I was wondering if anyone else was experiencing this. When I try to encode (anything) using the Divx profile on my Vista64 machine, XPress 4.0 crashes every time. Sometimes it will render for a few frames and then crash, but mostly it happens when it first starts to encode. The weird part is is if I use the AVI profile and then encode using the Divx codec there, everything works fine. So it doesn't seem to have anything to do with the codec itself, but with the way XPress 4.0 is setting up the DIVX encoding profiles (I'm guessing). I don't have this problem on my Vista32 or XP machines.

Thanks,
George

Confirmed. It happens to me as well. I've been encoding in WMV format, but yeah Divx would be preferable.

I'm on an i7 920, 6 Gigs of RAM, Vista 64 bit.

May I know is it possible to add or burn 2 subtitles to an AVI file? Reason is I want to see the English subtitle and my wife wants to see the Chinese one instead. So the best solution is to display both at once and maybe resize the font smaller.

Actually many years back, we often see multiple subtitles in VCD. But in DVD, we can only display one at a time.

Technically, I think that is possible, but I think you'd have to input them manually to have them both show up at once.
You can try importing one and then adding the second manually.

I have been using TMPGEnc Authoring Works 4 for a while and have never had any problems with it. but all of a sudden, when I try to render a disc, it just says: "Status: Prepearing to rendering of Top menu page #1" and nothing happens. This happens in the Batch authorer and when I try to render them one at a time in the program. I tried disabling track linking and that didn't help. Any ideas?

It turns out that the problem was that the task priority was set to idle so it was just taking forever to do anything. After changing the priority to normal, the rendering returned to its normal speed.

if your running a quad core system and a good amount of memmory, i would select real time on the process s this will kick it into high high and wont damage the system

Can someone please help me with the audio filter section of this software program?
All I want to do is reduce the volume in a few clips of my home movie because they are too loud.
I select 'audio filters' within the editing screen, then select the volume tab and check the 'enable volume adjustment'. I select 'volume change' in the volume adjustment method and set the volume change to say 20% and click 'ok' at which point I return to the editing screen. But when I play the clip the volume is the same as before?
Other than the audio filter, I find this software far more user friendly than
Ulead, Pinnacle or encore.

Thanks in anticipation
Abidan

you would need to view the edited part in the preview tab just above the others

Thanks Mathew,
There are quite a lot of variables within the audio filter options, is it as simple as using the volume slider within the preview menu and clicking ok? or do the volume changes rely on user settings within the Audio gap tab/Noise & tone reduction tab/volume adjustment tab? I have searched through the help menu and tutorial but can't find any detail regarding audio adjustment.

Thanks in advance

ok the cvolume slider has nothign to do with the adjustment within the video you wish to produce, thats merely the same as your pc volume.

the volume filter is the adjuster not the gap tab.

you then increase the volume by %

i tend to increase by say 200

but limit is 500%, then you press ok, or indeed go to preview tab above and listen to it and then press ok

I want to convert 1080i AVCHD to Mpeg2 1280x720 for projection using 720p projectors. (I am using Watchout software to do multi-projector shows) But I am getting pixelation when subjects move fast, even when reviewing the converted videos on my computer screen. For my output, I chose a constant bit rate and a video bit rate of 18,300 kb/s.

Keeping in mind that my videos are going to be projected from my computers and NOT condensed down onto a DVD, could someone make setting suggestions for getting the best video possible when converting AVCHD to mpeg2? And of course, I am especially interested in eliminating the pixelization on fast moving subjects while maintaining the highest quality.

Thanks!

Use a 2-pass variable bitrate for the best image quality. If space is not a restriction, you can set the maximum and average bitrates pretty high to ensure the best quality. Keep in mind that if the source footage is already pixelated in fast-moving scenes, you probably won't be able to make it look any better.

I am trying to remove the black bars on a mts file and convert it to mp4 for apple tv. I am able to remove the bars but when I do the end result gives me a movie where the actors look a little funny. The movie looks like its been stretched tall. Can someone please help me with this and let me know if this is even possible to fix. I have to change the movie size to 1280x720 for apple tv.

Make sure the aspect ratio is 16:9 in for your output format. You may also need to set the aspect ratio to 16:9 in the clip properties tab of the editing window.

Is there any way to author BDAV blu-ray disc with TMPGEnc Authoring Works 4?

I have a Sharp BD-HP20 Blu-Ray player which only supports BDAV, and not BDMV.

It should be fairly easy to implement BDAV authoring as it is just a stripped down version of BDMV without menus.

At the moment, I am forced to use other programs to accomplish BDAV authoring (on BD-RE) but I hope that this feature can be added to TMPGEnc in the future, maybe as a plug-in or a minor upgrade.

If you can play commercially produced Bluray Movies, you are playing BDMV structured movies.

