I want to record my vh tape to my hard drive and make it into a dvd movie. Is this a rigth program and if so can add couple steps how to Newby sorry . thanks 4 your time !!!!!

To convert from VHS to DVD you have to have a video capture card installed in your system in order to capture de VHS video to digital, once in the HD the video can be converted to any video format supported by TMPGEnc, I use the FLYVIDEO 2000 capture card and, as a suggestion you should capture the video in AVI format, the files will use a lot of HD space but the quality will be the best.

disculpen pero el software esta en ingles y no entiendo bien .. estoy tratando de generar un mpg de un archivo Avi... tengo que volver a hacer todo de nuevo cada vez que abro el proyecto... a pesar de haber generado mas de la mitad de archivo ???

Para convertir un avi a mpg lo que se hace es que se agrega el archivo a la lista y se le da el formato de salida, si por alguna razon el proceso se interrumpio durante la codificacion hay que inciar el proceso desde el inicio, si se creo una parte del archivo en formato mpg, se inicia el nuevamente el proyecto y se le indica al programa en la seccion CUT EDIT el rango del video que no se codifico en el proceso anterior y luego se unen los archivos resultantes con el TMPGEnc trial o el PLUS.

>Para convertir un avi a mpg lo que se hace es que se agrega el archivo a la lista y se le da el formato de salida, si por alguna razon el proceso se interrumpio durante la codificacion hay que inciar el proceso desde el inicio, si se creo una parte del archivo en formato mpg, se inicia el nuevamente el proyecto y se le indica al programa en la seccion CUT EDIT el rango del video que no se codifico en el proceso anterior y luego se unen los archivos resultantes con el TMPGEnc trial o el PLUS.

i was able to convert me OGM to a Xvid(DX50) format and did it a second time in DivX 5.1.1 format (both AVI)...both with sub using Texsub filter in VRDubMod. Once that was done i was able to watch both files in WMP9 and i they had sub...video...sound all in sync (was so happy at that moment).

Then I decided to use TMPGEnc Plus to change it into a SVCD. Now i dont know if its cuz of my settings or not, but when the conversion is done( and yes i can see everything during the conversion) and i play it back on my PC there is only sound and no image. I dont get any codec error before playback starts. Since TMPGEnc doesn't read the audio of the Xvid or DivX i made (unless you put DirectShow Multimedia File Reader as higher priority in VFAPI plug-in settings), i used the mp2 i created with OGM to SVCD easy Guide for the audio( i used it as well to create my avi in VRDubMod). I've done other Animes before this one( already in AVI from the start ) and I've been able to watch them after converting them to mpg to see how then turned out.


Here are my questions:

-What do you think the problem is?
-If possible, what are the settings used in TMPGEnc to watch the SVCD on my 32" TV so that sub is not cut off at the bottom or sides?( for previous anime, i've had to use Center(custom) and set it to 480X444 to get the sub in and even that sometimes cuts off the sub at either end and is at the limit of the bottom of my TV screen.


Oh and here's how i made my Xvid and DivX avi with VRDubMod if it can help:

1- Load OGM in VRDubMod

2- In Stream list, disabled everything inside and add jap Audio file created with OGM to SVCD easy Guide

3- Select Direct stream Copy and "Save AVI as"

4- Re-open new AVI and open filters

5- Add Textdub or Subtitle filter and choose "subtitle".srt created with OGM to SVCD easy Guide

6- Set video to full processing and go into Compression

7- DIVX: Selected Divx 5.1.1 codec>>click configure and set Kbps( using bitrate calculator in Gordian Knot)>>then Save AVI as

Xvid: Selected Xvid MPEG-4 codec>>click configure>>Advance options>>Under Debug tab>>FourCC used: DX50)>>then Save AVI as

8- Encode to MPG with TMPGEnc Plus


Hope this helps solving my prob...i really need a solution

Thanks in advance

P.S. why do i get in TMPGEnc Plus when im about to start encoding this msg:

Your are trying to create an MPEG-2 file

To play MPEG-2 files, DVD player software needs to be installed on your system.


Does that have to do with anything and it only appears if i dont use the wizard.

Also why when i put DirectShow as higher priority( first in the list) in VFAPI does TMPGEnc Plus crash? but if i leave it at default everything is fine...

Whoa that's a lotta questions for something so simple!

First let me ask why are you creating an AVI out of the OGM file?

