

But the sound isn't as a second file..it is included with the captured AVI file.
Somewhere in the conversion with TMPGenc there goes something wrong.

MPG2 (svcd) file created with studio 7 sound is ok to.

So it must be a setting into tmpgenc.

Hmmm....

Well, except sliptting it to two files and then multiplexing them again after compressing I have no idea, sorry :-(

ABS

That is what I have done now, but what a wast of time (o:

The TMPGeng encoded MPG2 sound seems normal but when you listen good is is like someone is talking into a (tinned)can (If you know what I mean, I am dutch)

Try encodeing the audio with a different audio encoder and just encode the video with tmpgenc, I use "db power amp" with the mp2 codec to encode audio for mpeg files then multiplex them together...

Hi,

I was just encoding a m2v clip (from original 5Mbps to 15Mbps, so I can combine with another clip that is 15Mbps), and noticed something odd. When I encode the picture becomes brighter! If the original clip for example has avrage brightness of 39, the reencoded clip's brightness is 58! If I reencode again it gets as high as 76! I tried using the "Output as YUV" option so the resolt was 45, but then the brighter areas where brightned so there were complete areas of pure white...

Thought of using basic color correction, but then I would loose parts of the image that are dark! Anyone has any solution? I haven't noticed it before, maybe it's a bug? Anyone saw this effect on other programs?
(Note: When I use TMPGE to output as the m2v as AVI, there is no additional brightning.)

Yes, I know I have high demands ;-)
ABS

Try setting the "Output YUY data as Basic YCbCr not CCIR601"to the other
state.

Tried changing this setting but there is still brightness problem created. I can upload captures from the encoded files to my site and direct you there so you can so if you are interestead...

BTW, it seems like a TMPGenc bug because I tried encoding useing LSX encoder and although overall quality wasn't as good as in TMPG, there wasn't any extra brightness...

ABS

I'd copy quicktime reader in tmpg folder and I tried to convert a .mov file in a mpg file, but I could not hear anything after the process. Please help me..

Extract the audio from your "mov" file and encode it to wav and use that as your audio source ....

I just wondered how big 700mb avi/divx will become when i code it to mpg.(vcd)?
i ask this becouse my harddrive is so full stuff so i have to burn something out there but how mutch?

look at the length of the divx

remember that a 74 min audio cdr will be about a 74 min vcd

unbelievable

someone correct me if you like

It depends on the length of the movie not the size of the source AVI.
A regular movie is usually over a Gigabyte. Standard VCD takes up 10mb/min, so a 100 min movie would be around a Gig.

ASHY

i posted a page or two back about the mpeg 2 video capture i do using powervcr
and encode to vcd using tmpgenc and the audio loses sync
during encoding

i installed a fresh copy of xp over my old copy and re-installed powervcr and tried to encode my old file with tmpgenc and the audio and video synced perfectly


i think some programs i had installed messed everything up
never use ulead mediastudio 6.5
it screws up tmpgenc somehow and tmpgenc wont run unless you un-install mediastudio
i bet half the programs i try screw my programs i use alot
thats why i dont install realplayer or quicktime
anyway

i think if people are having problems with tmpgenc crashing or messed-up
take alook at the other video programs installed and un-install them

it worked for me when i had ulead installed and tmpgenc would just crash and im happy i found the culprit (dont believe me?... download the trial and tmpgenc will crash before you get to encode)

i will post an update if i discover the program messing with my mpegs and causing sync probs in tmpenc

i knew my captured mpeg2 videos were fine

before the xp re-install
tmpgenc would encode my mpeg2 videos with audio video sync problems
after xp re-install
those same mpeg2 videos now encode to vcd format using tmpgenc with dead-on sync


thanks for listening to me type

*big update*

ok

i found the program that causes my audio sync problems with tmpgenc

for the developers
this is my senario

i use powervcr to capture 6 hours of music videos at a time in "mpeg 2 excellant quality" setting
i used regedit to set the max recmpeg size to 4gig from 600mb
i get a couple hours of great video quality for each 4 gig
i also set the audio quality to 320kb

a 4 gig mpeg2 video is to large to edit using most editors

i found m2-edit pro to be the best mpeg2 editor for my system because i can easily find the videos i like and trim the videos to a file without altering them and it is realtime and wont crash
i just select the edit points and click trim and save as a mpeg file
this copies just the video i want without recompressing etc.. takes 30 secs

now i want my videos to be vcd and tmpgenc offers the best quality and compression i can find
my vcd's look as good as mpeg2 in my opinion

anyway
here's the problem
when i encode the cut video to mpeg1 vcd the audio and video is out of sync

and m2-edit pro is the culprit
because when i uninstalled that program
i can then encode those cut videos to vcd using tmpgenc without any audio video sync problems

im happy that i solved the problem because i can now continue to capture videos that will work fine

i hope this info may be usefull to your team and may help create a more compatible application
regardless thanks for making a great video application

I have m2-edit pro and ulead media studio 6 and 6.5, and ulead cool 3D, and dvd movie factory, and all my encodes seem fine it must be a reaction with these apps and Win XP, I run "ME".....One thing I did notice with m2-edit pro is that when I put in say a 800mb file for editing or multiplexing I end up with a 2.5gb file so I have to run it through the "merge and cut" to get all the padding taken off and it is slower than tmpgenc....

i have xp pro

i use m2-edit pro only to trim the file
it just cuts the video i want and doesnt alter the file with compression
it takes 30 sec to cut a file

make sure you select output same as source

it should work fine

btw...
m2-edit pro is horrible at compressing files

if i use that program to compress to vcd i see horrible blocks

oh well

What is FitCD? I heard about this thing and it interested me because I have a big problem getting my mpg files to one CD. I have Nero Express and my file size is 636MB and I have a 700MB CD, but the length of the movie is 89 minutes. This FitCD seemed to give a calculation of the file size, I believe so that you can fit in onto one CD. Is this true?

If your file size is 636mb and you have a 700mb disk, what's the problem?

ASHY

Please see "Burning Problem", also written by me.