Trying to add different format MPG files to TMPGENC DVD author eg 16.9 and 4.3

IS there any way of doing this ?

Many other programs allow this

Thanks

That's VERY simple... Read the manual!
Each file has to be imported as an single track.
You can't combine different formats into one track.

When trying to access a video I imported onto my hard drive with TMPGEnc I get a messege saying "The image is invalid." What is going on?

What do you mean access a video?
Play it with a media player, open it with TMPG...what?

I'm having the same thing when trying to load any .mcf template with TMPGEnc 2.5 plus.

It comes up with 'The Image is Invalid'

How come?

Jack

DOH - What a dufus I am!

I didn't realise that one has to load the .mcf templates using the LOAD and SAVE buttons at the bottom right of the main window, along with the 'SETTINGS' button.

Grrrrr

Looks like I'm gonna have to re-do my vidz

Jack

hi i need the last version 3

Just download it...

buy it.

Hi,
Iam trying to convert a mpeg2 file to a vcd file using the free version of TMPEGnc. On opening the source, only the video file is grabed and the audio file does not import in. What shoulkd I do??

What format is the MPEG2 file. Is it in VOB form?
If it is ordinary MPEG2 then you don't need to re-encode the audio anyway. Just demultiplex it with the MPEGtools.

Hi,
Thanks for the reply. This is an ordinary mpeg2 file which I ripped using uled movie factory. Iam trying to convert it to a mpeg1 file to make a vcd. On loading the file, only the video gets loaded in. The audio does not load in. Thus, only the video gets outputted without the audio. If I try to load the audio alone from the same file, it says that the file is unsupported. How does video from the same file loads but not the audio. Need help. Thanks1
Regards
Lishen.

Load the MPEG2 file into the simple demultiplexer in the MPEGtools. This will seperate the Video and audio. Then try and load them into TMPG seperately.

Hi,
Thankyou for the reply. I tried you suggestion. The file was seperated as video as.m2v and audio as .ac3 files. Now to convert it into mpeg1 I imported the video and on importing the audio, it says .ac3 is an unsupported formate. Tmpegnc wont open the file that it has created?? Now i've been on this for a few days and really need solutions. Your help is very much appereciate it. Thanks!
Regards
Lishen.

Ok, so it has AC3. This is what is what I guessed and why I asked if it was in VOB form.

You will need to convert the AC3 to wav. You can use a few differenvt programs for this.
One I have used in the past is called AC32WAV by PX3 or another one called AC3DEC.
http://www.digital-digest.com/dvd/downloads/showsoftware_ac3towav_28.html

Hi Lishen,

Take the AC3 file and convert it to a wav file using Ac3Decode. Make sure you click "convert to 44.1khz" and "convert to wav". Drag the ac3 file onto the program and it will convert it.

You can download Ac3Decode for free from:
http://www.users.on.net/~rsobon/bin/ac3decode821.zip

The web site is:
http://www.users.on.net/~rsobon/ac3dec.html

Next take the wav file and re-encode your mpeg2 file using the mpeg2 file as the video source and the wav file as the audio source. Make sure you load a video CD template and name your output file something different than the original file name.

You cannot simply multiplex the two files (that were de-multiplexed)unless you convert the wav file to a mp2 file. Even if you did using TMPGEnc MPEG Tools to multiplex them using the MPEG-1 Video-CD template you would simply end up with a non-compliant mpeg2 movie.

I hope this of help to you.

>Second terms are deadly games, they need to fear no one.
>

For simple cut and joining, the TMPGEnc MPEG Editor would be better than Nero Recode as only the needed sections are re-encoded?

In more detail, I have Nero Recode due to having the Nero 6 package, but noticed a loss of quality when using Nero Recode 2.1 to simply cut out a section of a VHS to DVD .VOB file to reduce its length.

I assume this means that Nero Recode re-encodes both sections again rather than just the areas with the editing? So if I want to cut out sections and have no loss of quality I should buy the TMPGEnc MPEG Editor, too?

