Everything is sweet, except KARMA won't playback MP4 files (XDCAM-EX). These are MP4 videos files straight off my Sony EX3 video camera. Anyone?

It may just be a matter of finding a DirectShow codec that can play the files. Can you play them in Windows Media Player?

Is x264 better then CUDA in quality terms?
With x264 it is possible to encode 2-pass, CUDA only 1-pass
And what about quality?

IMHO software CPU based encoding is always as good or better than using CUDA or even Sandy Bridge. The only thing CUDA and Sandy bridge offers is speed.

After simply cutting out a short part out a Blu-ray .m2ts file, how can I tell TMPGEnc Video Mastering Works 5 to simply export the edited file without the cut out part? Does it have to re-encode it for hours?

If this can happen by setting the Output format to be exactly the same as the original .m2ts file, where can *all* original file's properties be viewed so that they can be entered correctly, is there no simpler way to instruct the program to make no other changes, just cut out the small part out of the file as edited?

That way the operation should take as long as it takes to copy paste the original file more or less. Can this be done?

Nope. No smart rendering in this program.

Thank you for your reply. I have tried to cut out a small portion out of a 30GB Blu-ray .m2ts file without success using videoredo, tssniper, h264_ts cutter, and tsMuxeR. They are just too buggy for the end result to be OK.

Any suggestions as to another one I can still try?

TMPGEnc MPEG Editor 3 and TMPGEnc Authoring Works 4 have smart rendering. As long as your Blu-ray is MPEG-2 encoded and conforms to the official specs, it will not be re-encoded except for the edited parts.

TMPGEnc MPEG Editor 3:
http://tmpgenc.pegasys-inc.com/en/product/tme3.html

TMPGEnc Authoring Works 4:
http://tmpgenc.pegasys-inc.com/en/product/taw4.html

I'm trying to find a capable video editing program.

I need these features:
import and edit wtv files (both h264 & mpeg streams)
output them as wtv files
preserve closed captions
cut commercials
open two (or more - but at least two) videos simultaneously in order to cut and paste frames from one video to another.

Can any of the TMPGEnc do these things? If not, can you point me in the right direction?

TAW4 can import MPEG-2 wtv files and cut commercials, but it cannot output as wtv since this is a program for making DVDs, Blu-rays, and DivX Ultra.

None of the TMPGEnc products can output wtv files nor can they import h.264 wtv. TMPGEnc products with a cut-editor can cut commercials and combine two or more videos in any way you want, though not through copy and paste; it's more a process of splitting clips and then arranging the pieces.

Check out a program called "Videoredo." I have it alongside of Masterworks 5. It can output wtv files, and it has an auto-detect commercials function that edits them out automatically. It can also convert to other output types, but I like the options available in Masterworks 5 for converting. To cut and paste frames of one video to another I think you need a dedicated video editing program (like Sony Vegas), but they do not typically make good converting programs.
Good luck

I just upgraded from TMGEnc. However, where it used to take seconds to import a file to work on (.avi, .mkv, .mpg, etc), it now takes almost 30 seconds for each file to come in. Is there a setting I need to adjust? Thanks!

Figured it out. I check OFF a bunch of the file readers so it is using DirectShow.

I'm having the same issue, mucking around with various codecs isn't helping.. Exactly how did you fix it?

Import chapters from mp4 file.

I purchased the upgrade to 5, but have not been able to get it to install. Any ideas??? I double click the exe file it goes through the install, then an ugly gray box pops up with message: Install Failed OS--------

Has anyone else run into this error? Am running Quad Xeon 3.4GHz and 4GB RAM - should be enough to make it run. Windows XP Pro

Is this software compatible with XP or is it Windows 7 only??????

Do you have SP3?

XP Pro does not have SP 3, the last update for 64bit XP Por was SP2. This is not a 32bit system.

Got no helpful support with this problem other than that the software does not work on 64bit systems and toght luck. NO REFUND, and now they have blocked the licence on my version 4. This company stinks. They are useless and have a bad product with no support.

DO NOT PURCHASE THIS PRODUCT FOR A 64BIT SYSTEM. IT DOES NOT WORK.

I'm not sure exactly why you are having issues with your particular install attempt and perhaps, by now you've solved it. I just want to let everyone know that I've been using TMPGEnc products for years now; TMPGEnc 2.5 all the way up to VMW 5 and including the DVD creating tiltes. All of these run just fine under 64Bit OS's from Microsoft. I urge everyone to stop blaming OS and software vendors for the users inability to READ software and system requirements prior to purchasing and installing them. 99.9% of all computer problems start between the Keyboard and the chair while the remaining happen honestly.

