Hi
I am using your program to convert avis to mpeg1 and everything works very well,I just have one problem. When the resulting mpeg is burned into a vcd,If there is a long pan shot then the video seams to give little skips about every 5 secs. This isnt a big problem but I would like to know if ther is a way to fix it.
SYSTEM: pIII 600 512mb ram winxp pro
Thanx for any help u can give

Rix500,

This could be to do with your settings in TMPGEnc.
Can you check what frame rate the original AVI is and then let us know what settings you used to encode?

>Rix500,
>
>This could be to do with your settings in TMPGEnc.
>Can you check what frame rate the original AVI is and then let us know what settings you used to encode?
>
>Thanx for the reply
I am using the pal vcd template, full screen (keep aspect ratio)in clip frame,and normal on the motion precision, thats about it as I dont realy know what all the other settings do.
Most of the avi files seem to be 23 fps
Thanx again for the help

I'm no real expert so maybe someone else can offer more help, but ...
I would first off suggest you raise the motion search precision to high quality rather than normal.
And secondly (and perhaps more importantly) go through the project wizard and make sure that if your AVI is 23.976fps that you chose the NTSC film template. (Use VirtualDub 'file info' to find out the FPS).

This will output your film at the same FPS as it went in.

Most DVD players will be happy to play VCD's in a variety of formats. You don't need to output in PAL format.

Try it on a short piece of of AVI to see if it helps rather than encoding a full 90mins.

The problem is because you are changing the framerate of the original AVI. TMPG can NOT do this correctly.
Most DVD players will convert a 23.976 fps movie to 25 fps, but I'm afraid the result will be just the same as you are experiencing now. Jerky playback as most don't do real framerate conversion.

You need to convert the AVI's to the correct framerate prior to encoding or use AVIsynth to do the correct framerate conversion.

ASHY

I have extracted the .DAT mpg1 files from 24 video cds and I want to compress them smaller for playback on an IPAQ. The first 8 worked perfectly, however when I try to open 9 thru 24 I get the error "can not open or unsupported". I tried changing the VFAPI plug-in priorities, as I saw in other posts, but it has no effect. Any ideas?

Thanks

Try de-muxing the File and just encodeing the Video ...if it loads just mux the audio to the encoded video...Re-encodeing the audio will cause problems sometimes anyway....

Why and what did you use to extract the MPEG. VCDgear by any chance?
TMPG is capable of opening the .dat files directly without extracting first.

If you wish to extract the MPEG from the .dat file itself. Just load the .dat file into both fields in the the simple multiplexer and click run.

ASHY

Everytime I try to encode an AVI to mpeg I get horrible purple bleeding that happens on every video I've tried. I wonder if anyone has heard of this before and knows what to do to resolve it?

It sounds like a "Angel Potion Codec" Problem...If you have the Angel potion Codec installed get rid of it ...It causes this discoloration ...but if you don"t have that codec then try raiseing the "direct Show" file reader in the "Vfapi Plugins"...

yup that was it, thanks a million

hey I need to know where do I find if I got Angel Potion codec install on my computer because I get purple when I try to convert a movie it fades in and out during the movie please help? but I have been read the message board and I think this is it. thanks


>It sounds like a "Angel Potion Codec" Problem...If you have the Angel potion Codec installed get rid of it ...It causes this discoloration ...but if you don"t have that codec then try raiseing the "direct Show" file reader in the "Vfapi Plugins"...

I'm using windows xp along with a pentium 4 2.0 ghz with enough memory and shit, but when i try 2 use "merge and cut" for splitting a svcd (made by tmpgenc) in 3 parts TMPGenc shuts down and i get the well-known message that an error has occured and microsoft wants 2 know about it.

Am i doing something wrong, is windows xp fucking it up or should i buy a new machine?

NO..What you need is a different Mpeg editor...Tmpgenc"s mpeg editor isn"t very good...Well it is good when it works But that isn"t as often as It should....

Try completely deleting TMPG first then re-install it.
If that doesn't work try an earlier version such as v2.56 and below.

ASHY

I remember reading somewhere that VBR two pass does not work with Ulead Media Studio yet.

Is it working now?

If not, does the Pro version of TMPGEnc works?

Cheers
--
Nicholas Yue

Why would we Know ????The Mpeg encoder in Media studio isn"t very good ...you can do 2 pass with any version of Tmpgenc...

how do i install this? it doesnt say how in the website? im going to use it with premiere.

You can"t use it with premier....The only way to use it with premier is to use the "Premier Video server" from "http://www.videotools.net/...and frame serve it to tmpgenc or any other encoder...and it is Very slow...You are better off getting a real Mpeg plugin for premier...

When I try loading my d2v file that was made using DVD2AVI, it freezes for about 10 seconds, then gives the error: "Tmpgenc has caused an error in KERNEL32.DLL. Tmpgenc will now close." Then, it gives this error: "File C:... can not open or unsupported." I've had the d2v files work from other movies, but with this one I'm having troubles. I've got the DVD2AVI.vfp in the environmental settings and everything. Any suggestions?

Make a New D2V file with DVD2AVI....

How do I cut a large mpeg file (718 mb) into smaller chapters?

Well I guess the odvious way would be to use a Mpeg editor.you can try the "Mpeg Tools" Merge & Cut" ...Go to "File" to "Mpeg tools" to "merge & Cut" and you can figure it out from there.it"s easy as Pie...And a 718MB Mpeg file isn"t a Big Mpeg file...You can fit it and More on a 700mb 80 minute CD-r....

He can use a 74 Minutes CD-R.

74 Minutes = 737 MB
80 Minutes = 797 MB

And Chapters without cutting into parts can be done with VCDEasy.

I just wanna say that yes people, I am pretty much a beginner.I've been encoding for about 5-6 months and I'm STILL learning more from experience and experimenting with different projects.You people teach me alot of what I need to know. I wanna thank everyone on here for all your advice, support and help for everything!!

when I'm encoding a movie and when it's done, I get no sound...I have before, but since I've cleaned my hard drive things have changed alot, and this is one of the issues I'm experiencing now. I'm sorry people for all the questions and problems but I like encoding movies myself and learning how to at the same time from you guys teaching me! please help me with this issue and I'll try to stay off here for awhile...and maybe I can give someone else some advice when I learn enough from you all. (LOL)...thanks!!!

Well the audio in the source file is probably not supported By tmpgenc, or you don"t have the proper Decoders installed on your machine..What you need to do is Extract the audio from the Avi file to a WAV file with Virtual Dub then use that as the audio source in Tmpgenc...

Does TMPGEnc limit the source file size to 4 Gigs? If so, how do you get around this limitation?

No Tmpgenc does not limit the File size But your Opperateing system Might...

I am running Windows2000 with NTFS which does not limit the file size. Any other ideas as to what it might be?

Nope I have no idea...I run XP and use encode mpeg file bigger than 4 gb quite often...You can try encodeing it in 2 parts and joining the 2 files after....

about 4% into encoding i get this error index of scan line is out of range 360