Doing some more reading, I see that there is another frame accurate MPEG2 editor, the Womble MPEG-VCR editor, or the newer, costlier, Womble MPEG Video Wizard, that also avoids re-encoding.

How do those products compare to TMPEGEnc's MPEG Editor?

I have downoaded and installed Real Alternative 1.37. But when I tried to convert rmvb files, error message saying "rmvb file cannot open, or unsupported". Have I missed some procedures? What about the settings?

How can I converse my RMVB files to MPEG of MPEG files?
It can help me transfer my movie files to my PSP.
Help me anyway!
Thanks a lot.

The only rmvb converter out there is eoVideo.
Get that and you should be able to convert to mpeg 1, 2 and avi.

SF

Quicktime alternative and TMPEG.

How do I convert rmvb files downloaded from bt so that they can be view on tv either in vcd or dvd format.
Apparently rmvb files are not supported by TMPGenc

There are quite a few programs that allow you to convert from RM files to MEPG. Through personal experience, WinAVI Video convertor is the best. Every file comes out high quality. I have used EO Video and although it was pretty good it was very slow and sometimes it did produce corrupted files.

Once you convert it to MPEG all you need to do it author it to DVD.

It is best to search around to find other RM convertors and see which one you prefer.

K.

When i enter a certain vob into TDA , a message appears , its sais
This Is A illegal video file.
For A Standard DVD You Can Only Use

MPEG-1 or MPEG-2 Video.

I really need help on how to fix this problem, can anyone help me out?

Thanks.

there is an import function for vob files. use that instead of drag and drop the video file... ;)

This also happens with mpeg2 files so that wouldnt help me at any rate
(even correctly formated DVD standard files sometimes - it seems random)

I cant see any "import" command for VOB files either where is that?

Hey all,

I have a Finalcut Pro movie file which I would like to convert to MPEG-2 (this Mac doesn't have the MPEG-2 codec installed). TMPGEnc won't convert it directly, but I have the capability of exporting the Finalcut movie to any number of intermediate DV formats, which I could then import into TMPGEnc.

Does anyone know which DV format TMPGEnc would like that Finalcut Pro can produce? I tried one tonight which didn't work, and I'd like to avoid further trial and error.

Thanks!

I am new to TMPGEnc and I have experimented cutting and joining a short 2 min captured TV shot, which was then converted to a MPEG2 file.

I cut and joined some MPEG2 clips from that MPEG TV shot (using TMPGEnc 2.524). Then using other software I encoded the joined MPEG file (using VSO DivxToDvD software)and burnt the result to a DVD (using CopyToDvd).

I found that the finished 2 min product on the video DVD (as played with Power DVD)automatically repeated itself at the end of the joined clip instead of stopping.
Apart from TMPGEnc I have used the other software to make DVDs many times without this particular problem arising.
Is this a known problem with TMPGEnc??
Any comments appreciated

somersetlad

When attempting to encode 23.976 fps XviD sources (as verified by GSpot 2.21) into DVD-compatible MPEG2, TMPGenc 3.0 XPress incorrectly detects the source frame rate as 30 fps, resulting in jerky MPEG2 output.

These XviD sources play perfectly in a variety of players, and encode properly in NeroVision Express 3.

There appears to be no way to override the incorrectly detected source frame rate in TMPGenc 3.0 XPress, and there doesn't appear to be any reasonable work-around.

This problem exists in version 3.0.4.24 (original release) and version 3.1.5.82 (latest version as of this writing) of TMPGenc 3.0 XPress.

Codecs: XviD-1.0.3-20122004 _Final Release_
XviD-1.1.0-Beta2-04042005 _Beta Release_
Platform: Windows XP SP2 on 2 GHz Mobile Pentium 4

TMpgEnc is pretty bad at 23.97 to 29.97 framerate conversions.