Hallo,
Is this possible with this software to get a 25P MPEG2 file from a source 24P MKV file by speeding up the source stream - NOT by adding a duplicate frame.

(and to get a 24P MKV movie from a 25P source by slowing down)

Regards
arturrol

">" EAccessViolation TMPEGENc4XP exe/55E9AB69 error 55E98869 What can I do?

When using TPMPG4Express, I was able to convert .vob/.mpg video files to .mp4 files with almost the same high quality at about half the file size.

With the new Video Author 5, the rendering menu is different and the file size savings are now only about 20%.

Being a total dweeb when it comes to understanding any of the settings, I am asking for assistance is telling what settings in Version 5 should I be using to get the best quality mp4 at about 50% the file size of the original vob/mpg2?

Here's what I had in Version 4 Express:
Video - Main
4.1 > less
720 x 480
29.97 Progressive
2 pass variable
3500 - 9000
63 motion search
0 bit rate buffer
NTSC
detect scene change
Audio @ 44100 224kbs

What do I need to set in Version 5 to get comparable (or even better) conversion results?

BUMP - anyone? - BUMP

Question:

I am trying to convert a video deposition from VOB files to MPEG-2.

If one clip uploads into a “New Project”, I can't figure out how to upload additional clips.

Also, am getting Error Message: ''Unsupported File. Error: 0x80048003''.

Is there a class I can take to master this program in Houston?

Help! Thank you.

PattyValenciaRealtor@yahoo.com

I have an authored disk. Has 5 tracks. I want to change one of them. I have long since deleted the project file. Is there any way I can retrieve the menu design from the disk?

Otherwise I have to recreate it from scratch.

Alternatively, could I author a new disk with just that track, and then rename the created files to the correct numbers (VTS_03_0.BUP, VTS_0_0.IFO, VTS_03_1.VOB) and replace them in the file set and reburn?

In TMPGENC Xpress 4.0 when I changed the subtitle control to FFDshow/External in Shark007 codec pacakage (similar to K-lite, Winodw 7 Codec) I was not only able to import the subtitle along with video and audio but the font size style and decoration that was embedded as attackement in MKV would be imported also.

But now that Video Mastering Works is able to import MKV directly I cannot import subtitle along with audio and video anymore. Is there anything I can do to achieve this? If not would be a great addition.

You may have to disable the reader that is reading the mkv file in TVMW5. After you import the mkv, go to the Clip Properties tab and there should be a listing of what file reader was used for the video and audio streams.
Once you know the file reader, go to Options-->Preferences-->Input/Output Format List-->Input Plug-ins and then uncheck that file reader.

The purpose is to get the DirectShow file reader to read the file instead of the default one and thus use your other codecs.

I tried unchecking the file readers as you suggested and now the mkv files are using DirectShow. But I'm still unable to get the subtitles, either on the Video Clip Properties nor the ABC filter. Any further suggestions? Thanks!

I tried unchecking the file readers as you suggested and now the mkv files are using DirectShow. But I'm still unable to get the subtitles, either on the Video Clip Properties nor the ABC filter. Any further suggestions? Thanks!

>I tried unchecking the file readers as you suggested and now the mkv files are using DirectShow. But I'm still unable to get the subtitles, either on the Video Clip Properties nor the ABC filter. Any further suggestions? Thanks!
>

Honestly, I don't know. You have to ask geneariani how he did it in 4.0 XPress.

For those who are interested of importing MKV with subtitles under TMPGENC xpress 4.0

I have installed shark codec package. I assume they are other packages and tweak tools to do the same also.

I launched Shark's application settings using "right-click" and "run as admin" (for windows Vista and above). Under the h.264 tab, on the right part, I changed "use Ms Codec" to "Use FFDshow's codec". This will allow you to import mkv into tmpgenc

Under config tab in subtitle control section I select FFDShow/External.

Exit the Shark config tool.

Now I can import MKV along with subtitle and all the styles and attachment that came with MKV

Thank you, geneariani! However, I am on an older version of Windows (5.1, service Pack 3). Are the Shark 007 codecs specifically for Windows 7 or can I use them on my older setup too?

Morruby;

according to shark codec folks Their vista pacakge is compatible with windows XP

http://shark007.net/vistacodecpackage.html

tkrave: your suggestions worked prefectly now I can import subtitle with all style and font attachments into Video Mastering Works.

thanks