The Sharp firmware doesn't allow BDMV on burned BD-RE or BD-R. This was also the case for many other blu-ray players a couple of years back (including Sony, etc), but support for BDMV on recordable media was added with later firmware versions.

However, Sharp hasn't gone down this route, hence BDAV remains the only format supported for BD-RE/BD-R.

I just installed the 4.0.2.14 version and The program keeps locking up on me at various different stages of the authoring process. The few times i have made it to the output stage, it wont ouput anything and just gets stuck at 0%. Everytime it does this my CPU usage jumps to about 38-53% and it locks up everything!! Im running a quad core with winxp sp2, and 4 gigs of ram so I shouldnt have an issue with any of this. Anyone else havin this issue??

Not sure what it could be. You may want to contact support in the meantime:

https://secure.pegasys-inc.com/support/support.php?lang=en&product_sname=taw4

I've had a look at the menu system and figured out how to make a custom menu, but I was wondering if there is a way to add the menu to an existing DVD without having to output at the end and creating a whole new DVD. I'm talking about going into the code of the ifo/bup files and just changing certain things to make it in line with what you've previously done... or am I way off here an you have to re-encode/output everything for it to work? Bit of a novice... but avid to learn it all. :)
Thanks for any help.

dvdremake pro

I have a number of avi files which contain two different language audio tracks. I know this for a fact as I am able to choose between the two when I play the file in Media Player Classic.

How can I choose the language I want to have when I burn the file using TMPGEnc Authoring Works 4?

When you import your AVI files into Works, if Works recognizes multiple audio tracks, you should be able to select which audio to include for that project with a checkmark. This is what I see when I import a standard DVD with multiple audio tracks. I put checkmarks along the audio and subtitle track I want to use for that project.

Perhaps you could direct me to where Works 4 indicates that it recognizes multi language tracks allowing me to choose which track I want?

The fact that Media Player Classic is able to play either a Spanish OR an English track suggests to me that both tracks do exist.

Thanks,

Alan

With the extensive support provided for all kinds of files in KARMA, I was a little suprised (I admit - dissapointed) that MKV was not among them.

Is there any reason for omitting MKV, or is there a workaround / update soon?

All in all, a superb product here!

Hi, I'm Italian and I'm evaluating the trial version of your software which I think is really fine. I'm trying to convert high definition Video in FullHD or HD WMV. The encoding with my Vista 32 bit system (Intel i7 920 CPU, 3Gb DDR3 RAM and Nvidia 8800GT graphics card with Cuda driver) takes almost a day of processing to 1980 x 1080 and about 8 hours to convert a FullHD MP4 file with multichannel digital audio. For my HD test, I set the following profile: Video WMV 9 adv. pro., res. 1280 x 720, asp.ratio 1:1, 24 fps, 2 pass CBR 3850 kbs, 95% quality setted, audio 9.2 WMA Lossless 1 pass quality VBR 100 48000 kbs 5.1 ch. The file of 3.95 Gb obtained is little smooth flow with some slow. Maybe I should reduce the quality setting under 95% to obtain a WMV file with the same quality of the original file? Can You help me? Thanks

I do full 1920 X 1080 video and 5.1 AC3 in about 3 hours with a quad core CPU and 4 gigs ram. I only do one pass CBR on both video and audio. I use Windows Media Video 9 Advanced Profile and Windows Media Audio 10 Professional. I set the video quality at 75 under the Video tab. I set the picture quality one click to the right of +Speed under the Other tab. My file size is around 8.5 gigs.

Hi, thanks for Your reply, I understand my first error... different framerate from original file and output file; Yesterday I have try converting in FullHD res. another time with the same (25p)fps, with 2 pass VBR 3500 kbs avg. with 75% quality on video tab with WMV 9 adv. prof. and WMA 9.2 Lossless (XBOX 360 accept only 9 version within 4 Gb for streaming from Media Center) and 75% picture quality on the "other" tab. I've obtained a 3.99 Gb file (108 minutes of video sufficiently fluid) in 7 hours of encoding. Now I know that TMPGE is my application! Thanks

I have converted 1080p mkv of over 10 gig to wmv hd at 10 gig and they stream fine though media center to a 360. I don't think there is a file size limit as such. The 360 has not been tested at bit rates over 15 mb/s though. Personally I am hoping to test this as soon as I have my avchd problem solved. I'll report back then.
Pushy

Hi, now I've new trouble, import video and audio from MKV, ffdshow don't keep Dolby Digital AC3 5.1 audio, only 2 channel stereo with defauld settings. Changing audio settings of ffdshow preview and output file are full of pulse noise! I've extract the AC3 audio with MKVextractGui application and replacing the audio source the audio is not sinchronized with video... anyone can help me? I want only a WMV HD file with Dolby Digital 5.1 audio.
Thanks, bye