Why not just encode the OGM to SVCD with TMPG?
If you want to add subs just use 'Direct VOBSUB'.

If you want to watch OGM files with media player and subs simply install the Ogg Vorbis DirectShow filter and 'Direct VOBSUB'.

how do you get the Mp3 for a Movie what's the software that you use?

Hy!
I have following questions:

Can TMPGEnc produce low bitrate Mpeg1
for Internet streaming? <= 400 Kbit

A problem with streaming + vbr:
You can't look to the end of a stream to calculate
the correct average bitrate and playtime.
Does any VBR - Header exist with such infos to solve this problem?
-(Like MP3 VBR)- Or is it possible, that TMPGEnc writes the average Bitrate
inside the first Sequence-header (instead the NON-average bitrate).
Then it would be possible to retrieve the correct playtime without looking to the end of the stream.

thanks!

It can, but why would you want to use MPEG as a format for streaming?
The quality would be totally unacceptable when you could use a better format with a better compression ratio such as WMV and achieve much better quality for the same bitrate.

Also I don't understand what you mean about a problem with VBR and streaming.
The timecode information is in the header of the MPEG, so why would you need to scan to the end of the file to read the play time?

If you want to calculate the correct average bitrate to use for the playtime and file size you wish to create then simply use 2 pass encoding.

Maybe I have got your issues confused, but I answered best I could with what I could decipher from what you posted.

Thank you for the answer!!!

Streaming Mpeg1/2 is important for me as long as my self developed
Java-applet supports only Mpeg1/2. Surely Mpeg4 is better....
But I want primarily test my own applet.

The timecode informations are in the Header?
Where? Can you give me more links to mor informations?

I have only found following timecode informations inside the gop header:
NOT the total playtime length or the total frames, instead
the current playtime of the current GOP Header.
That means: The STARTING GOP Header contains: 0 sec, 0 min, 0 h
The FOLLOWING GOP Headers contains something of e.g.
: 1 sec, 0 min, 0 h
etc.
: 2 sec, 0 min, 0 h
etc.
The LAST GOP Header contains the full playtime e.g.
32 sec, 45 min, 1h

So I must have a look to the last GOP-Header.

If you know of additional header infos, please tell me!

Thanks for the answer.

hey all, got a question about audio.........or the lack there of. i have an avi file that im converting to mpeg2. when i first tried it i assumed that the audio was ac3, and i converted it to wav with virtualdub. but now i still have no audio.im a newbe and very confused. thank you

How big was the WAV after you converted it and what is the length of the movie?

I have a similar issue. I have a 732 MB avi file that I suspect is derived from an original PAL DVD. The aspect ratio is wrong (image is distorted), being somewhere between 4:3 and 16:9. In order to correct the aspect ratio I selected an original aspect ratio of DISPLAY 4:3. The m2v file (3.24gb)displays the image correctly but the wav file, which is 1.026gb plays for only 5 seconds. The total playing time should be about 1hr and 26 mins.

Any suggestions? Is this a function of the change in aspect ratio?

I was able to find same problem by other user on this board, but the issue wasn't resolved. So I figure I'll post my issue in a new thread to see if anyone knows the problem!

I am having problems cutting an MPEG into 2. (1.2GB MPEG, attempting to cut into 600~MB MPEGs)

Here is exactly what I am doing;

TMPG - File - MPEG Tools... - Merge & Cut tab - Add button - (browse and select MPEG) - Edit - Move slider bar to half of movie, preview window shows the middle of the movie, but the time (lower right corner, a.k.a. range) shows 00:09:00. (If I click the play button, it simply counts from 9 minutes up) If I move the slider bar to end of movie, it displays 18 mins. I select the first half of the movie and click 'OK'. - Click Run - it extracts a 80MB file of the first 9 minutes of the movie.

This happens on multiple MPEGS - some of which I created via TMPG others I haven't.

Also, there are some MPEGs it works fine on cutting!

Heres a side note to the problem I posted above.

If im in "Edit merge item" screen (where you select where to cut the movie), If I play the movie from the beggining, the movie plays. At about 9 minutes into the movie, the slider bar appears to be about halfway. At about 18 minutes, the slider bar appears to be at the end and the timer stops counting (stays at 18 minute) yet the movie continues to play. If i manually click the slider bar to near the end, the movie actually jumps to near the end but timer shows about 18 minutes. (If I click the slider bar in the middle, it actually shows about the halfway point of the movie, roughly 60 minutes into the film, but the counter on the screen shows 9 minutes.