Workaround:
From TMpgEnc 3.x, save the output as a wave file only, then frameserve the avi file (with no audio) from VDub to TMpgEnc 2.5x. Be sure to set the framerate conversion in VDub. Now use a DVD authoring program to create the DVD file.

You may use ffdshow or 3ivx for xvid decoding - it reports correctly the framerate to tmpgenc xpress or tmpgenc xpress correctly understands it. don't know if it is a problem of tmpgenc xpress or xvid.

>TMpgEnc is pretty bad at 23.97 to 29.97 framerate conversions.
>Workaround:
>From TMpgEnc 3.x, save the output as a wave file only, then frameserve the avi file (with no audio) from VDub to TMpgEnc 2.5x. Be sure to set the framerate conversion in VDub. Now use a DVD authoring program to create the DVD file.

Thanks for the suggestion. I suspect that work-around would indeed work, but then why bother at all with TMPGEnc 3.0 XPress? Use a separate AC3 encoder instead. With ffmpegGUI, there's not even a need to first split out the audio into a WAV file. For that matter, why then bother with any version of TMPGEnc -- any MPEG2 encoder could be used, some of which are both better and faster than TMPGEnc.

The principal attraction of TMPGEnc 3.0 XPress (with the AC3 plugin) is simple yet flexible, one-step encoding of good quality DVD-compliant MPEG2 with multiplexed AC3 audio. Take that away, and you might as well use other tools that are faster and/or better.

>You may use ffdshow or 3ivx for xvid decoding - it reports correctly the framerate to tmpgenc xpress or tmpgenc xpress correctly understands it. don't know if it is a problem of tmpgenc xpress or xvid.

I've found ffdshow to be too unstable/problematic to use. The 3ivx codec (instead of the XviD codec) does indeed solve the problem of incorrect source frame rate, including the correct Video Mode (3:2 pulldown playback), but the resulting MPEG2 video from TMPGEnc 3.0 XPress is still jerky. (Output from NeroVision Express 3 is much smoother.) Thus TMPGEnc 3.0 XPress apparently has a compatibility problem with the XviD codec (which is probably a TMPGEnc 3.0 XPress problem given that other applications see the correct source frame rate), and doesn't do a terribly good job of frame rate conversion in any event (as reported by others). Regardless, thanks for the suggestion.

Don't do any framerate conversion. Encode it in 23.976 fps with 3:2 Pulldown on playback. TMPGEnc is able to do this corretly since version 0.12a...

>Don't do any framerate conversion. Encode it in 23.976 fps with 3:2 Pulldown on playback. TMPGEnc is able to do this corretly since version 0.12a...

This thread is about TMPGEnc *XPress* (*not* TMPGEnc or TMPGEnc Plus)!

TMPGEnc XPress can do what you suggest when the 3ivx code is used (rather than the XviD codec), but the resulting output is STILL JERKY!

UPDATE: AviSynth can solve the problem! Use AviSynth to frameserve the XviD source into TMPGEnc 3.0 XPress, and TMPGEnc 3.0 XPress WILL then properly encode DVD-compliant MPEG2 and AC-3 audio output, smooth instead of jerky!

change the framerate from the avi before you encode it with avirate and rip the audio out of it with vdub and change the framerate from the audio with ac3machine encode de avi with tmpgenc on the framerate you change it to. to a M2V file and join them with ifoedit and you have a good Q dvd in the framerate you like

The solution to the 30 fps problem with Xpress that I found to work was to deselect generic MPEG-4 support in the DivX codec. Once I did that, any AVI file I loaded that had been encoded with XVID had their correct frame rate showing, along with the correct number of frames.

Many, many, many thanks for your solution.

>The solution to the 30 fps problem with Xpress that I found to work was to deselect generic MPEG-4 support in the DivX codec. Once I did that, any AVI file I loaded that had been encoded with XVID had their correct frame rate showing, along with the correct number of frames.