Hope someone can help, i'm really stuck on this one :(

Heres a side note to the problem I posted above.

If im in "Edit merge item" screen (where you select where to cut the movie), If I play the movie from the beggining, the movie plays. At about 9 minutes into the movie, the slider bar appears to be about halfway. At about 18 minutes, the slider bar appears to be at the end and the timer stops counting (stays at 18 minute) yet the movie continues to play. If i manually click the slider bar to near the end, the movie actually jumps to near the end but timer shows about 18 minutes. (If I click the slider bar in the middle, it actually shows about the halfway point of the movie, roughly 60 minutes into the film, but the counter on the screen shows 9 minutes.

Hope someone can help, i'm really stuck on this one :(

Heres a side note to the problem I posted above.

If im in "Edit merge item" screen (where you select where to cut the movie), If I play the movie from the beggining, the movie plays. At about 9 minutes into the movie, the slider bar appears to be about halfway. At about 18 minutes, the slider bar appears to be at the end and the timer stops counting (stays at 18 minute) yet the movie continues to play. If i manually click the slider bar to near the end, the movie actually jumps to near the end but timer shows about 18 minutes. (If I click the slider bar in the middle, it actually shows about the halfway point of the movie, roughly 60 minutes into the film, but the counter on the screen shows 9 minutes.

Hope someone can help, i'm really stuck on this one :(

Yikes!! Sorry for the duplicated posts, not sure how I managed to do that.

How do you open rm file with AVISynth? Is it even possible?

Download and install Realmedia alternative then use 'Directshowsource' in a script like the one below.
http://www.codecsdownload.com/cgi-bin/TopDown/download.pl?file=0053



DirectshowSource("E:movieReal_Media.rm", FPS=29.97)

'FPS' is the frame rate of your movie.

Sorry about the link try this one instead:
ftp://www.powen.com.pl/pub/Multimedia/RealPlayer/realalt123.exe

I am trying to encode a video file to MPEG-2 that was originally encoded with DivX 5.0 at a resolution of 448 X 336 (4:3) but I get "scan line index out of range (336)" error. What is the maximum allowable value of the input file height and do I have to reencode to this coarser resolution with DivX before I can encode to MPEG-2? I also tried encoding with NTSC 16:9, which I have used before on input files that were 640 X 352 (~16:9), even though I know the output file would be "squashed vertically", just to see if it would work but got the same error. Has anybody else encountered this error and how did you work around it? Any helpful comments would be appreciated. Thank you.

Open the AVI in Virtualdub then frame serve it to TMPG.

I am trying to put together a family video that has 6 clips. The overall file size limit isn't exceded, (its about 4gb) but when I have the program make a folder with the VOB's in it it always cuts the last video clip down to about 1/4 it's correct size. All the other clips are fine, the menu works fine, what is happening?

BTW: I like TMPGenc because it's easy to learn, makes menus that work and above all has a play all feature.

Thanks

My source file (xvid) is detected wrongly as 30 fps by TMPGEnc 3.0 Xpress.

TMPGEnc 2.5 detects 25 fps as does virtualdub and VideoToolbox.

I am unable to change the frame rate setting as it is grayed out, so I am forced to use TMPGEnc 2.5 instead.

Any solution?

Guess not. This bbs really moves! I'll answer my own question.

The encoder is not in error. It is the VFAPI reader:DirectShow Multimedia File Reader that is at fault. So what is this crap and how do I fix it?

I'll answer myself next month no doubt.

http://www.doom9.org/Soft21/Filters/ffdshow-20040808.exe

Sorry, forgot to say:
I had the same problem, I installed - ffdshow from doom9.org, and it fixed the problem:
http://www.doom9.org/Soft21/Filters/ffdshow-20040808.exe

Thanks, that fixed it!

I had the same problem for xvid movies and for some divx movies. I installed - ffdshow, and it fixed the problem.

What does AviSynth do? How does it work with Tmpgenc? And why can't I load .avs file with Tmpgenc?

http://avisynth.org/

When I played the avs file I get only color red, yellow and blue. Is that suppose to happen?
Here's my script:

AviSource("c:AnimeNaruto1Naruto - 01.avi")
ResampleAudio(44100)
LanczosResize(720,480)

No, try Directshowsource instead of AVIsource.
If it still happens then stay with Directshowsource and install FFDSHOW then try again.

Thanks it work.